APP --- SOME DOUBTS.....PLZ HELP

HI GUYS,,
I have some doubts in APP.
1. why do we give next payment date in F110 while we are running payment.....
2. can we do partial payment for one line item through running APP....
please help me out..
Thanks in advance
Regards,
pavan
Moderator: Please, avoid using SMS language and posting basic questions

HI,
1. If your provid ethe Next payment run date then system will consider below documents.
current run date to next payment run date
in between any Invoices are getting panalities then those will consider in this current payment run.
2. partial payment not consider.
3. APP will consider downpayments.
Reg
Madhu M

Similar Messages

Gudevening sd gurus i have some doubts plz help me out

1.how do u settle rebate
2.how the item condition type in pricing picks the price without assigning the acesssequence to condition type?
3. why do we maintain pricing pricing procedure for free good delivery?
4. we can six different kind of dates in sales oder , how these dates are determined in sales order plz in detail?
5. how can link the delivery document to shipping doc where do we have connection?
5.if i want to change the moment type 601 to 523 , what are thing need to be done?

Dear Venkat
Please dont post too many questions in one thread as you will not get feedback to all questions.
1) Rebate Settlement
You can partially or fully settle a rebate agreement.
The system uses the services rendered date (which is the billing date, if you are shipping products) to determine whether a billing document qualifies for rebate processing. To qualify, the date must fall within the validity period of one or more rebate agreements.
Since it is possible for the billing date to be later than the services rendered date, you may need to allow some time after the end of a rebate agreement's validity period before final processing of the rebate agreements. If the volume of your sales rebate processing is high, you can collectively process rebate settlements as a background task.
2. Condition type in pricing
If I understood your question correctly, I dont think without maintaining proper access sequence, your pricing condition type will flow into sale order / billing
3) Free Goods Delivery
If you want to generate a sale order in SAP, you have to have a pricing procedure with respective condition types
5) Movement Type
Please check with your MM / FI on the impact. You can change the movement type in your schedule line category
thanks
G. Lakshmipathi

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple

Can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help

can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help
its says that its currently not availabe
I have so many work counting on this programme plz help

Thank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards

After connecting my iPhone 4 to my computer the itunes detect my iPhone 4 but it doesn't syncs any music, apps, videos, etc. plz help me wat should I do now...

After connecting my iPhone 4 to my computer the itunes detects my iPhone 4 but it doesn't syncs any music, apps, videos, etc. plz help me wat should I do now...
N does Siri works in India on iPhone 4???

http://support.apple.com/kb/HT1386
Go through your syncing prefrences! Make sure what you want to sync is all checked off

HT4009 My clash of clans always tells me to go to this support thing when I try to do an on app purchase. Plz help me.

Plz help me

If you're attempting the purchase with only iTunes Store credit, supply a credit card number; it'll be used instead. Otherwise, contact Apple Support as instructed and wait for them to either resolve it themselves or say what needs to be done to solve it; being told to contact the iTunes Store staff means to do that and not to post about it here.
(87295)

My problem is that, in update, it says, I have (2) updates on my iPad 4. But when I go to update, there is nothing to update in the App Store. Plz Help

My problem is that, in update, it says, I have (2) updates on my iPad 4. But when I go to update, there is nothing to update in the App Store. Plz Help

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

Some one plz help me i've done everything i could think of PLZ HELP!!!!!!!!!!!!!!

Hey everyone last night my Zen touch froze up on me while i was listening to it so i hit the little restart botton and i thought everything was cool until i tried to do anything in recovery mode first i tried to do the clean up but nothing happened so i went down to format all and a sign popped up saying harddisk problem so i went to reload firmware and again the sign popped up saying harddisk problem so i went to reboot and that worked but it put me right back in to recovery mode and i just want to get out of recovery mode and listen to my music i have tried everything someone plz HELP ME!!!!!!!!!!!!!!!!!!!!!!!!

i just got it though like 2 weeks ago so why would it be dying
Hardware can be quite unpredictable at times. I ever bought a 20Gb hard disk and when I fix it on back at home, it just died. That is a case I never forget. Take back to shop and they do a on exchange. It is only for one day right out of the box fresh!!!! And sometimes the fault seem to be in that particular batch that is shipped in. So one got fault others all got the same fault.
For your case maybe it is the same? :smileytongue:

Really need help on how to write this program some 1 plz help me out here.

i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
     public static void main(String[] args)
          double length, width, glass_cost, perimeter, frame_cost, area, total;
          Scanner keyboard = new Scanner (System.in);
          System.out.println("Enter the length of the window in inches");
          length = keyboard.nextInt();
          System.out.println("Enter the width of the window in inches");
          width = keyboard.nextInt();
          area = length * width;
          glass_cost = area * .5;
          perimeter = 2 * (length + width);
          frame_cost = perimeter * .75;
          total = glass_cost + frame_cost;
               System.out.println("The Length of the window is " + length + "inches");
               System.out.println("The Width of the window is " + length + "inches");
               System.out.println("The total cost of the window is $ " + total);
     Enter the length of the window in inches
     5
     Enter the width of the window in inches
     8
     The Length of the window is 5.0inches
     The Width of the window is 5.0inches
     The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AM

Adhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
%

I only have sound from my iPhone 4s wen its connected to a pocket boom box other than that I have nothing can some one plz help

Can anybody help I have no sound apart from wen I use it threw Bluetooth

Hi Donh1981,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are not getting any sound from your iPhone through either the external speaker or the headset jack, you may find the troubleshooting steps/articles listed in the Acoustic section of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

In BAPI creation iam getting some problem plz help me in this issue?

Hi All
    I am new to BAPI.
    I did one program by watching the below link
    http://www.saptechies.com/step-by-step-procedure-to-create-bapi/
    By watching that tutorial iam able to develop up to the creation of BAPI.
    While the releasing of my BAPI object its showing the following error
    Released object types must be transportable.
    While the releasing the method its showing the following message
    Object type components have higher release level than oject type.
    If any one knows how to resolve this issue please help in this topic
    Thanku.
Regards,
K.S.L.Neelima.

Hi Neelima,
As the error message shows: Released object types must be transportable
This means you have saved the object type also as local object under $tmp. You should not do this. Create the object type under any dev package and then try releasing it. This will work for sure.

Adobe Premiere Pro CS5 APP CRASH. PLZ HELP!

Hello, This is my first time posting here
So Adobe Premiere Pro CS5 randomly decided to start crashing on me.
First here are my sytem stats:
Windows 7 Home Premium
model: VAIO
Processor: Intel(R) Core(TM) i7 CPU     Q740 @
1.73 GHz   1.73 GHz
installed memory(RAM) 6.00 GB
system type: 64 bit
The error message I receieve when Premiere pro Crashes:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Pro.exe
Application Version:    5.0.3.0
Application Timestamp:    4ce382d1
Fault Module Name:    Display.dll
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4ce34399
Exception Code:    c0000005
Exception Offset:    0000000000076198
OS Version:    6.1.7600.2.0.0.768.3
Locale ID:    1033
Additional Information 1:    7113
Additional Information 2:    7113dc2716522a4a2de374964462f9ff
Additional Information 3:    f442
Additional Information 4:    f4429beec7c520d1488e5ecd10601a50
So upon opening Premiere everything seems ok. There is no lagging or glitching, I can click tabs and everything is fine.
When I import a .mov file or any of my previous premiere pro files I have no issues.
The problem starts when I try to scrub through the timeline. As I scrub through it nothing shows up in the preview area. Sometimes it is blank and other times it only shows the image that the scrubber was set on. The program seems ok as I'm scrubbing, there's no weird lagging and the program doesn't freeze until the box telling me "Adobe Premiere Pro CS5 has stopped working" pops up.
The same thing happens every time. I do not know why.
Does anyone know what I need to do to fix this?
My copy of Premiere Pro is legal and bought.
The sooner I can resolve this the better. I have other computers I can use premiere pro on but I would like to be able to work on my own laptop when I'm at home :|.
I've also tried updating the program but that didn't do anything either.

It turned out to be a display problem with my computer's settings.
For some reason my computer changed its color mode from 32 bit to 16 bit, which was also making my photoshop gradients show up choppy.
I changed it back and problem solved!!
Thankyou though!

Searching for some software plz help

i was wndering if anyone knew of software for a mac that is an autotyper....like a macro...that is freeware........or has a trial...something that i can type text in and set the repeat rate..then it automaticly pastes that text for me...
thanx
any help is apreciated

iClip Lite is freeware and will put multiple clipboards in your Dashboard.
iKey is $30 but it may do more of what you're looking for.
-Doug

How do I install WatsApp on my iPad air. Plz help

I have recently got an iPad air so I don't know much about it. I want to install WatsApp chat on my iPad but I didn't find it in iTunes and App Store. Plz help me. How do I go about it.

Since the Whatsapp is keyed to work with your mobile number and the iPad is not a phone, this app and service does not officially work here.
However, some people have come up with a clever hack that sort of gives you Whatsapp functionality on the iPad, with some limitations. Search this forum for threads detailing the process.

I have forgotten my security questions and would like to reset them... My reset email is an old email and I no longer have it. How do I change this reset email? Someone plz help!

I have forgotten my security question answers and would like to reset them. My reset email I no longer have because I have gotten a new email. How do I change my reset email to my new email? Some one plz help!

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
Changing the rescue email address requires supplying two of the answers. They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105770)

APP --- SOME DOUBTS.....PLZ HELP

Similar Messages

Maybe you are looking for