App store doesn't work on yosemite. how can I solve the problem?
app store doesn't work on yosemite. how can I solve the problem?
Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Similar Messages
-
I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.
You haven't a problem. You simply did not read the iWeb Help :
-
I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?
Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters. -
Since installation of Mountain Lion (10.8.2) the latest version of Sony Image Data Converter (Ver. 4.6) doesn't work anymore. How can I solve this problem?
HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
App Store doesn`t work still today, i can`t to join from any devises
App Store doesn`t work still today, i can`t to join from any devises
As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit -
Hi, my mail applicatin is not working properly. It says cannot get main...the connection to the server failed but everything else is working ok. How can I solve this problem?
The connectivity test indicated that there was a problem with the user's ActiveSync folder, typically fixed by checking the box "Allow inheritable permissions ...".
Since it already was checked and even by removing the inherited permissions and then re-inheriting them didn't do the trick, I ended up just deleting the whole thing and then made a new duplicate account and blank mailbox. That was pretty drastic
but it fixed the problem. After restoring his mailbox contents from backup, the user is now a happy camper.
The connectivity test tool was helpful because the external URL was blank so I filled in the URL. But ActiveSync was working fine for everybody without the URL before although I don't know why it did work without it.
The other funny thing is on one of my iPads I am able to synch my mailbox and also the user's mailbox but on another iPad it just wouldn't synchronize when it worked before I added the external URL. The iPads have the same OS version so I
just don't understand it. Oh well.
Thanks for your help. That was a good tip!
WC -
I HAVE TO INSTALL A PRODUCT CALLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??
if you try to install an app that depends on adobe air, you should be prompted to download and install adobe air (unless it's already installed).
you can download and install directly so you're not prompted by that app, Adobe - Adobe AIR -
The trakcpad can not move files not even on the desktop! how can i solve the problem?
While i was using my pc, suddenly it stopped working and i was not able any more to move folders on the desktop or move them from the desktop to a usb. How can i solve the problem???
In Finder's menubar, Finder > Preferences > General tab > check external disks
-
my ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??please help me
That symptom is covered here. However, you may have a hardware problem caused by the drop. and an appointment at the Genius Bar of an Apple store may be in order.
iPod touch: Hardware troubleshooting -
i was updating my i phone 4 to ios 7 , and this message appeared " This device isn't eligible for the requested build" , how can i solve the problem?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Copied from this website.
http://support.apple.com/kb/TS3694#error3194 -
MY IPOD IS RECOGNIZED BY THE PC (WIN 7) as a digital camera. ONE WEEK AGO WAS SEEN AS hd. How can I solve the problem?
First, try disabling the camera notification for the iPod. See this article for details on how to do this.
http://support.apple.com/kb/TS1500
B-rock -
With everything i want to delete the iMac wants my password, before it was not like that, i'm getting crazy of it.. Even with pics he's asking for my password..
How can i solve the problem and delete stuff without filling in my password every time..
Already thnx for your support and help..Normally, that's caused because of a permissions problem. Have a look at this site > http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919
-
I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.
hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi -
Photoshop Element 9 is not running on my new Dell E7240 laptop. Erreur :231:10. How can y solve the problem. Is it a license problem? My PC is very new, and PS9 is al little bit older.
fixed with this method:
http://bbs.archlinux.org/viewtopic.php?pid=319710 -
I'm a Mac user, at the start of Adobe Lightroom I receive an error of changing modules. How can I solve the problem?
Error changing modules | Lightroom
Mylenium
Maybe you are looking for
-
ASR1001 High Memory Usage - Healthy?
Hi, My SolarWinds NPM shows very high memory utization (up to 99%) on all ASR1001. CLI outpu belows confirms this: ---------------sh platform software status control-processor br Load Average Slot Status 1-Min 5-Min 15-Min RP0 Healthy 0.11
-
Different Chapter sets on same track/story
don't know if this question is asked before. I have a footage of a story with 30 chapters, & there are 7 songs within the footage. Song 1 is somewhere in chapter 2, Song 2 is in chapter 7 etc.. which to be access on a separated menu. After created a
-
Inactive field Company code in production
Hello all, in the production system and in transaction PPOME I can change the value in field Company code (folder Account assignment) for the parent org. unit. If I select an org. unit which hangs from the parent, then the field is inactive and I can
-
Inspection lot result recording
Hi, Some of the characteristic specification are fixed and we want it to appear as it is while result recording. So please confirm how it can be achieve. For example : If for product A our specification(inspection plan master) is moisture = < 2. So w
-
ASA 5510 denying local DNS Query
I have a ASA5510 ASA v7.0.8 in routed firewall mode. It is setup as the internal router and default gateway. I was asked to set up a wireless router, I chose a D-Link DIR-815 (we are a small buisiness). I have it all set up but I cannot get any name