App Store for earlier versions of Snow Leopard?

Is there any way to install the App Store app on a computer without upgrading to the version of Snow Leopard that introduced it?

No. AFAIK, it requires at least 10.6.6.

Similar Messages

Reinstalling lion from app store, can I still have Snow Leopard on a partition?

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Snow Leopard Install DVD v10.6.2. When I select it, a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing Snow Leopard HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in Snow Leopard now have the icon circle saying that it is not supported by Lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading Lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
I have now decided to download Iion again from the Apps Store, got the option key to work and as of now it is slowly downloading. I plan to make a bootable DVD of Lion before installing it again. I also can create a partition called "Lion," since I deleted my partition called "Snow Leopard," or first created a partition called "Snow Leopard" since I deleted it again from the HD. Since I still have the original Lion install on my iMac, if I create a new partition can I then get the "Snow Leopard," disk to install on that partition? I tried Carbon Copy, and it loaded in from my external HD to a previous partition but when I opened it up many documents had a "RED X," saying something about permissions. So that is when I deleted the first partition.
Now, I want to start over, and have two bootable versions, Lion and Snow Leopard. Can someone tell me the right way to do this?
Thanks,
DaisyMay
DaisyMay

Thanks Pondini,
I read #14 and your helpful hints. I am afraid to erase and reformat the drive because I am not as knowledgeable as others maybe. I have a website, and I don't want too loose all of my work and photos if I make a mistake.
I installed the Snow Leopard disk that came with my iMac i5 (2010), I first created a partition labeled "Snow Leopard." Started up the computer and saw the install icon. I selected the partition and followed the instructions, when that was done, I selected in Utilities, to back up from time machine on my external Seagate HD. When it was done, I noticed on the desk top two Macintosh HD, but changed back the name of my Snow Leopard 10.6.8. When I start up from the Snow Leopard HD, I see in the dock my older apps with the icon circle showing that I can't use them, like when I start up from Lion.
On the backup version on my external HD, I selected a date in March for the time machine backup. When I open up my external drive and select the apps it says, "Can't open up apps because it is in a time machine backup. Before installing Lion last week I backed up Snow Leopard in time machine and turn it off before installing Lion.
How can I get my old apps to work, it seems that time machine won't allow me to open up my older apps. The only reason that I am going to all of this trouble is that some older apps like File Maker Pro, Nvu, Motion Pictures HD, Switch, and a few others have some data that I want to see before I decided to trash the folders and just use Lion.
Any suggestions?
DaisyMay

How to reinstall mac app store in mac os x snow leopard 10.6

recently i have updated in mac os x version 10.6.7, but unfortunately mac app store deleted from the application. can somebody inform me how to reinstall the mac app store.

Run the Mac OS X 10.6.7 combo updater.
(58693)

TS5202 Cannot connect to app store in mac os X snow leopard

PLEASE CAN ANYONE HELP . I WANT TO UPGRADE TO A MAVERICKS BUT I CAN'T because it's not connecting at all

Have you checked to see if your machine is capable of running Mavericks?
OS X Mavericks: System Requirements
The Apple figure of 2GB RAM required is only borderline. 4GB or more would be better.

How can I obtain the Pages app which I previously purchased from the App store for Snow Leopard? The only download now available is for Mountain Lion which my computer can't run. Thanks

How can I obtain the Pages app which I previously purchased from the App store for Snow Leopard? The only download now available is for Mountain Lion which my computer can't run. Thanks

Try Amazon but look for the iWork suite of software. It's only sold separately as Pages, Keynote, and Numbers from the App Store.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

Which version of Snow Leopard to buy for a clean, non-upgrade installation?

I have a MacBook Pro 13”3, Mid 2009, I am the second owner. The computer was originally bought with OS X Leopard and later upgraded to Snow Leopard.
The previous owner does not have any installation discs, so I have to start from scratch.
My question is, which version of Snow Leopard do I need to buy, so I will be able to legally make a clean, stand-alone, non-upgrade installation?
Here are two I found at sites of different Apple Retailers:
1. Mac Box Set (Including OS X Snow Leopard, iLife 09, iWork09) Single User Pack
2. Apple Mac OS X v10.6 Snow Leopard Operating System (Family Pack)
I have been told by a salesperson that the “Apple Mac OS X v10.6 Snow Leopard Operating System (Single User)” cannot be purchased in Europe anymore.
Thanks in advance for your help.

Thank you for your input.
I agree that the disks should have been included, but it is what it is, sadly.
I've been looking for the retail version of Snow Leopard, but can't seem to find it. Amazon UK, for example, lists it as unavailable:
http://www.amazon.co.uk/MAC-10-6-3-SNOW-LEOPARD-RETAIL/dp/B003HAFZQO/ref=sr_1_11 ?s=software&ie=UTF8&qid=1314374218&sr=1-11
If I buy the Family Pack, which is still available at some European stores, will I be OK, license-wise?
It is still much cheaper than the full Mac Box Set.
http://www.amazon.co.uk/195540-Leopard-Operating-System-Family/dp/B003D1LROQ/ref =sr_1_2?s=software&ie=UTF8&qid=1314374218&sr=1-2

Why not have a section in app store for iOS 4.3 and earlier?

I LOVE "remote" app and airport.
Since i have had to restore all my ipods for various reasons, i am now no longer able to download the remote app since apple only supports iOS 5 or later. They have instantly rendered my whole apple setup useless. They are basically telling me that my purchase of their hardware was a mistake and that they only care about people who purchase new things. Which is a great reason not to purchase new things from them.
What i don't understand is why they simply can't put a version of remote (or any app) in the app store for iOS 4.2.1. and earlier? And allow developpers to support their apps for earlier iOS. So little effort to leave 4.2.1 apps in the store. They could even create a special section based on iOS.
Now they are forcing me to consider alternative solutions, of which there are many. I simply would never have bothered to do this before since i was so satisfied with apple products. This is a failure from a business and marketing perspective.

Backing up your current apps helps prevent this loss in the future. Earlier iOS apps are becoming increasingly difficult to find. You may want to look at VintApps, new in the Apple app store, that makes this much easier.
https://www.facebook.com/VintApps313
Although there are thousands of available apps to choose from, they will definitively not be the latest greatest.
I wrote my 99 cent app specifically to help solve this kind of problem. I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I purchased a free app from app store for iPhone 5 and it will not download; just gives me the little cloud with arrow pointing down. I have version 7.1.2 What do I do?

I purchased a free app from App Store for my iPhone 5s, iOS version 7.1.2. It will not download; just gives me the little cloud with arrow pointing down. What do I need to do to get the app to load?

Hello mjhardy,
After reading your post, it sounds like you are experiencing an error while downloading apps. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

Mavericks upgrade : Macbook (early 2009) running Snow Leopard (10.6.8)

Hello,
I have a Macbook (early 2009) running Snow Leopard (10.6.8) and want to upgrade to Mavericks.
I have upgraded to 4GB RAM and replaced the HD for an SSD. It works perfectly.
Now the issue comes with Mavericks upgrade.
The App Store offers me to upgrade to Mavericks but when I click on the Upgrade button, a message prompts it can not install Mavericks on this machine.
I am confused. Any idea on what I should check ?

Toffe13,
Are you very sure of the exact mode (year etc), just saying as the requirements are:
"MacBook (Late 2008 Aluminum, or Early 2009 or newer)"
If so...
Then have you tried reinstalling the 10.6.8 updates (combo 1.1) - http://support.apple.com/downloads/#10.6.8
Also...
I assume you've ran a full sweep of Disk Utility to clear any permissions issues etc. (rarely helps, but still)
Maybe provide a little more info on what you've tried thus far, I.E. is this a fresh install from your DVD's etc. or a migration from HDD to SSD etc.
Thanks

Are Different Versions of Snow Leopard specific to different Macs?

I've seen on eBay new copies of Snow Leopard that says they will only install on certain Macs, with wording like "These discs will work only with the correct computer listed above." And in the photos of the disks you can sometimes see them labeled with the name of a Mac type, such as an iMac. Yet when I go to the Apple Store to buy Snow Leopard there aren't different versions for different computers. Will any version of Snow Leopard install on an Intel-based Mac? If so, can it then be updated with the latest verion? I have an early 2008 model 4,1 MacBook Pro.

Apple when they include the hardware specific DVD with Mac, never sold them in the stores. All they sold is the generic one that worked on all Mac.
It is only on eBay that you see the gray DVD which are hardware specific for sales.
I tend to avoid purchasing from eBay because so many of the seller don't know what they are doing so they are now able to give you the correct data.
Allan

Macbook pro6,2 unable to connect to app store for software update

Purchased a used macbook pro6,2. When I ask the macbook to update software, the can't connect on app store page comes up. I can connect to iTunes.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Installation Options for iMovie HD on Snow Leopard system with iLife '09

Greetings and thank-you for contributing suggestions on what is a well worn subject. I have read many of the posts existing on this topic and am trying to nip some details.
I have a late 2006 iMac that came with Tiger and iMovie HD which is now at version 6.0.3. When I upgraded to Snow Leopard (Boxed Set) I got iLife 09 but, as it was supposed to do, it left me iMovie HD which is what I have used. I have both sets of installation DVD's. (from the iMac and the SL upgrade)
Today I got a new MacMini and am plotting how to get iMovie HD on it.
I gather that I first need to remove iMovie 09 from the Mini. I do that by dragging its application bundle in finder to the trash and removing any receipt packages.
Do I have to remove all of the iLife 09 applications or just iMovie 09?
Then, I reinstall either all of iLife 06 from the iMac DVD or just iMovie HD. After that I can load iLife 09 from the SL DVD. That will leave the iMovie HD on the system but upgrade everything else.
Should I run software update from iMovie HD to try to get the 6.0.3 version or download and run the upgrade image? Does it matter?
I am good to go. Did I miss anything?
I also have a SuperDuper clone of the iMac system. Another possibility is to boot from that and clone it to the new Mini. Does anyone think this is a better idea?
Thanks again for the insights of your experience.

I think the issue is that if you install iMovie 06 on a system with iMovie 09 installed, iMovie 6 has no knowledge that iMovie 09 exists. Therefore iMovie 6 installs itself in the iMovie folder in the Applications Folder and assumes anything in there is old and can be trashed.
Apple fixed this with iMovie 6.04, but this is no longer available.
But if you install iMovie 6 first, and iMovie 9 second, iMovie 9 knows about iMovie 6 and will move it to a folder called "iMovie - Previous Versions".
In your case, I would uninstall iMovie 09 as you started to do, then run the migration assistant, then reinstall iMovie 09.
It should also work to create a folder on your old system called "iMovie - Previous Versions". Drag the iMovie 6 app into this folder and verify that it works. Then do the Migration Assistant. This should work, but I hesitate to recommend it because I have not tested it. Best case, it installs and you did not even have to uninstall iMovie 09. Worst case, delete the iMovie folder and reinstall iMovie 09.
For what its worth, I recently did a Migration Assistant from a SuperDuper clone (after a failed hard disk) that had both iMovie 09 and iMovie 6 installed, and it worked fine. But I have not tried your scenario.
I would use Migration Assistant because then you have the correct version of Snow Leopard for your system. You may not if you use a clone. A new machine may have microcode that is not released to the general release of OSX for several months. If your Mini is a used one and at least 6 months old, a clone should work OK.

Is it possible to re-download the app store for my macbook pro?

is it possible to re-download the app store for my macbook pro?

If it has been deleted, installing the latest combo update should restore it.
Install new MAS app -
OS X Mountain Lion 10.8.2 update combo
http://support.apple.com/kb/DL1581
OS X Lion 10.7.5 update combo
http://support.apple.com/kb/DL1583
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399

App Store for earlier versions of Snow Leopard?

Similar Messages

Maybe you are looking for