App Store - How does licensing and transferring work?
I've just purchased and downloaded Aperture from the Mac App Store and it appears to have installed correctly but I have no notification of a licence number, no dmg file and no information about whether I can load it on other computers that I own. Is this a one computer licence or what? and what happens if I lose the program or have a disk crash or change to another machine?
There is no license as the apps are already pre-registered for ownership via the MAS. There is no disc image. The applications are simply fully installed on your computer as if you installed from a disc image.
If you select MAS Help from its Help menu, open the section "Purchase applications" then select "Use applications on multiple Macs." The information should answer the question.
Similar Messages
-
Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID. -
How does mix and match works in ECC6.0?
How does mix and match works in ECC 6.0?
Can some shared on this topic?
Thanks in advanceIt;s a term used in Retail for combination of sales item eg buy 3 get 1 any other @ xx price.
-
The following question is based on what I have seen in some early reports of the Developer version of Mountain Lion.
Since the Developer Release of Mountain Lion, and the final version also I expect, having all updates being installed via the App Store by the user, how is a administrator to keep hundreds of systems current with all updates? The App Store requires, at least in its current version, a user to log in with their Apple Account ID and password even to do no cost updates. In an Enterprise operation I expect a number, maybe the majority of users will just not bother to do the updates.
Is there some way to use ARD to handle keeping Mountain Lion systems fully updated from an ARD Admin system? Is there a backdoor for updating systems?No one is going to be able to discuss how ARD might work with Mountain Lion since anyone running an ML system is under nondisclosure and cannot discuss it publicly. All anyone here can talk about is how ARD can (or cannot, as the case may be) be used to keep Lion systems updated.
At this point I don't see any easy option in ARD to run Mac App Store updates, but it might be possible to script that, though whether that could run in background, as OS updates can, or on a system without a user logged in I don't know. Someone else here may be able to offer insight. For enterprise-level management I think most people have more-or-less given up on ARD as their primary tool, though, and moved to one of the third-party solutions.
Regards. -
How does QoS and Queueing work?
Hello,
I am new to QoS/Networking and I have a few questions so I hope you can help me.
1. ToS is older than DiffServ so how does the router know that the bits are set by DiffServ and not ToS?
2. Why should I use L3 prioritization instead of L2? If I have Switches on the way from the frame I have to use L2 priorization right?
3. Do I need L2 and L3 priorization if I use Router and Switches or is the Router able to interpret the 802.1p CoS Tags, too?
4. I don't understand the way how Cisco Switches are queueing traffic. I read about some specification like "1P4Q4T". I know it's about priority- and standart queues and bandwith thresholds but how does they work?
4.1 How do you define the bandwith thresholds? What does 4 thresholds mean?
4.2 How are the Queues used if I don't use QoS?
4.3 How are the queues used if I prioritize 1 VLAN?
I watched a few tutorials and read a lot in the world wide web but I haven't found the answers, yet. I hope you can help me.
Best Regards,
VeitDid nobody have an answer for those questions?
-
How does decode and case works?
Hi,
I want to know how decode and case works? How they process the arguements. Please explain me with some examples.
Thanks,
Sarav
Edited by: 943941 on Jul 3, 2012 1:42 AMwelcome
check this link
https://forums.oracle.com/forums/ann.jspa?annID=1535
you will find everything you need
DECODE compares expr to each search value one by one. If expr is equal to a search, then Oracle Database returns the corresponding result. If no match is found, then Oracle returns default. If default is omitted, then Oracle returns null.
This example decodes the value warehouse_id. If warehouse_id is 1, then the function returns 'Southlake'; if warehouse_id is 2, then it returns 'San Francisco'; and so forth. If warehouse_id is not 1, 2, 3, or 4, then the function returns 'Non domestic'.
SELECT product_id,
DECODE (warehouse_id, 1, 'Southlake',
2, 'San Francisco',
3, 'New Jersey',
4, 'Seattle',
'Non domestic')
"Location of inventory" FROM inventories
WHERE product_id < 1775;Edited by: user 007 on Jul 3, 2012 2:40 PM -
How does "SoftReference" and "WeakReference" work?
Hello, everybody!
I want to design a cache with "SoftReference"
the cache is just like:
int length = 1024;
Object[] cacheObjects = new Object[length+1];
cacheObjects[value.hashCode() & length] = new SoftReference(value);I hope the "value" and soft reference are cleared by gc at some time before throwing "OutOfMemoryError" if there is no directly reference to the "value" object.
So I wrote a simple test:
private static void softCache() {
int i = 400000;
List<String> list = new ArrayList<String>(i + 1);
String a = "...."; // a huge string;
while (i-- > 0) {
list.add(a + i);
Reference<Object> ref = new SoftReference<Object>(110);
try {
long[] b = new long[20000000];
System.out.println(b[0]);
} catch (Exception e) {
} finally {
System.out.println(ref.get());
System.out.println("OK");
}The test result is:
the ref and the 110 object are not cleared before throw "OutOfMemoryError".
Why?Well, for a start the result of boxing 110 is a
reference to a static Integer object - Integer has
predefined instances for numbers up to 128, I
believe. So there's a strong reference to it, and it
can't be cleared. The ref variable won't be cleared,
because it's a strong reference to a WeekReference
object.Yes, you are right. If I change 110 to 1000. it was cleared.
Thanks.
Your has table stuff is wrong (you need to use %
length not & length, and allow for synonyms, i.e.
different objects with the same hashCode), might as
well stick to HashMap. You need a seperate key anyway
to find the appropriate object in a cache.why '% length', not '& length'?
It 's allowed to cover by the object with same hashCode.
here the cache is for huge number object(may more than 10,000, 000).
It's more important to save space and improve speed if match probability > 90%. not nedd to find the appropriate object for each key.
You should also use a cleanup thread. Create a
reference queue and attach the SoftReferences to it,
then a cleanup thread deletes the entries from the
hashtable when their references are cleared. The
requires extending the SoftReference class to add the
key information needed to find and clear the hash
table entry.yes. thank your advice. -
Hello.
I'm building an application that based on JCo 3 and iDoc libraries 3 will be used to execute BAPIs remotely and also send iDocs.
I'm wondering if it will be a valid scenario to use the same TID in to make multiple calls and if this whole set of calls will be consider to be part of the same transaction. For example:
JCoFunction function1 = ...;
JCoFunction function2 = ...;
IDocDocument idoc1 = ...;
try {
String tid = destination.createTID();
function1.execute(destination, tid);
JCoIDoc.send(idoc1, ..., destination, tid);
function2.execute(destination, tid);
destination.confirmTID(tid);
} catch(Exception ex) {
Is this something that makes sense? Or should createTID and confirmTID be called for each execute/send? If this is valid, what will happen if executing function2 fails? Is there any way to notify that the tid was not finished or is not valid?
Thank you very much.Did nobody have an answer for those questions?
-
My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?
The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod. -
The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.I'll back up Csound on the MacKeeper thing. In fact, I actually wrote the following about it:
http://www.reedcorner.net/news.php/?p=245
Remove is ASAP. Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it. Try this:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple. However you have gotten it, your best bet is removing it. See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
http://www.reedcorner.net/guides/macvirus
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.) -
App Store says, "Tuner! and 4 other apps could not be downloaded at this time. Please try again later."
How may I appease the Store? The message first appeared a couple of weeks ago and seems to reappear every time I download something from the App Store, be it an update or a new app. I tried re-downloading and re-deleting "Tuner!" (this is the only one whose name I can see), but to no avail. I even tried hiding a whole load of apps from my Purchased list (including Tuner!) in the hope that the five offenders would GO AWAY and stop waiting around being nuisances ;) I haven't noticed them slowing down/stopping my other downloads, so I never paid the pop-up notice much attention, but it is starting to bug me now.
Thank you if you can help.I have been getting the message from time to time over the last couple of weeks. I just click through, and the download haooens anyway. The other day I looged onto my accout in apple.com, and it simply wanted me to verify the ccv on the credit card.
I am glas your solution worked, but I am not sure you needed to do a full wipe and reinstall. There is some goofy stuff going on with the store, but nothing you can't get by. -
How does "notify me" actually work in mail app
Might be a daft question, but how does "notify me" actually work in iPhone email app?
I get the principal but surely when you get a reply thats already noticed you?
Could someone advise me how it actually notifies and is it in addition to receiving the reply to the mail?I have the columns in place. But I have a few questions -
1. Iis there some kind of audit trail report on the updates to my record to the table? If so how do I get to see?
2. Am I expected to create a <entity name>_HISTORY table for this to work? I see some such recommendation here . -
WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
The App store crashing is a known problem.
IOS 6 App store crash: Apple Support Communities -
I recently changed my apple id and both my iphone 3Gs and Ipad 2 when synced went straight back to my old id name for my app store how do I change it to the new one and keep it that way?
Try going into your account details on iTunes, change your info there, then sync your devices.
-
I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????
There is only one thing that happens -- the Server does not respond.
Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.
Maybe you are looking for
-
Response not coming back to ESB when calling BPEL process
Hi, I am doing some demo, the actual process is, in ESB, I am reading a file and passing thsoe fiel contents to BPEL as SOAP service. In BPEL proecess, I processed the message and sending the response back to the ESB. When I deployed and check the pr
-
I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The star
-
Programmatically creating a page with portlets in it
Hello! I need a little help figuring out how to programmatically create a page and add a couple portlets to it. I have figured out how to create the PageDefinition and that code works great. How can I add 2 portlets (the portlet definitions already e
-
Ibook won't boot completely ! (stops at a blue screen)
Hi...first time poster here, please be kind. Also, I'm not brilliant by any measure when it to computers. Yesterday I was installing updates (now, my ibook was out of use for at least 8 months, so I was bit back logged on updates) and after the secon
-
How do I create a pop up window in Muse? Looks like Adobe either took away the Chat option for their Help site, or they are not working during the weekend. The window would have a banner and/or a video link from Vimeo. Thanks, /Fred