App Store says 8 updates. When I select App Store the button says 8 updates but screen is white (blank)

App Store says I need 9 updates but the screen is blank (white)

Fix: At least for me. I tried everything suggested and no luck. I then used four fingers and swiped up to reveal the icon bar or whatever you call it. I then long pressed on any of the icons until the negative sign shows up and I then pressed the negative sign on each and every icon until there were none left. I then pushed the physical button so I was on the main screen again and tried the app store again and selected the updates tab. They then all finally loaded. Click like if this works for you.

Similar Messages

  • My wifi on my ipod touch wont even turn. when i go to slide the button to turn on it wont let me slide it....it says there is no wifi.

    my wifi on my ipod touch wont even turn. when i go to slide the button to turn on it wont let me slide it....it says there is no wifi.

    See here:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    However, frequently it is due to a hardware problem an an appointment at the Genius Bar of an Aplpe store is required.

  • My Apple TV 1st gen will now no longer play any of our iTunes music, although it shows a speaker symbol when you select play on the track. Please help?

    My Apple TV 1st gen will now no longer play any of our iTunes music, although it shows a speaker symbol when you select play on the track. Please help?

    Are you streaming or syncing you music? Sounds like you're streaming music directly from iTunes.
    There can be many different issues. First, try power-cycling you wireless router (leave router disconnected for about 1 or 2 minutes) to refresh the wireless communication betweek both devices.
    Make sure all software updates have been installed, for Apple TV and iTunes.

  • When iam selecting row of the table i got the exception

    Hi ,
    When iam selecting row in the table at that time iam getting below exceptions
    <21/02/2013 1:31:35 PM EST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /InventoryPropertiesViewTF/InventoryPropertiesView URI: /com/avocent/trellis/apps/mainUi/inventory/pages/fragments/InventoryPropertiesView.jsff actual-URI: /com/avocent/trellis/apps/mainUi/inventory/pages/fragments/InventoryPropertiesView.jsff.
    javax.el.PropertyNotFoundException: Target Unreachable, 'BracketSuffix' returned null
    <21/02/2013 1:31:35 PM EST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /PropertyDisplayTF/PropertyDisplay URI: /com/avocent/trellis/apps/coreapps/ui/fragments/PropertyDisplay.jsff actual-URI: /com/avocent/trellis/apps/coreapps/ui/fragments/PropertyDisplay.jsff.
    javax.el.PropertyNotFoundException: Target Unreachable, 'BracketSuffix' returned null
         at com.sun.el.parser.AstValue.getTarget(Unknown Source)
    Please Let me know why its getting this type exception only some time interemitten issue,
    Please provide me any solution for these,
    jdeveloper 1.1.1.4

    Check your page code for an EL that uses 'BracketSuffix'. This is the point of error as the 'BracketSuffix' can't be evaluated at the given point.
    Timo

  • When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move them in groups to a folder?

    When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move these in groups to a folder or folders?

    The easiest way to move bookmarks around is in the Bookmarks Organizer, which at some point was renamed the Library. To open it, you can choose Bookmarks > Show All Bookmarks or press Ctrl+Shift+b.
    (Please note that the sort order of the Library dialog doesn't actually carry over to the menu. To sort the menu alphabetically, it's easiest to open the Bookmarks Sidebar, right-click the words Bookmarks Menu and choose Sort by Name.)

  • Hi, I have the iPhone 4, 32GB, version 4.3.5 (8L1) and for some reason when I connect it to the laptop, it starts synchronising but never goes beyond step 1. I have tried evrything, but it does not work and now I cannot update the iPhone s/w. any clue?

    Hi, I have the iPhone 4, 32GB, version 4.3.5 (8L1) and for some reason when I connect it to the laptop, it starts synchronising but never goes beyond step 1. It goes on syncing forever, without actually doing anything. I have tried everything, wiped the phone numerous times, deleted all files from the laptop but still no resolution. As a result, the phone does not really synchronise.
    This started somewhere in May 2011 when I upgraded what proved to be a problematic s/w version and the phone has not recovered since.
    Now I cannot update the iPhone s/w any longer.
    Any clue?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • How an INDEX of a Table got selected when a SELECT query hits the Database

    Hi All,
    How an Index got selected when a SELECT query hits the Database Table.
    My SELECT query is as ahown below.
        SELECT ebeln ebelp matnr FROM ekpo
                       APPENDING TABLE i_ebeln
                       FOR ALL ENTRIES IN i_mara_01
                       WHERE werks = p_werks      AND
                             matnr = i_mara_01-matnr AND
                             bstyp EQ 'F'         AND
                             loekz IN (' ' , 'S') AND
                             elikz = ' '          AND
                             ebeln IN s_ebeln     AND
                             pstyp IN ('0' , '3') AND
                             knttp = ' '          AND
                             ko_prctr IN r_prctr  AND
                             retpo = ''.
    The fields in the INDEX of the Table EKPO should be in the same sequence as in the WHERE clasuse?
    Regards,
    Viji

    Hi,
    You minimize the size of the result set by using the WHERE and HAVING clauses. To increase the efficiency of these clauses, you should formulate them to fit with the database table indexes.
    Database Indexes
    Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
    The primary index is always created automatically in the R/3 System. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE. If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVING clause, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
    reference : help.sap.com
    thanx.

  • When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

    When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

    You need the CreatePDF forum

  • Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
    Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

  • If in my Hardware section of System Information, when I select Thunderbolt and the reply is:    Thunderbolt: No hardware was found,  does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached?

    If in my Hardware section of System Information, when I select Thunderbolt and the reply is:
      Thunderbolt: No hardware was found,
    does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached and that the computer does have thunderbolt?
    I have Lion and both my Mini Server and Macbook Pro are less than a year old, however both were bought from Apple as reconditioned units so they might be older, and I expected they would have Thunderbolt but when I connect a Black Magic Intensity Extreme unit which is a thunderbolt powered and driven Device using a Thunderbolt Cable to either computer, it is not recognized.

    No other information in Sys Info and I guess as both units, Mini and MBPro, were reconditioned, they were pre July and February , 2011, respectively. 
    I don't suppose there is any way to add Thunderbolt or USB 3.0 to prior generation Mac Products or get similar performance.

  • When I select Brush, changing the exposure changes the whole image exposure

    When I select Brush, changing the exposure supposed to change only the selected part exposure.
    In my LR-5 it changes the whole image exposure.  What am I doing wrong?

    More than likely you have all the adjustment tool's sliders hidden, and you've thus moved the exposure slider from the Basic panel just below, which of course is a global adjustment. Check the dark arrow that I've highlighted in this screenshot, it's likely pointed left (everything hidden), so click on it and it will point down and all the adjustment brush sliders will be revealed.

  • HT201335 when i select apple tv the "mirror" option doesn't appear. how do i resolve this?

    when i select apple tv, the "mirror on" tab option doesn't appear below it. Ho can I resolve this? thanks.

    Nathan,  can you explain the issue in a little detail.  What device etc and ios would help.

  • The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

    The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

    haggyabeken,
    I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked to below.
    https://forums.adobe.com/thread/1595973
    So a switch to Mavericks with a reinstallation might be the way to solve it here and now.
    To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool.
    A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
    https://forums.adobe.com/thread/1587587

  • Help apple help me, at first I was new to iphone registration 1 apple ID account but because I hardly use icloud account. so I do not remember the password and login name, my computer crash when I decided to run the software on ios7.1, but do not expect m

    help apple help me, at first I was new to iphone registration 1 apple ID account but because I hardly use icloud account. so I do not remember the password and login name, my computer crash when I decided to run the software on ios7.1, but do not expect me to be locked iclou account, I hope this mail unlocked apple for my apple account. I'm currently using the machine iphone 5, IME: ********. thank you ... ask yourself? machine is in warranty period warranty icloud error not send mail to me at mail
    <Personal Information Edited by Host>

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I tried to buy the  WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

    I tried to buy the  WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    To see which iOS version is installed, tap Settings > General > About

Maybe you are looking for

  • In Safari Preferences, Safari is not listed as a Browser.

    Yesterday, Safari's icon disappeared from the dock after I started the program (it bounced and then the "applications" icon stood in as the substitute icon). When I click on the non-Safari icon, Safari starts up like normal and everything runs smooth

  • File name shows on the wallpaper picture

    After I installed Earth 3D screen saver, the images shown as my desktop background are now showing a large tag with the filename, path included, of the image. How do I get rid of that tag? I already got rid of the screensaver as someone suggested and

  • Difficulties replacing some BC functionality with XI (refer to example)

    <b>Difficulties replacing some BC functionality with XI (refer to example)</b> I am transferring all interface processing from BC to XI and am having difficulties replacing some of the current BC functionality.  Please refer to my example below <b>Cu

  • Sequence settings to 1920x1080

    I am using a Sony XDCAM-EX1 camera Full HD camera and am shooting in full 1920x1080p30 format instead of the normal HDV 1440x1080 format. But in FCP6, in Sequence setting, when choosing the Frame Size or Pixel Aspect ratio, I am not given the choice

  • What's status of my order?  We need more time to process your order.

    I cannot find on the Adobe site where to find the status of an order. Last Saturday I placed an online order for an annual subscription to the CC Photography package.  After I had completed all the steps a message was displayed on my browser that rea