App Tabs not being saved as it says they will

In help it says:
All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again.
Not true. I set about 10 App Tabs, close FF and when it came back NO App Tabs.

This is not my experience. On my Mac, the app tabs are automatically saved and are there every time I open Firefox, even though my settings are NOT "show my windows and tabs from last time." But on my PC, the app tabs are not saving at all.

Similar Messages

I am having a persistent problems with the application tabs i pin not being saved. sometimes, they are not present when i re-open the browser.

i have 3 sites i have repeatedly saved as an app tab. on the rare occasions i exit my browser, my pinned tabs are missing. furthermore, when i attempt to "restore previous session", the tabs that were open may be restored but the pinned tabs are ALWAYS missing and never restored.

''app-tabs not being saved...'''
Be sure you close Firefox properly File (or "Firefox") > Exit not with the "x" in the upper right corner.
Just because app-tabs will carry over from one session to another does not mean that they are fool proof or should be relied on., I keep mine in a bookmarks folder and replenish app-tabs from there when needed. It is also nice to have the "Tab Handler" to work with tabs and change all or a selection of tabs to app-tabs at once.

Flash CC crashes after publishing iOS app + publish settings are not being saved to file

I have two issues:
1. Flash CC crashes every time I publish an iOS app
2. My Publish Settings are not being saved
1. Flash CC crashes every time I publish an iOS app
Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
2. My Publish Settings are not being saved
Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
Thanks!

reset your preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Messages are not being saved on N96

On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

My outgoing messages are not being saved in my sent folder

Half of my message that I try to send are not being saved in my sent folder. This is a huge problem causing lost documentation and copies of information and conversations I have had. The error message I get says that thunderbird was unable to save to my sent folder and asks if I would like to try again. If I say yes I get the same message over and over again until I give up and let the message be lost to cyberspace. What can I do to fix this issue and stop loosing valuable information for work?
I am using an HP laptop running windows 8.

What protocol is your email account using (POP or IMAP)?
If POP, you need to make sure your local disk space is enough to save the sent messages. Check where the copies are located by looking at the account settings under '''Copies & Folders'''. When using POP, I believe a copy needs to be saved on both sides: local and server.
If IMAP, the email server is where such copies are saved. You can also double-check such settings as mentioned above.
Finally, if your emails are too big, this may be a restriction of your email provider, perhaps get in touch with their support and inquire about this to rule it out as the cause of the problem. Could you share more details about the kind of emails that fail to have a local copy saved or is it for each and every email?

Why are my bookmarks not being saved locally if the save to cloud feature is disabled?

Why are my bookmarks not being saved locally on my ipad mini if the save to cloud feature is disabled?

They should be. If you have lost bookmarks try restarting Safari:
1. Press the Home button
2. Double click the Home button to bring up the "Recent Apps" tray.
3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
4. Touch the "-" to terminate Safari.
5. Restart Safari and see if your Bookmarks are back.

Database/Password Information not being saved in CMC

Product: CR Server XI R2. Server is Windows Server 2003 operating system
An issue just popped up today where the database info for a report in the CMC is not being saved. I'm in the Process tab (database link) of the Report properties of the CMC and trying to enter Custom Database login information.
The Driver is Oracle and the Server and Username fields are set correctly. However, when setting the Password field, regardlesws of what length of a password I use, it defaults to 7 characters when showing on the screen and none of the reports run. Even when I set the password to blank and set the password on the InfoView, the reportsw still error out.
The error message when running the report is always
Error Message: The database logon information for this report is either incomplete or incorrect.
We've been running these reports for weeks without any issue until today. Are there any known issues with any recent MS patches or anything that could be causing this? The only thing I noticed was a MS Patch (KB960714) that was installed on Friday night. Uninstalled and rebooted and still no resolution.

Hi Eric,
I'm experiencing a similar problem. Did you ever get this problem solved?
Steve Teraji ~ 408-535-8339
Technical Manager: Capital Project Management System (CPMS)
Information Technology Dept.
City of San Jose
200 East Santa Clara Street, 5th Floor
San José, CA 95113-1905

WRT160Nv3 port forwarding settings not being saved

Hello there.
I am using a WRT160Nv3 router and am having trouble getting port forwarding to work.
Specifically, my settings are not being saved properly.
I am trying to set up a server to run for Minecraft, and I have eliminated all issues save port forwarding.
I open up the router's settings by going to 10.10.10.1 in my browser. I go to "Single Port Forwarding." I then choose a blank spot on the left and label the application (in this case, Minecraft), then I type in the ports I want to forward (minecraft uses 25565). I check the box "Enabled." Then I go down to the "Save Settings" button below and click it.
This brings me to a mostly black screen with a white box in it, and big black letters saying "Settings are successful" and a button to click, labeled "continue." I click this, and it returns me to the last page I was on (Single Port Forwarding).
But here is the problem- that page is EXACTLY the same as when I began. None of what I typed in or changed is actually saved on the screen o_0
This definitely baffles me, as it seems as if I did nothing in first place. I use the program whose port I wanted to forward and it still doesn't work, the error messages being the same as always.
So what is the matter here? Why aren't my settings being saved properly? Do I need to get a new router-this one is only a year old...
Any ideas?
PS- I also tried to do port range forwarding, and the same thing happens there too.

hi there and welcome to the forums!
try to clear your browsers' cache..and delete cookies then try again

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4075 I tried the steps mentioned above but the changes are not being saved.

I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand.

File Options not being saved

I appologize if this is the wrong forum, but I did a search and failed to find a related subject.
When I click on File>Options then modify them the way I want to, then close Designer 2008 and reopen it, they're back to the default values.
How can I retain my options even after closing designer and reopenning?
Thanks much!

What version of Crystal are you using?
Are you a local PC Administrator also?
Try right clicking on the crw32.exe and selecting Run As Administrator and then change them.
Are you clicking the OK or Save button after making changes or simply closing the window using top right X button?
Those options are saved to the registry, only reason they are not being saved is you don't have permission or some anti-virus software or Restore Point is writing the original settings back when you close CR.
You may want to check with your IT people to see if they have pushed out some sort our Profile update that doesn't allow you to keep changes to the registry.
After making the changes and you create a new report do you see the changes? Don't close the designer.
Thank you
Don
Edited by: Don Williams on Apr 6, 2011 12:52 PM

Table extension not being saved

Hi,
I have implemented Table extension at item level for SC and from the config perspective all looks fine.
1) Created Append struture with required fields
First step: appending the field to the correct structure in SE11 or via transaction SPRO.
Structure names for table extensions are according to the pattern:
INCL_EEW_PD_<x>_CST_<y> with
<x>: HEADER, ITEM
2)
Path in IMG (transaction SPRO):
SAP SRM -> SRM server ->
-> Cross-Application Basic Settings
-> Extensions and Field Control (Personalization)
-> Create Table Extensions and Supply with Data
-> Define Customer Table Extensions on Item Level
Second step: you additionally need to append the new table extension field to the
corresponding INCL_EEW_PD_<x>_CST structure called u2018cross-documentu2019 structure. This can
also be done in IMG
You can explicitly enter the very same field(s) (name and type) into both append structures.
It is recommended, however, to first create another structure with the new field (in SE11) and
then include that other structure in both append structures
(menu path in SE11 screen: -> Edit -> Include -> Insert).
Default append structure names in this example are
ZAINCL_EEW_PD_ITEM_CST_SC and
ZAINCL_EEW_PD_ITEM_CST
when using the IMG path..
3)
Third step: Set visibility of the table extension.Create an entry with TICUS for item data (THCUS for header data).
Donu2019t miss to populate the Transaction Type field - you could save the table entry without it,
but it will not work!
4)
Fourth step: Configure Control of Fields of Table Extensions. Create an entry with TICUS for item data (THCUS for header data).Donu2019t miss to populate the Set Level field - you could save the table entry without it, but it will not work!
Fifth step: Configure Control of Actions
Sixth (final) step: SM30 - maintain view /SAPSRM/V_MDFSBC_DEFAULT
I have rechecked the config several times but could not find any reason for the data not to be saved.
When I add the data to the table structure and if click enter or check button the data disappears. The entries are not captured in BBP_PDICF table either. i can see the Z structure in se11 for BBP_PDICF.
I have checked doc_change badi for any issues but could not find the issue. Any idea as where I should check for the data not being saved issue?

Hello Srinivas,
Please do this step:
In SM30-maintain view /SAPSRM/V_MDFSBC_DEFAULT
Object set type :TICUS
Structure field name : custom field
Object type : BUS2121
set level : item
Field visible : X
field enable : X
Regards,
Neelima

Window preferences not being saved

Hi there -
Using InDesign CS4 on Windows XP. A few days ago a problem started happening - whenever I close InDesign, my preferences for which windows (Tools, Pages, Links, Character) I have open are not being saved. Takes me 3-4 minutes every time i open InDesign to put everything back the way it should be.
I've installed updates, no dice, and have deleted the preferences file as suggested by this thread:http://forums.adobe.com/thread/526990
Any other steps I can take?
thanks in advance,
Andrew

Those things are saved as part of the workspace. It sounds as if the current workspace file has become corrupt. Close ID, then go to your user profile and you'll find the workspaces folder under \Application Data\Adobe\InDesign\Version 6.0\<language>\Workspaces. Delete the "current" xml file for the workspace and restart ID. The workspace will be restored to the conditions set when it was saved, but hopefully will remember changes again when you close the program.

Notes are not being Saved

Recently upgraded to an iPhone 3G S from the first generation iPhone. Synced my phone and everything is fine, but when I use the Notes application the notes are not being saved. Anyone know of a way to fix this?

Ensure that the "sync notes" box is checked in iTunes. Also note that the notes syncing feature doesn't work very well yet.
If you have a note on both the phone and the computer, and you change/update the one on the phone, the next time you sync the computer version will over write the phone version.
coop

App Tabs not being saved as it says they will

Similar Messages

Maybe you are looking for