App update with application loader: bundle is invalid - CFBundleShortVersionString error

Hi,
A client of mine is trying to update their app. They created a new multi-issue viewer (using ver18).
When uploading this app with application loader they receive the following error:
"This bundle is invalid. The key CFBundleShortVersionString in the info.plist file must contain a higher version than that of the previously uploaded version".
(see screenshot)
When checking, the update app indeed had a lower version (iTunes) number than the one already on the app store. So I figured that was the issue, but when selecting a higher version and trying again the error still persists.
I couldn't really find anyone on the forum who previously had this issue.
Tips are always welcome
Thanks

Hi
I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
Marketing version in Viewer Builder = Bundle Version String Short or ?
That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

Similar Messages

  • Uploading App with Application Loader Issue

    Hi guys,
    I wrote several apps while the restrictions were enforced for "fun" and we have now finished it for release. I am being thwarted by one particular issue, different from anything on the net so far (as far as 9 hours of searching goes).
    When I go to use application loader to submit, i choose the .zip, it accepts, unzips validates codesign etc, then comes up with a
    "this bundle is invalid. Apple is not current;y accepting appliactions built with this version of the SDK."
    I have tried renewing all codesigning certificates, provisioning profiles etc, and nothing helps. Ive even tried changing the info.plist in the actual compiled binary to show that it has been compiled and built with a 4.0, 4.1 sdk. No luck.
    This issue stands for all 3 applications I have written.
    Any fixes/suggestions/ HELP???
    Thanks
    Scott

    Hi
    I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
    This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
    When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
    Marketing version in Viewer Builder = Bundle Version String Short or ?
    That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

  • Unable to deliver  iphone5  app with application loader

    i get an error itms 9000 when trying to deliver my app with application loader
    i understand that i miss icon 568h
    my air version is 3.8.0.440 and there is not possible way to download png file with size 568h
    please help

    Have you tried this against our latest AIR release?

  • When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

    When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

    Thank you, Vincent! It's still down for me, but at least I know someone had the same issue. Hoping it's going to work over here soon
    Best!

  • How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

  • App updates will not load

    App updates will not load. All apps needing updates are locked out showing they are "installing" but nothing is happening.

    Hold your finger on it until it wiggles then click the x on the top left.
    If that doesn't work log out of the iTunes & App stores, quit the App Store app (bouble tap home button and tap red circle) then hard reset as Xissaxbellax suggested.
    Log back in to store and redownload

  • Uploading AIR for IOS thru Application Loader I get the following error - The package does not contain an Info.plist.

    I'm publishing an .fla in AIR for IOS.
    I'm in CC 2014 so first I need to know which AIR should I publish in?
    newest is AIR 14.0.0.178 for IOS
    IOS deployment type is App Store
    publishes with no error.
    I see the following files included .swf and app.xml
    I convert the .ipa to a zip file
    Upload that thru the Application Loader I get the following error
    The package does not contain an Info.plist.
    Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
    I converted the .ipa to a .zip and the intoplist file is NOT THERE  how do I generate this?
    Any help here?

    Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
    I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
    Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
    I used my previous p12, app ID and distribution certificates all generated properly.
    The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
    I changed it to the right app ID and the very next time and after 10 attempts I got the same error  Digital Certificate is not valid
    SO I then downloaded AIR 16.0
    RE DID ALL MY CERTIFICATES AND P12'S
    went to publish and I STILL GET THE SAME MESSAGE   Digital Certificate is not valid

  • Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

    Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

    Sal Sabaj, Would ask you to follow the suggestions mentioned under the below article and check if that helps.
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    Let us know in case you still get that issue.
    Regards
    ~ Arpit Kapoor

  • Why when I connect to iTunes store for app updates it will not cone t keep getting error messagr

    Why when I connect to iTunes store for app updates it will not cone t keep getting error messagr

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Errors Updating App with Application Loader

    I have an app that I transfered in on itunes Connect and I am now trying to update it with a new version that I have created in Indesign.
    The App version was 1.1 and the next version i want is version 2.0
    Adobe have bumped up my app to version 2.0 for me so it shouldn't error when I try to udate it but I'm still getting errors when uploading the .zip file to the application loader. See screenshot...
    Is there something I should have done once adobe bumped up the version?
    I'm at a bit of a loss as to what to do next. Any Suggestions?

    Hi Neil,
    Well, I'm experiencing the same problem as everyone.
    We contacted gold support, and told us that it was a known issue and being investigated. The Bug number is 3632264. Any updates?
    So, I tried tweaking App Loader and App Builder for the "version mismatch" and I think I solved it. However, the only problems left are the one's below. What do I do next?
    Thanks!

  • Problem with Application Loader

    Hi,
    I'm trying to submit an iPhone application to iTunes using the Application Loader on a Mac Mini (OSX 10.5.8). After I enter my iTunes Connect login details I receive the following error response
    *There is a problem with you login information*
    Please click back and try again
    An error occurred talking to the iTunes Store
    The login details are correct, the device connects to the itunesconnect web site from Safari without issue.
    Is anybody else experiencing a similar issue? Anybody have any ideas on how I might resolve this issue. It's really frustrating as this is now the only way to get an App into iTunes and the error message is not exactly giving me a lot to go on.

    I got a message in an email saying I had the wrong binary code and therefore had to change it by downloading the application manager.
    This was the email they sent me?
    Some potential reasons that your binary is invalid: the binary icon doesn't meet our requirements, the payload directory is set at the wrong level in the .app wrapper, the bundle version has not been increased, and so on.
    You will receive an email detailing the reason for your invalid binary. To clear the error, log in to iTunes Connect, locate your app, and click Ready to Upload Binary to reset your app's status to Waiting For Upload. This will allow you to redeliver your corrected binary through Application Loader.
    Makes no sense to me either!

  • Error with Application Loader

    So I'm about to submit my app and I keep getting three errors in the Application Loader:
    1. /build/Debug-iphoneos/ .app is not a valid location for the app. It must be at the top of the archive
    2. Bundle identifier:
    ____.com.______.____ differs from the bundle identifier: com._____._______ and had it as the first one in info list but I changed it and it still gives me this problem...
    3. Application failed codesign verification. The signature was invalid or it was not signed with an Apple submission certificate.
    So this one I checked my distribution certificate to see if that was the problem and it said it couldn't find the certificate pair in my keychain so I deleted it and added it back on and it worked fine but it still gave me this error...
    Please help me!

    Hello, everyone
    I took advantage of the program www.apparchitect.com, after I made ​​it my new app, then I try to download the source file Payload.ipa using the Application Loader. Throws an error ERROR-9000, see screen shots. Please help me resolve this problem, thank you to those who will write step by step instructions on how to remedy this error. I am a novice developer.

  • Error using App Builder and Application Loader

    Hello,
    we created many App's with the App Builder before and after the release of v27 we tried to update a couple of App's. So we get into the App Builder, changed the version from v26 to v27 (didn't changed anything else!!!) and rebuild the App. Now we want to use the Application Loader to upload the App to iTunes Connect, but everytime we receive this message:
    "The binary being analyzed must be an executable: /var/folders/9x/.../..._v27_distribution-viewer.zip/viewer.app/viewer"
    We rebuild the app several times, updated the App Builder but nothing works. Does anyone has an idea?
    Regards
    Sven

    Was the app updated from previous version to v27 or was created as a brand new v27 app?
    Is this same error happening for any other apps you are trying to submit?
    What is the version of application loader you are using to upload the distribution-viewer.zip?
    The latest version of application loader should be on is 2.8. If you are not, then upgrade to the latest version and try again. You can download the latest version from https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa

  • Error communicating with iTunes store, with application loader

    Hello ..
    I have a program I would like to submit it in the app Store and reached the step to open the application loader? !
    I get this message to sorry
    Astchertkm only because I know you from experience you possess in this area
    Note Search Qooukl I did not find the solution
    Thank you 
    e

    Thank you for the answer to my question ..
    I discovered something that might be important .. !
    The application loader version 1.3, which possessed the modern version is 2.3.1!
    How do I get the latest version of the program?
    May be a solution to my problem which I consider this a serious problem!
    Thank you 

  • Insert OR Update with Data Loader?

    Hello,
    can i Insert OR Update at same time with Data Loader?
    How can i do this?
    Thanks.

    The GUI loader wizard does allow for this including automatically adding values to the PICKLIST fields.
    However, if you mean the command line bulk loader, the answer is no. And to compound the problem, the command line version will actually create duplicates for some of the objects. It appears that the "External Unique Id" is not really "unique" (as in constrained via unique index) for some of the objects. So be very careful when you prototype something with the GUI loader and then reuse the map on the command line version.
    You will find that some objects can work well with the command line loader (some objects will not).
    Works well (just a few examples):
    Account (assuming your NAME,LOCATION fields are unique).
    Financial Product
    Financial Account
    Financial Transaction
    Will definitely create duplicates via command line bulk loader:
    Contact
    Asset
    Also be aware that you might hear that during a go-live that Oracle will remove the 30k record limit on bulks loads (temporarily). I have not had any luck with Oracle Support making that change (2 clients specifically in the last 12 months).

Maybe you are looking for