App updates are not removed after installing in update screen of iPhone and iPad

Whenever there is an update for an app, the same is displayed in the update screen of the App Store in both iPhone and iPad. After downloading and installing the patch, the app is not removed from the update screen. In earlier iOS versions, the same gets removed and only the pending apps for update remain.
Questions:
Is this a bug?
Will this not increase the update screen list of patch updates over time?
Why are the updated patches not removed from the update screen?

This is not a bug.
The updated apps will start disappearing after about two weeks (on a first in first out basis)

Similar Messages

The app store is not working or loading on my Macbook Pro, iphone and ipad

The app store is not working or loading on my Macbook Pro, iphone and ipad
Today When I tried to open the app store on my ipad I found out that's the store is not working,,, It's giving me the loading screen like for ever without any error message. So I tried my Macbook and my iphone and it was the same,,,, I thought it was from the connection so I tried several different connections and It was the same.
Any Idea what is going on with the app store ?

The App Store app on your iPhone in your iPad is a different App Store than the app store app on your Mac. You use the same account for both app stores. So I would guess that the real issue is perhaps something to do with your Home Network. You might try rebooting your modem/router. Also, turn off any antiviral software, firewalls or apps such as Little Snitch.

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

LCRs in queue in source Database are not removed after propagation

Hello,
I am using Oracle 10g Enterprise Edition 10.2.0.3 databases with Linux in VMware virtual machines. Replication (master-slave) with Streams does it's job quite well, but LCRs in the source queue are not removed after propagation.
I think this is because the apply process cannot send the notification after applying LCRs. does anyone know if Oracle Streams use a different port (different from standard listener port 1521) for the notifications?
For some stupid reason I have to run my virtual machine with a NAT network, so I have to do port-forwarding for every single port the VM needs to use. Does anyone know any more ports than Listener (1521) and EnterpriseManager (1158) I need? Any other suggestions?
Thanks in advance,
Oliver Jelinski

Hello again,
When I wrote "notification" I wanted to write "acknowledgement". So again: does anyone know, how acknowledgements are sent by the apply process (which port)? And when I am right, they are sent to the propagation process, which gives another acknowledgement to the capture process. Does anyone know how this second acknowledgement ist sent?
Thanks again, looking forward to reading your comments,
Oliver Jelinski

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

All the Google toolbar buttons(other then print) are not visible after installing Firefox 4

Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

After setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What;'s going on?

after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

Podcasts not downloading after installing iTunes update

I just installed the new update, and now NONE of my podcast sources are downloading. I have tried rebooting, and got the same result. I have never before had all of my regular sources unavailable at the same time. Anyone else having this problem after installing the update on a Mac?

ME TOO. Now I want to know how I can DOWNgrade iTunes.
Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
G4 Mac OS X (10.4.9)

Photostream not working on desktop mac but works with iPhone and iPad is it a setting that is wrong?

My photos are not being updated through photostream on my mac computer, but are syncing on my iphone and ipad. Does anyone have any ideas as to what settings could be wrong?

What system are you running on your desktop Mac? Photo Stream requires a Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later. So if your profile is correct you'll need to download and apply the OS X Lion Update 10.7.5 (Client Combo) updater.
If you're not running 9.2.2 or later do the same for iPhoto, download and apply the updater required to get you to 9.2.2 or later.
OT

TS3899 I am not able to excess my email on my iphone and ipad.

I kept changing the email password in the Accounts Yahoo!. However, it doesn't seems to change at all.
My iphone and ipad doesn't seems to be able to excess to my yahoo email.
It just prompt out - the user name or passwork for "apple.imap.mail.yahoo.com" is incorrect.
I tried switching the iphone and ipad off and on it back. But it just doesn't seems to work.
Can anything else be done to it. Is there anything to do with the IOS I am using. The ipad IOS was up to date.
I have been tyring for the past 3 days. Please assist.
Patrick Tham
+65 9062 6621hp
iphone 4 IOS 4.3

Hi syncdifferent,
If you are having calendar syncing issues between your iPhone and your Mac, you may find the following articles helpful:
OS X: Resetting Sync Services
http://support.apple.com/kb/TS1627
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
Regards,
- Brenden

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

Exchange replication service not starting after installing Rollup update 3 v3

Hi,
I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
Event ID 4999:
Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
ErrorReportingEnabled: True
Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
Event ID 2060:
The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
Check the event logs to determine the cause.
Thanks
in Advance!!

I hope you are following the best practice to install rollup on DAG.
Suspend activation for the databases on the server being updated.
Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
Install the update rollup.
Resume activation for the databases on the updated server.
Perform database switchovers as needed.
http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
Thanks Uday Kiran,
Senior Consultant
Cyquent Technology Consultants, Dubai
Please Mark as answer if it helps you

XMII content area not opening after Netweaver patch update.

Hi all,
Recently we upgrade Netweaver patches [few] from 7.3 SP7 to 7.3 SP9, after the patch update XMII is not show main content area, Header and links in the left panel are displayed but the main content area is blank.
Error Trace:
#2.0 #2014 07 14 13:32:16:540#+0300#Error#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#
##sap.com/xapps~xmii~ear#C0000A365209024C00000001000031D8#111421450000000004#sap.com/xapps~xmii~ear#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#96221#353##1FCB79F10B4211E4BC70000006A4280A#f37849690b4111e4afb7000006a4280a#f37849690b4111e4afb7000006a4280a#0#Thread[HTTP Worker [@2100786422],5,Dedicated_Application_Thread]#Plain##
Error transfering attributes org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. #
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.AuthorizationChecker#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000017000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.AuthorizationChecker#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User 96221 does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000019000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User <USER_ID>does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:079#+0300#Error#com.sap.tc.webdynpro.model.ejb.model#
#BC-JAS-EJB#tc~cm~ejb~api#C0000A365209024D0000001B000031D8#111421450000000004#sap.com/xapps~mpm~ui#com.sap.tc.webdynpro.model.ejb.model#96221#353##1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
execute
Component and version:
Component
Version
ADSSAP
1000.7.30.0.0.20101020230400
AJAX-RUNTIME
1000.7.30.9.19.20140618151600
BASETABLES
1000.7.30.9.1.20140217143400
BI-WDALV
1000.7.30.7.2.20120925175200
CFG_ZA
1000.7.30.7.1.20120710234700
CFG_ZA_CE
1000.7.30.7.0.20120312160300
CORE-TOOLS
1000.7.30.9.15.20140609162300
DI_CBS
1000.7.30.9.0.20130217111100
DI_CLIENTS
1000.7.30.7.2.20120808174400
DI_CMS
1000.7.30.9.0.20130217111100
DI_DTR
1000.7.30.9.1.20130429184500
ENGFACADE
1000.7.30.9.3.20130731225200
ENGINEAPI
1000.7.30.9.13.20140514195200
EP-BASIS-API
1000.7.30.9.3.20131203022700
ESI-UI
1000.7.30.7.1.20120419061400
ESP_FRAMEWORK
1000.7.30.7.3.20121022202400
ESREG-BASIC
1000.7.30.7.2.20130915212500
ESREG-SERVICES
1000.7.30.7.0.20120312224700
FRAMEWORK
1000.7.30.9.6.20140312211900
FRAMEWORK-EXT
1000.7.30.9.11.20140510042200
J2EE-APPS
1000.7.30.9.8.20140513152200
J2EE-FRMW
1000.7.30.9.20.20140702194800
JSPM
1000.7.30.7.1.20131029203300
LM-CORE
1000.7.30.9.10.20140702194800
LM-CTS
1000.7.30.7.5.20121018185000
LM-CTS-UI
1000.7.30.7.0.20120312160500
LM-MODEL-BASE
1000.7.30.7.0.20120312170300
LM-MODEL-NW
1000.7.30.7.0.20120312170300
LM-SLD
1000.7.30.7.3.20130822180000
LMCFG
1000.7.30.7.7.20130211235800
LMCTC
1000.7.30.7.5.20120823193700
LMNWABASICAPPS
1000.7.30.9.7.20140528172400
LMNWABASICCOMP
1000.7.30.7.1.20120501171100
LMNWABASICMBEAN
1000.7.30.7.2.20130509173200
LMNWACDP
1000.7.30.7.0.20120312170300
LMNWATOOLS
1000.7.30.7.0.20120313005500
LMNWAUIFRMRK
1000.7.30.7.3.20131028182100
MESSAGING
1000.7.30.9.31.20140616191000
MII_ADMIN
1000.14.0.4.2.20140310045511
ODATA-CXF-EXT
1000.7.30.8.3.20130619172700
OEE_MII
1000.1.0.2.0.20140110094411
SAP-XI3RDPARTY
1000.7.30.0.0.20101021060500
SAPMECORE
1000.6.1.4.14.201405091456
SAPMECTC
1000.6.1.4.2.20140513105149
SAPMEINT
1000.6.1.4.9.20140513105113
SAPMEINTCTC
1000.6.1.4.2.20140411083601
SAPMELEGACY
1000.6.1.4.14.201405091456
SAP_BUILDT
1000.7.30.9.0.20130217101400
SECURITY-EXT
1000.7.30.7.5.20121008182800
SERVERCORE
1000.7.30.9.31.20140702194800
SOAMONBASIC
1000.7.30.9.1.20130626201800
SR-UI
1000.7.30.7.0.20120313005400
UDDI
1000.7.30.7.0.20120312224700
UISAPUI5_JAVA
1000.7.30.9.19.20140130141100
UMEADMIN
1000.7.30.7.7.20130515172000
WD-ADOBE
1000.7.30.7.0.20120312164400
WD-APPS
1000.7.30.9.0.20130217123000
WD-RUNTIME
1000.7.30.9.22.20140609172000
WD-RUNTIME-EXT
1000.7.30.9.0.20130217123000
WSRM
1000.7.30.9.0.20130217140200
XMII
1000.14.0.4.3.20140314030733
Are we missing patch updates?
Has anyone faced this issue, any help would be highly appreciated.
Thanks,

Please see SAP Note 2040655 for this fix.
Regards, Steve

Blank discs not recognized after installing security update

Just installed the latest security update and now the computer will not recognize either blank CDs or DVDs. The first time I popped one into my external burner, I got the notice that I'd inserted a blank DVD and was asked if I'd like to open it in the finder (even though I had already set this as the default option). Then when I said yes, I got an error message that the disk could not be read. Ever since, I no longer get the notice, just the error message. Moreover, "drutil eject tray" will not eject the disk.
Same thing happens with the internal drive. Again, drutil did not work and I had to restart to eject the disk.
Disk Utility shows the disk but will not allow me to format it.
These disks were working fine until I installed the security update.
Anybody have any ideas?
Thanks.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwards, reboot.

App updates are not removed after installing in update screen of iPhone and iPad

Similar Messages

Maybe you are looking for