App upgrade problems with new iPhone4

I installed my apps from the ones banked in iTunes. I have 8 that need to be updated. I touch "Update All" and I get prompted through 3 screens of confirming my payment information and password and such, then it looks like the update starts, then the loop begins again. The same happens when I try to update them individually. I tried it on wifi and 3g and same result. Tried giving it the old Microsoft reboot and same. Not a crippling problem, but a surprising oversight and very annoying. I also have the antenna problem, in case anyone is tallying still.

Antenna problems are so last week: Buy a case.
I've had one or two apps that would no upgrade that way. Shake your head and move on.
Phil

Similar Messages

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • Problems with your iphone4 battery life? READ HERE!!!!

    I will make this short and simple as I too have been experiencing battery problems with my iphone4 since I upgraded to 4.0.1
    Now here is what I THINK is going on, I believe there is a BUG in the wifi software in IOS that tends to drain the battery at a rate of 5% every 10 to 15 minutes or so if you are using the phone for surfing. And if you are not doing any internet surfing at all, it still drops the battery at a similar rate.
    Sadly what I have found out is that this doesn't stop even when the phone is on standby. Two hours of my phone just sitting there, I lose about 5% plus. So if I leave wifi on and go to bed, my phone will lose close to 25% of battery over night. However once wifi is OFF, the phone will only lose about 2 to 3% over night. I'll say that's a HUGE difference.
    What I also have noticed is that it doesn't matter if I have notifications & push ON or OFF, the battery still gets drained at the same rate as long as wifi is ON.
    Once I have realized the culprit, I went from getting a mere 4 to 5 hours of usage to 8 to 9 hours.
    So, I suggest that you all only turn wifi on when you NEED it. Once you no longer need it, just shut it off. This is what we have to do until apple fix this problem because it seems like having wifi ON is constantly working the wifi antenna even when the user is not using the wifi connection at all. Apple claims a whopping "up to 10 hours" of internet surfing over wifi. How can that be when my phone will lose over 30% of battery in 10 hours just on standby with wifi ON?
    By the way, all my tests were done with my phone on EDGE only.
    If you have done this and it worked for you, drop a line here

    Note that the battery drain can be of many features you are using in idle or in use. Whether you notice it or not, it'll drain every 10 to 15 minutes on idle based on the several features enabled:
    * Push Notifications with 10, 15, 20 apps that run it
    * WiFi, cellular, 3G
    * Bluetooth active or idle
    * Mail set to Push or Fetch by Minutes
    * Applications left to run in the background
    Nearly every iOS4 app will add the Fast App Switch, File Transfer Services, and Background Location. If you are not using any of these apps, it's recommended to close them down. Whether it's iOS3 or iOS4 apps, they will slowly drain the power through the RAM processor.
    If you run a system info application, it'll state how much RAM you are currently occupying with all your multitask apps running. The more RAM used, the more battery power is drained. You can increase battery life by doing the following:
    * Settings-Push Notifications-Turn off any application's push that doesn't work anyways or is bothersome to receive. Setting Notifications to OFF in general will repeat a consistent popup to enable it again.
    * Settings-Mail-Push-OFF, Fetch-Hourly, Advanced-Schedule to Fetch
    * Close all running applications not in use that sends notifications later. They are running in the background draining resources.
    * Follow Apple's guidelines on improving battery life such as setting brightness to mid range and automatic or turning off unused features.

  • I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

    Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

    The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
    It happened suddenly and seemed to get better after a day or two but then went completely after another day.
    I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
    We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

  • Facebook problems with new macbook pro.

    Facebook problems with new macbook pro. I can't publish photo albums to timeline. I can't share items onto timeline. Photos I'm tagged in don't appear on my timeline. Any help?

    Yes! Been living in a hellish nightmare since Sept-Oct. Unlike you, however, Apple has been of no help. They say the iPad is unhackable, plist and crash reports are none of my business and who understands them anyway, their route tracing apps are probably not reliable. The best they could do was wipe the iPad clean. Lost photos they said would be in the cloud....
    Almost immediately was back in somebody's VPN, their remote controller, video, audio, working. Got the purple buddy for the first time today. I have been invaded, my iPad no longer feels like my own, I have lost thanksgiving, Christmas, new year trying to track down the invaders, signed up for a Cisco course, set/reset passwords.
    I don't know who else to contact... Or what next to do.
    I've read similar frustration in other posts, scattered around the support communities. Yours is the only one that has worked toward a solution.
    How did you get anyone at apple to look at your logs and acknowledge there is a problem?
    Would be happy for a suggestion on how to proceed. Already been the apple store genius and tech on phone route.

  • Problems with new catalyst

    I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
    This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
    With cat 4.6 and the drivers before everything works fine.
    I tried fastwrites on/off(no good)
    Disable Vpu recover(no good)
    Raise agp voltage to 1.6V(no good)
    I also tried asus own driver but the same thing happens.
    However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
    I hope someone have an answer to my mysterious problem

    Quote
    Originally posted by Ycore
    This is my exact problem.  Computer has been running ROCK solid for the last few months with 4.7 catalysts.  I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated.  Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings).  At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
    At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d..  I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
    QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
    AMD 64 3200+
    K8T-NEO
    Antec 430W PSU
    ATI RADEON 9600 PRO AGP
    SB LIVE
    1GB CORSAIR C2 DDR (2x512)
    Lite-ON DVD/CD+RW
    Windows XP SP2
    I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
    Also note that we have very similar setup's so try it and let us know if that works out for you.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • I have problem with my iphone4

    I have problem with my iphone4 I take it for servis and they told me its firmware problem and I have make restor. What can I do?

    Start by restoring it... as they instructed you to do.

  • I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Maybe you are looking for

  • Oracle report function error..........

    Dear i am using oracle report 6i and database 10g. my function is below--- function CF_ITEMFormula return VARCHAR2 is v_item varchar2(30); V_1 VARCHAR2(20); begin           SELECT      DISTINCT B.ITEM_CODE,(SELECT WE.WIP_ENTITY_NAME FROM APPS.WIP_ENT

  • External display recognised, but no image

    I have attached my MBP to an external monitor. Yosemite does recognise that there is an external monitor connected and it even knows it is a Samsung. But the screen stays black. The internal monitor screen keeps working just fine. In the display opti

  • SolMan 7.1: Unavailable data in system monitoring

    Hello experts, I have successfully configured system monitoring for our systems. Unfortunately there is only data available for some checks and not for all. Information is available for: - Technical system (Overall availability, Overall performance,

  • Rowset.setAttributeInfo lost

    version 3.2.3 build 1018 on Windows 2000 300+ MB I removed a column/attribute from one of my BC4J views. I forgot to remove the InfoSwing textcontrol that used that column (separate project in same WS as BC4J module). After rebuild of everything, and

  • Permissions issues in UPK

    I am having an issue with my admin account or accounts in the admin group. I connect to the library OK but the administration option is grayed out. Has anybody seen this before...any suggestions or hints to fix it ? Thanks KG