App upload: ERROR ITMS-9000

Hello world -
I'm attempting to upload a DPS app to iTunes; it was built in Adobe App Builder. Upon upload, I'm getting the following error:
ERROR ITMS-9000: "Invalid Code Signing Entitlements. The signature for your app bundle contains entitlement values that are not supported. For the 'com.apple.developer.ubiquity-container-identifiers' entitlement, the values in the array must start with the prefix provided by Apple in the provisioning profile, followed by characters that are uppercase or lowercase Roman letters [A-Z, a-z], the digits 0 through 9, dot ['.'], or hyphen ['-'], and not contain any wildcard characters. Specifically, value '7R584CUE64.*' for the key 'com.apple.developer.ubiquity-container-identifiers' in 'viewer.app/viewer' is not supported."
I actually get a variant of the same error, as well - just swap out the entitlement chain for "com.apple.developer.ubiquity-kvstore-identifier".
I can't find an asterisk on that value it's referencing anywhere. Can y'all lend a hand?
Thanks.

If anyone else has this same issue, try this fix. Just worked for me:
http://stackoverflow.com/questions/7656318/contains-entitlement-values-that-are-not-suppor ted

Similar Messages

ERROR ITMS-9000: Missing Code Signing Entitlements when adding app to Apple App Store

My client is getting the following error when sending my app (compiled in Flash Pro CC 2014 with AIR SDK 15.0.0.356) to the Apple app store:
ERROR ITMS-9000: "Missing Code Signing Entitlements. No entitlements found in bundle
'com.xxxxxx.xx.xxx' for excutable 'payload/xxxxx.app./xxxx'.""
He is saying that I need to send them the entitlements file.
I can't find out any information about this with regards to Adobe Air compiled iOS apps, apart from this old post:
Adding iOS entitlements to AIR apps
which states that 'the packager configures the entitlements file '
Can anyone explain what might be missing here?
Thanks,
Alan.

It looks as if this problem is solved by doing step 2 from here:
http://dev.mlsdigital.net/posts/how-to-resign-an-ios-app-from-external-developers/
It basically states that the client needs to produce the entitlements file and lists the following that the client will provide themselves:
A “Mobile Provisioning Profile”
An “Entitlements.plist”
An “iOS Distribution Certificate”
iReSign OS X app (or you could use command line)
Hope this helps someone. We've run into quite a few problems trying to get the Flash Air compiled App to both enterprise and Apple Store as it can't come from us (the developers) it has to be signed and delivered from the client.

Error ITMS-9000: No .app bundles found in the package

I created my app in Dreamweaver CC with PhoneGap Build 3 and Application Loader. When I used Application Loader to upload my app, I received an error that read, Error ITMS-9000: "No .app bundles found in the package". I spoke with Apple tech support and I was told that I needed to upload my Dreamweaver file into Xcode to produce a production Certificate so that my app can be uploaded to the App Store. How do I upload my Dreamweaver file to Xcode? Please help, thanks!

Some posts that could help you.
HTML5 Tools • View topic - No app bundles found in the package at SoftwareAssets/Softwa
Why am I getting error No .app bundles found in the package - Welcome to the GameSalad forum!
Thanks,
Preran

ERROR ITMS-9000 for AIR app

I am getting this error when compiling an IPA with Flash CC 2014, AIR version 15.0:
"ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleShortVersionString [1.0] in the Info.plist file must contain a higher version than that of the previously approved version [1.5]."
Funny; this is an upgrade to an existing app. The current version on the app store is 1.1. The version I am submitting to Apple is 2.0. So, I really can't understand what this error is about.
Any thoughts would be greatly appreciated!

for install on devices, you need to use a distribution cert. and a distribution provisioning profile for adhoc. When ready for AppStore you can use same distribution cert. but distribution provision profile for appstore. i completely use Windows PC for my entire process and use testflight to distribute to my testers. I'm not sure how the process is for simulator on the Mac is. I just the use mac to create my certs and profiles and then application loader.
When you tried upload to testflight did u use a distribution cert (p12) and an adhoc distibution provisioning profile. Also are the devices you are sending to are also registered to that profile.
Also ive been doing this for 3 years now but consider myself a newbie still cuz I'm self taught and still learning and my ways of doing things in an unorthodox way but on average I have about 10 uploads of updates or new apps to the AppStore a year and haven't had an app rejected. These forms will be your best resource of info with users like @colin.

ERROR ITMS-9000 "The bundle uses a bundle name or display name..." when uploading to iTunesConnect

I'm receiving the error "ERROR ITMS-9000 "The bundle uses a bundle name or display name associated with an Apple app." when uploading to iTunesConnect.
Version 1.0 or our app is currently on the App store, an I'm trying to upload a version 1.1.
I'm trying to change the name of the app from "Augsburg Now" to "Augsburg Gallery".
I changed the name in the App ID on developer.apple.com to "Augsburg Gallery, but left the ID as edu.augsburg.augsburgnow
I generated new Development and Distribution provisioning profiles, since the App ID name had changed.
In DPS App Builder, I changed the App name to "Gallery", and the Title (library view) in DPS App Builder to "Augsburg Gallery", and then created a new binary.
I changed the App Name in iTunes connect to "Augsburg Gallery"
I don't see the problem, since I left the bundle id, app id, etc. all unchanged.
Any ideas?

It sounds like you did everything right, Keith. I just did a similar thing recently to change my app name from "Digital Publishing Suite Tips" to "DPS Tips," so I know it's possible. In iTunes Connect, you submitted the app as a new version, not as a new app, right?
I would try building a new app and submitting it again.

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".
I need to change the build number, but not the version number. So I can upload a new build for same version to ITC. What step should I do in FB4.7?

Hi mobisa,
Can you try the solution in this post? ios - ERROR ITMS-9000: "Redundant Binary Upload. There already exists a binary upload with build version '1.0' for train…
Thanks,
Preran

ERROR ITMS-9000:"This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1

I submitted my IPA file to Itunes Connect using Application Loader and got the error message below. I have AIR SDK 13.0.0.111 and using Flash Builder 4.6.
Please help. Thank you in advance.
ERROR ITMS-9000: "This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and IOS 7 SDK. Do not submit apps built with beta software." ...

Hi!
I'm also using Air SDK 15 and I'm getting Invalid Bundle Error:
Adobe Air iOS Invalid Bundle
The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
Really need help
Michael

ITunes Producer ePub Upload Error ERROR ITMS-9000

This is the iTunes Producer ePub Upload Error:
ERROR ITMS-9000: "Unable to unzip input: null" at Book (MZItmspBookPackage)
How do I fix this?

Hi. Me too, I have the same problem. Did you solve it?
The epub is validate with epubcheck, it is also possible to read it with iPad, watching regularly the videos, but apple store doesn't approve it.
Is there anybody who can help?
Thanks

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

Error ITMS-9000: Invalid Segment Alignment

Hello everyone,
This is my first time submitting an app to the app store. I've done ad-hoc distribution before, but my client needs this app on close to a thousand of their iPads, and they have corporate offices everywhere, so B2B is the way I have to go.
Everything is built and tested and works fine. Certificates and Provisioning Profiles are all fine. I am at the last possible step and when I go to submit the .ipa file in Application Loader 3.0, I can't shake this message...
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have the proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
Here's the details...
The app was built in Adobe Flash CC 2014 using AIR for IOS 14.0. I used my PC for the actual building/publishing of the app and then transferred the .ipa file to my Macbook when I tested it and everything was finalized by the client. Application loader will not let me deliver the app to iTunes connect for submission. I keep getting this error.
I've tried everything I can think of. I've installed Flash CC on my Macbook and tried publishing again. All the Certificates and Provisioning Profiles were made and downloaded on the Macbook. I've tried submitting .ipas that were published in AIR for IOS 14.0 and 13.0. I've tried uninstalling xCode 6 and Application Loader 3 and using older versions. So far, nothing has worked.
Has this happened to anyone else? I'm really in a jam here. My client needs their app and I can't fix this last issue. It's very difficult because Adobe Customer Support says that the problem is Apple's Application Loader since the app works fine and distributes without problem ad-hoc. Apple Customer Support says they can't help either, since the app was built in a 3rd party software and not in xCode. If anyone can point me in the right direction, that would be amazing.
Thanks,
Lee

There's a huge issue with this on Adobe's developer forums.
This issue is happening to people everywhere, and it's only been happening for about 20 days or so. Before that Flash CC apps uploaded fine.
There is a successful workaround to the problem that a couple of guys came up with, but it's all terminal coding kind of stuff, and that's miles beyond my comprehension. That kind of coding is way past me, which is why I built it using Flash to begin with, because Action Script is simple. It would take me longer to figure out the work around that it did for me to build the app itself. lol
Any other ideas???

ERROR ITMS-9000: Invalid Bundle.

Hi,
I tried to upload my app to IOS store, but this message comes up each time 'ERROR ITMS-9000: Invalid Bundle.'
I used
- AIR 15.0.0.289 beta from adobe lab
- Xcode 6
- Application loader 3
- I built new certificate and provisioning
what should I do to solve this problem.

All,
If you are you looking to get the patched Windows AIR SDK and facing the download error (509), try this link: https://t.co/C5G23nMPnq
And what you have to do is copy the /lib/aot/bin/ld64 folder from that version to the same folder on your current AIR build. Doing that, and also adding <key>MinimumOSVersion</key> <string>6.0</string> to your <InfoAdditions> in your XML
Thanks to @oliver_joyce

Error ITMS-9000

Hey guys,
just tried to update an existing (non DPS-)App with a new version from DPS.
When i try to upload the package i'll get following message:
Apple's web service operation was not successful
Unable to authenticate the package: 735986870.itmsp
ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleVersion [3.4.5.8.92847] in the Info.plist file must contain a higher version than that of the previously uploaded version [14.9]." at SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage)
ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleShortVersionString [1.0.7] in the Info.plist file must contain a higher version than that of the previously uploaded version [14.9]." at SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage)
As you can see, the previous version was 14.9 and the new DPS-version should be 14.9.1.
I often read the answer, that i can ignore the ERROR-ITMS-9000 messages, but i can't upload the package ... so i can't ignore it.
Can someone help me?
Thanks a lot
Chris
//edit
Application Loader v2.9
DPS APP Builder v2.9.0
Mac OS X 10.9.2

Contact technical support. Someone from Adobe needs to manually change your version number in cases like this.

Error ITMS-9000: "the bundle identifier cannot be changed

Error ITMS-9000: "the bundle identifier cannot be changed
i finish to make app with adobe captivate 8.
i test app on phonegab build, it work well.
i need to upload to apple store but i get problem like it.
How i do?

This is because you created a new .mobileprovision file that has a different bundle id for your app in it, and then tried to upload it over an old application. Change the bundle id back and regenerate your .mobileprovision file, or upload with the new bundle id to a new application in iTunes.
Neil

App upload: ERROR ITMS-9000

Similar Messages

Maybe you are looking for