App-v 4.6 The system cannot find the path specified. Error code: 4625DD4-07D0082C-00000003

Below is our environment,
App-v 4.6 SP2 Client installed on Windows Server 2008 R2 and managed with SCCM 2012 R2.
This server is part of Terminal Server Farm which contains two members.
Only one user is getting the error when launching one application. It doesn't happen when he launches other applications
The system cannot find the path specified.
Error code: 4625DD4-07D0082C-00000003
corrupt cp file detected ('Q:\AppName\osguard.cp'). osguard cp file, NO CORRECTIVE ACTION TAKEN
I have renamed the Application's userdata in both roaming and local appdata.
I have researched quite a bit about this and haven't anything solid. Most of the discussions suggest to clear the .fsd file and let the whole app layer re installed.
I am hesitant to do that as this is happening for only one user and for particular app.

you can try to 'repair' the application: Ask the user to close all applications of that package, then use the App-V client MMC (sftcmc.msc) to locate the application entry. Right-click and 'repair'. This has to be done in the user's context/session
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Similar Messages

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

"system cannot find the path specified" error when deploying EAR

I am trying to deploy a J2EE based web service created in Sun Studio 5 to the SunOne AS 7.0.
I get an error saying "The system cannot find the path specified". I have followed the deployment instructions as closely as possible I think.
When I look in the file system for the file the system is trying to find, the whole directory it seems to be looking for (C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1)
is missing. (In fact there is nothing in the j2ee apps directory).
Got any ideas? Have I missed something?
Thanks for any help,
Nick
WARNING ( 1616):      ADM1022:Deployment failed - Detailed Message:
     com.iplanet.ias.deployment.backend.IASDeploymentException: Deployment Error -- com.iplanet.ias.util.zip.ZipFileException: filename: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class java.io.FileNotFoundException: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class (The system cannot find the path specified)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:58)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:745)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:667)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

I found out the problem;
the auto-generated file name seems to have been too long for the app-server.
I changes the name of the class to PCWS and it worked fine.
It's a shame Sun One Studio (which creates these massive file names doesn't warn you!

"The system cannot find the path specified" error

Hi, Thanks for taking the time and reading.
I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
i get an exception. I have tried a few different formats and it spews the same error.
Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
Things i have tried:
I installed: CRRuntime_64bit_13_0_13
I installed: CRforVS_13_0_13
Took a look at the Procmon and i could not find an access denied error
Event Viewer has no detail.
Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
Code:
if (!Directory.Exists(filePath))
Directory.CreateDirectory(filePath);
string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
Error message:
System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
    at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
    at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
    at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
System Details:
Windows 7 Enterprise N 64 bit
ServicePack 1
IDE:
Visual studio 2010 .Net framework 4
Application is set to run as "Any CPU"
CrystalReports :
dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
Thanks for your help

I don't see where you're ever setting the logons for the tables in the report and subreports. The reports with saved data are working because they already have data in them. The reports without saved data are not working because they don't know how to connect to the database.
See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
-Dell

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

"System cannot find the path specified" error message !HELP !

Hi
In doing a program to read a string from the buffer, I am getting an error message that says "cannot find the file specified"
The file was created in a previous program and I verified it does
exist at the specified location on my hard disk.
Below is the "ReadAString" program and "WriteAString" program where the String was created.
Thanks
Joe
import java.io.*;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
public class ReadAString
public static void main(String[] args)
File myFile = new File("C:Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407/charData.txt");
FileInputStream myInputFileInAStream = null;
try
myInputFileInAStream = new FileInputStream(myFile);
catch (FileNotFoundException e)
e.printStackTrace();
System.exit(1);
FileChannel myInputChannel = myInputFileInAStream.getChannel();
ByteBuffer myByteBuffer = ByteBuffer.allocate(48);
System.out.println("\nNew buffer: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
try
//size() will return the length of the file
System.out.println("\nFile contains " + myInputChannel.size() + " bytes");
//The FileChannel object keeps track of the file's current position
System.out.println(
"The file's current position before the read into the buffer is: " +
myInputChannel.position());
while (myInputChannel.read(myByteBuffer) != -1)
System.out.println("\nBuffer after read: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
System.out.println(
"The file's current position after it read into the buffer is: " +
myInputChannel.position());
System.out.println("\nString read: " +
( (ByteBuffer) (myByteBuffer.flip())).asCharBuffer().
toString());
System.out.println("Buffer after flip: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
// set the limit to capacity and the position to 0
myByteBuffer.clear(); //clear the buffer for the next read
} //end of while loop
System.out.println("\nEOF reached.");
myInputFileInAStream.close(); //close the file and the channel
catch (IOException e) {
e.printStackTrace(System.err);
System.exit(1);
System.exit(0);
import java.io.*;
import java.nio.*;
import java.nio.channels.FileChannel;
//This program takes a text phrase (in Unicode characters;(2 bytes each character)
//and puts it into a buffer via a CharBuffer,
//then loads the buffer contents into a file channel
//then outputs to a file.
//When you have successfully run the program, go to Start | Search |
//type in "charData.txt" and examine the contents of the file. OR
//go to the notepad and open
// C:
//Documents and Settings
//GateWay User
//jbproject
//ssd_ch10p407
//src
//ssd_ch10p407
//you should see charData so right click on it and choose "open with " "Notepad"
// and verify the contents are "Garbage in Garbage out"
// each time you run the program, "Garbage in Garbage out " should be concatenated.
public class WriteAString
public static void main(String[] args)
String phrase = new String("Garbage in Garbage out\n");
String dirname = "C:/Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407";
String filename = "charData.txt";
File dir = new File(dirname);
//now checkout the directory
if (!dir.exists()) {
if (!dir.mkdir()) { //.....create it
System.out.println("Cannot create directory: " + dirname);
System.exit(1);
else if (!dir.isDirectory()) {
System.err.println(dirname + " is not a directory");
System.exit(1);
//create the fielstream
File myFile = new File(dir, filename);
FileOutputStream myOutputFileInAStream = null; //place to store the stream reference
try
myOutputFileInAStream = new FileOutputStream(myFile, true);
System.out.println("File stream created successfully");
catch (FileNotFoundException e)
e.printStackTrace(System.err);
ByteBuffer myByteBuffer = ByteBuffer.allocate(1024); //ByteBuffer object created
CharBuffer myCharBuffer = myByteBuffer.asCharBuffer(); // create view buffer
//transfer the phrase to myByteBuffer via mycharBuffer
myCharBuffer.put(phrase);
//update myByteBuffer limit (position times 2 because each Unicode
// character takes 2 bytes) to store in the ByteBuffer
myByteBuffer.limit(2 * myCharBuffer.position());
System.out.println("myCharBuffer position is " + myCharBuffer.position());
//create the file output stream channel object
FileChannel myOutputChannel = myOutputFileInAStream.getChannel();
System.out.println("new buffer: position = " +
myByteBuffer.position() +
"\tLimit = " + myByteBuffer.limit() +
" \tcapacity = " + myByteBuffer.capacity());
//each time the program is run, the phrase is again loaded into the buffer.
// Run the program several times and open charData.txt to verify that the
//data went into the file.
//Load the data into the buffer
for (int i = 0; i < phrase.length(); i++)
myByteBuffer.putChar(phrase.charAt(i));
System.out.println("Buffer after loading : position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
myByteBuffer.flip(); //flip the buffer ready for file write
System.out.println("Buffer after flip: position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
//write this file
try
myOutputChannel.write(myByteBuffer); //write the buffer to the file channel
System.out.println("The file contains " + myOutputChannel.size() + " bytes" +
" Do you see this number double every time you run the program?");
//you should see 48 characters writen to the file each time (phrase has 24 characters)
myOutputFileInAStream.close(); //close the output stream and channel
System.out.println("Buffer contents written to file");
catch(IOException e)
e.printStackTrace(System.err);
System.exit(0);
//After running the program once my output was:
//File stream created successfully
//myCharBuffer position is 23
//new buffer: position = 0     Limit = 46      capacity = 1024
//Buffer after loading : position = 46     Limit = 46      capacity = 1024
//Buffer after flip: position = 0     Limit = 46      capacity = 1024
//The file contains 46 bytes //Do you see this number double every time you run the program?
//Buffer contents written to file

Right - File is smart. Otherwise, you'd have to build
platform-specific paths by hand, using file.seperator,
to keep your code multi-platform. Ew.
Grant
IC..
Aldaris84 bows his head in honour of the man/woman that created the clearly intelligate File class
:)

(Error) System cannot find the path specified

I am getting a error of "The system cannot find the path specified when I try to run windows server backup utility on windows 2008 standard
I have done a upgrade on one of my poweredge 2900 server from windows server 2008 standard to R2 Enterprise. Now I would like to push a backup from the 2008 standar to the enterprise and on the 2008 standard i am getting the error The system cannot find
the path specified when I run the backup utility. Please Help

Hi,
Before going further, what's the specific error code?
The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
Windows 7 backup "The system cannot find the path specified. error 0x80070003"
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Best regards,
Frank Shen

Acrobat startup error 3: Cannot find the path specified (citrix)

If a user logs in an error is generated: Error: 3 - The system cannot find the path specified. 'OK' has to be clicked, otherwise Adobe Acrobat and Distiller do not work.
The system is a Citrix environment. Not all terminal servers experience this problem.
Thank you in advance for your help.

Hi,
Before going further, what's the specific error code?
The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
Windows 7 backup "The system cannot find the path specified. error 0x80070003"
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Best regards,
Frank Shen

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

"system cannot find the file specified" when launching a java app

Hi,
we are receiving an error message saying "The system cannot find the file specified" when launching a java app on a server. Exactly the same configuration on another server does not give the same problem.
The dialog box with the error message only presents one button - OK - and after pressing the button the app continues to run normally. This however is a big problem for us as we are trying to convert the apps into system services using the wrapper (http://wrapper.tanukisoftware.org).
Note: the problem exibits itself with and without the use of the wrapper.
I am not very comfortable about reinstalling the JRE on a production server. Is there any way to see what file it is missing? Debug options or something similar?
The JRE in question is 1.4.2_06. Many thanks in advance for your answers.

if not setting Post-Processing option results in a cryptic error why doesn't Adobe do one of at least three things?
1. Don't let user click Export on Export dialog if nothing's selected for Post-Processing.
2. Default Post-Processing to Do Nothing
3. Give the user a hint as to what the problem is when the error occurs instead of issuing cryptic error message.
Allowing this error to persist for so long is ridiculous.

"The system cannot find the file specified." on BackgroundDownloader.getCurrentDownloadsAsync

The method
Windows.Networking.BackgroundTransfer.BackgroundDownloader.getCurrentDownloadsAsync()
will consistently error out for me.
To repro this:
Start a bunch of (preferably large) download operations using the BackgroundDownloader.
Wait for a couple to start.
Kill the app with Alt+F4.
Try to load the previously added downloads using the above method.
For me the method consistently fails and calls the error callback on the promise with the message "The system cannot find the file specified."
Seeing this happen in prod too and it is causing all kinds of havoc. The BackgroundDownloader does not continue to function at all, until the /AC/BackgroundTransferApi folder is removed from the app directory or the app is reinstalled.
Can anyone confirm this? Is there a solution?
Cheers,
Felix

Hi CensoredUser,
Thank you reporting this issue, I can reproduce it as you provided, but I think this is not the common status in
app life cycle. Can you tell me why you need do ALT+F4 action?
For a quick work around, reinstall app is an option to ignore this issue.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

ORA-20100 The system cannot find the file specified 0RA-06512

I can create and deploy a .NET stored procedure but when I run it either from Visual Studio 2005 Oracle Explorer or TOAD or SQLPlus I get the following:
ORA-20100: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_CLR", line 211
ORA-06512: at "PROD.GETSEGADDRNO", line 7
ORA-06512: at line 1
It is basically the same C# code as the OTN sample except for accessing a table in my database.
I found a forum thread dated 2006 with basically the same error message and it said the problem was fixed in Oracle Database patched to 10.2.0.2 but I can't find such a patch for 10g R2 Enterprise.
This is my first time setting up Server 2003, Oracle 10g and ODT for .NET
(I successfully created and deployed an external procedures for Oracle 8.1.7 on Windows 2000 a couple of years ago)
This is the code:
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;
// use the ODP.NET provider
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace CLRLibrary1
// Sample .NET stored function returning address number (ADDR_NO) for
// a given segment number (SEG_NO)
public class Class1
public static int GetSegAddrNo(int segno)
int addrno = 0;
// Check for context connection
OracleConnection conn = new OracleConnection();
if (OracleConnection.IsAvailable == true)
conn.ConnectionString = "context connection=true";
else
throw new InvalidOperationException("context connection" +
"not available");
conn.Open();
// Create and execute a command
OracleCommand cmd = conn.CreateCommand();
cmd.CommandText = "SELECT ADDR_NO FROM SEG WHERE SEG_NO = :1";
cmd.Parameters.Add(":1", OracleDbType.Int32, segno,
System.Data.ParameterDirection.Input);
OracleDataReader rdr = cmd.ExecuteReader();
if (rdr.Read())
addrno = rdr.GetInt32(0);
rdr.Close();
cmd.Dispose();
conn.Close();
return addrno;
} // GetSegAddrNo
} // Class1
} // CLRLibrary1
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
was installed from the Oracle downloads site: 10201_database_win32.zip
On Windows Server 2003 R2 Standard Edition SP2
Oracle .NET tools was installed using: ODTwithODAC1020221.exe
The CLR Service is running
Deployment says that it is successfull.
The DLL is in the expected Oraclehome\BIN\CLR folder
The deployment script is:
CREATE OR REPLACE LIBRARY "SYS"."ORATEST6_DLL" AS '$ORACLE_HOME\bin\clr\OraTest6.dll';
GRANT EXECUTE ON "SYS"."ORATEST6_DLL" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLR" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRTYPE" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRPARAMTABLE" TO PROD;
CREATE OR REPLACE FUNCTION PROD.GETSEGADDRNO wrapped
a000000
1f
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
8
147 138
ePHIr6kvu6nZ9gYrxgs40akg18owg1zQf/ZqZ3QC2vjqaIs25soMp1nBmBfBj1ZboVvNkdPT
8qhpuEVdmv4n2nlF5ynrhLsm3F0h9ZGrTQ4tGYIybWjMFxYNlDDeBOx1i7O0GviP8AxHys23
kW8aTVA2xV8IuLNlwP7KWFw70tGbg+lUIlRhYo5WmLW6N9wcjOCeLZK6W6s6tvd4zKAQykzc
sIsaneE0FWyV9Q1BD0yJpLoCfWH+f6fVXsne5Feyxu68k5geCJ8F5FCLm2ycvxIiKNKTIpiD
q4wshbsYLTTPHX3F6pA=
The parameter mapping is:
return value int32 number
segno int32 number
Bob Sorrell
[email protected]
863-662-5524

These are the Reference Properties for Oracle.DataAccess in the OraTest6 app:
Aliases: Global
Copy Local: False
Description: Oracle.DataAccess.dll
File Type: Assembly
Identity: Oracle.DataAccess
Path: c:\oracle\ora102\odp.net\bin\2.x\Oracle.DataAcess.dll
Resolved: True
Runtime Version: v2.0.50727
Specific Version: False
Strong Name: True
Version: 2.102.2.20
This is what GacUtil shows:
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Number of items = 2
The GAC seems to contain both 2.102.2.20 and 1.102.2.20
Do I need to remove one?

Load report Failed, COMExpection: System cannot find the path specified

Interesting problem:
I have an application that runs on a web server (currently running it as simple test application to make solving this easier). We use a BO XI report to load data from the DB via a stored proc, then run an ExportToStream to get CSV data to return to the caller.
It all works well as long as I run the application under the NT Account logged into the Box (W2k3, R2). But when using a different account (it's a domain admin account), it fails with the following error:
System.Exception: Load report Failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.ClienDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CyrstalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod).
The report is located on a file drive the openMethod is OpenReportByTempCopy. The Temp directory for the user (landes) exists on the box, all things seem to be in place.
Anybody know that path is specified and how to overcome this?
Thanks

Will it be possible to check this registry key: HKEY_LOCAL_MACINE\SOFTWARE\Suite 11or11.5\Report Application Server\InprocServer\LocalConnectionMgr and verify if the ConnectionDirectoryPath is set to something like C:\ ?
If not, set to C:\ and see how it goes after running your app.
Cheers
Alphonse

Java.io.FileNotFoundException: test.txt (The system cannot find the file sp

Hi All,
am getting the following error, help me out. Thanks in advance...
java.io.FileNotFoundException: test.txt (The system cannot find the file specified)
     java.io.FileInputStream.open(Native Method)
     java.io.FileInputStream.<init>(FileInputStream.java:106)
     java.io.FileInputStream.<init>(FileInputStream.java:66)
     BinaryStreamServlet.doGet(BinaryStreamServlet.java:13)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
I have placed "test.txt" in the path"D:\Backup\Tomcat web server\apache-tomcat-6.0.14\webapps\examples\WEB-INF\classes\test.txt".
web.xml entry is as follows,
<servlet>
<servlet-name>demoservlet2</servlet-name>
<servlet-class>BinaryStreamServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>demoservlet2</servlet-name>
<url-pattern>/demoservlet2</url-pattern>
</servlet-mapping>
Source code:
import java.io.*;
import java.net.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class BinaryStreamServlet extends HttpServlet{
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException{
response.setContentType("text/plain"); /* set the MIME type */
     File f= new File("test.txt");
     byte[] arBytes = new byte[(int) f.length()];
     FileInputStream is= new FileInputStream("test.txt");
     is.read(arBytes);
     OutputStream os = response.getOutputStream();
     os.write(arBytes);
     os.flush();
}

I have one Drivers.xml file in /WEB-INF that i want to read .but everytime i get exception file not found..
i m trying to read this xml file in DriverUtilties.java (a non servlet class)
inside of /WEB-INF/classess folder is there and hierarchy for non-servlet class DriverUtilties is :- com.dds.apps.ptes.pidentifier.admin.util.common.DriverUtilties
what code shall i write so that i can read the xml file. ???
where i set in classpath ?
MYCODE is like this :
public static final String DEFAULT_FILE = "/WEB-INF/drivers.xml";
InputStream in = new FileInputStream(DEFAULT_FILE);
Thanks in advance

App-v 4.6 The system cannot find the path specified. Error code: 4625DD4-07D0082C-00000003

Similar Messages

Maybe you are looking for