App-V 5.0 Connection Groups not syncing to Client

Hi,
i have installed an App-V Management Server and successfully created and published packages to a client.
I
then tried to create a Connection Group for some Internet Explorer
Plugins, which works on the server (adding packages, assigning to a
group, publishing), but fails to get synced on the client.
The client is listing all packages, but no connection groups.
App-V Management Server Version 5.0.1224.0
App-V Client 5.0 SP1 - 5.0.1104.0
I tried 5.0 SP2 Client before, but had the same problem...

If you assigned the packages and CG to a user, you can open a browser on the client machine (with that user) and connet to the Publishing Server URL. This should return above XML.
Note that changes on the Management Server by default take 10 minutes to get replicated to the Publishing Server - and then a sync-appvpublishingserver is required on the client to get the info down there.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Similar Messages

Address book app and Addresses pane in Mail not synced

Address book app and Addresses pane in Mail not synced
I add a contact to Address Book app eg [email protected], this address is not imediatley available to use in Apple Mail app.
The address [email protected] eventually appears in the Address panel in Maill app, it can take from 3 minutes to hours to appear, surely both apps are reading the same database.
This is particularly problematic when adding new contacts to groups and then emailing that group, Im never sure the group in Mail app is the same as the group in Address Book app.
Nothing seems to speed up this process ie quitting and re-opening Mail app or Address book app.
I have tried deletting "AddressBook-v22.abcddb" ~/Library/Aplication Suport/Address Book
I have tried forcing ~/Library/Aplication Suport/Address Book to re-index.
I have also restarted, repaired permissions, ran fsck -fy in single user mode.

Because the sender has their name as part of the email address that is sent, and when they send you a message that matches the one in your Address Book, it's updated to show their name as Mail received it. But if you had previously sent them email before that update occurred, then your Previous Recipients database in Mail doesn't use that newly updated information in Address Book.
Mulder

Contacts in "Groups" not syncing correctly on iPhone/iPad

I am using iCloud to keep my Address Book/Contacts synced between my Mac, iPad and iPhone. For the most part, the service works as advertised, i.e. editing, creating, deleting, etc. across all three devices.
However, although all of my 1000+ contacts can be found on all three devices, only Address Book on the Mac displays my contacts in the correct Group, or in any Group for that matter.
For example, my brother's contact card is in a group called "Family" on Address Book on my Mac. Although the group "Family" also appears on the Contacts app on both of my iOS devices, his contact card is not in the group "Family"! However, if I look through "All Contacts" on either iOS device, his contact card is there; it's just not in the "Family" group where it is supposed to be. The bug is not isolated to this single contact; I have dozens of contacts that are not appearing in any group on either iOS device, yet they appear in the correct group on Address Book on my Mac.
Any ideas how I can fix this bug? I guess I should be thankful that the contact is even there, but if I can't count on iCloud to keep my "Groups" correctly synced, it kind of defeats the purpose of "Groups"...
Bruno

I have a very similar issue across my 3 iCloud synced devices (Mac Pro, MacBook Pro and iPhone 3GS). The contacts themselves are mirrored beautifully across every device, but the groups are syncing erratically.
I have made quite a lot of changes to my groups this afternoon (bith adding/deleting groups and adding/deleting contacts). The changes I have made to the groups themselves show up fine across the three devices, but it is the contacts within them that are a little more ad-hoc! Quite a lot of them show up in the appropriate group on one device, but not on another.
Can anyone shed any light?
Dan

App-V Server : Changing Connection Group Name through powershell.

Hi,
Is it possible to change the name of existing Connection group through powershell ?
I've tried using Set-AppvServerConnectionGroup but i was unable to change the name of existing group.
Thanks,
Sumit.

Do this:
$group = Get-AppvServerConnectionGroup -Name "Connection Group A"
$group.name = "Connection Group B"
Set-AppvServerConnectionGroup $group
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

App-V 5.0 connection group odd behavior

I am having some odd behavior with an application that I've packaged in App-V 5.0. We are running App-V for RDS on Server 2012, and I'm on SP2.
The problem I'm having is with a program called SQL Tools 1.6 (a 3rd party tool, not from MS or Oracle). It's a fairly straightforward program, and it runs fine on App-V 4.6. But it requires an Oracle client to run. On App-V 4.6, we have
the Oracle client installed locally on the server. But with App-V 5, I wanted to make use of connection groups, so that we could use multiple Oracle versions, if necessary, and so that updating Oracle would be easier. So I have a connection group
that contains SQL Tools and the Oracle client.
What is happening is that when I try to launch SQL Tools, I get an error saying it can't find OCI.DLL (which is in the Oracle path). I took apart both packages, trying to make sure that the Oracle path variable was correct. I even added the Oracle
path to the SQL Tools package (I even tried hard-coding the local path to the Oracle package). I always get the same error. I also swapped the priority of the two packages, but it didn't help. Then I tried launching a command prompt in the
context of the SQL Tools package. When I checked the path variable, it was correct, and had the path to oci.dll. Out of curiosity, I tried running SQL Tools, and it launched no problem. Then I closed it and tried to launch it from the shortcut
on the desktop, and got the same error as before. I've tried launching it from various places (desktop shortcut, direct path to the executable, a command prompt without specifying the context of the SQL Tools package, etc.), checking compatibility mode
and setting it to various settings (XP SP3, Windows 7, Run as Administrator on and off, etc.), but nothing seems to work except opening a command prompt in the context of the SQL Tools package, and then running SQL Tools from there. As a workaround,
I created this short script that launches a command prompt in the context of the SQL Tools package, and then runs SQL Tools from that command prompt:
$p = Get-AppvClientPackage -Name "SQL Tools 1.6"
$cmd = '"C:\ProgramData\App-V\BB0D9EC0-3876-42EB-A5E9-92A149D52FB5\37F941F9-B4BA-425F-9FB4-9B699843E767\Root\VFS\ProgramFilesX86\SQLTools 1.6\SQLTools.exe"'
Start-AppvVirtualProcess -FilePath cmd.exe -ArgumentList "/k $cmd" -AppvClientObject $p
It works, but I would rather not have to use this type of workaround for something that should work natively.
Any help would be greatly appreciated.
Thanks,
Sam

Hello,
What happens if you launch CMD instead of your tool when starting an application, and from that CMD you start sqltools.exe
So the command to start the application would be;
cmd.exe /c sqltools.exe
Nicke Källén | The Knack| Twitter:
@Znackattack

What do I do about contacts and groups not synced from iPhone to iCloud?

I've been syncing my contacts with my Mac (Snow Leopard, not Lion) via iTunes for years now. It's worked well enough, but I don't sync with my Mac that often (typically weeks between syncs), so I've worried a little bit about losing data entered on my iPhone before it gets on my Mac.
Before: Mac <-iTunes contacts sync-> iPhone
A week or so ago I backed up contacts, calendars and my whole iPhone (and my Mac) then upgraded my iPhone to iOS 5. It took a while (hours) but seemed to work.
Then I set up iCloud contact syncing.
What I intended: Mac <-iTunes contacts sync-> iPhone <-iCloud contacts sync-> iCloud
After setting up iCloud contact sync, the trouble began.
I looked at my iPhone contacts and saw that instead of the half dozen groups they were organized into before, they were all in one iCloud group. I found I could make new groups and assign contacts to them on iCloud and they'd sync, but I'm not interested in redoing work organizing hundreds of contacts that iOS and iCloud lost for me.
Shortly I discovered that some contacts were just missing. Poof. Gone after the iCloud sync.
I've hesitated before syncing with my Mac again. I don't want to have the messed up groups and the deleted contacts propogate back to my Mac.
I've also hesitated because I don't see a way to disable iTunes contact syncing before actually plugging in my iPhone — the options for managing what gets synced only seem to appear when the iPhone is connected, and sync starts automatically.
Suggestions for how to proceed?
Thanks!

I found out how to disable automatic syncing:
In the device’s Summary pane, you can set iTunes to automatically sync your device when it’s attached to your computer. To temporarily override this setting, hold down Command and Option (Mac) or Shift and Control (PC) until you see your iPhone appear in the sidebar.
I'm still looking for suggestions about how to proceed to get contacts with groups synced.
Thanks again!

Apple TV 1 will not retain connection hence not syncing

Hi, have a first genersation ATV but it has decided not to keep a connection, in fact the only way to get a connection is to do a complete reset everytime, but via ethernet naturally it sync's fine, so could I use my airport express and connect the ATV via ethernet to it ? would that work ?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Mail.app with Exchange - all folders will not sync - is there a fix or is this a defect

I am tryinf to switch from Outlook to Mail - running Mavericks and new 7.0 mail app. Inbox appears to have synced but other folders within inbox are empty and have tried to rebuild several times. Thoughts? I do have a lot of messages.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Address book smart groups not syncing

I'm using a 3G iPhone, Macbook Pro and MobileMe. Everything is pretty much working ok, except my Address Book's smart groups don't sync to MobileMe.
My standard (non-smart) contact groups - the ones created with the + button on the bottom-left of Address Book - sync just fine, but smart groups don't. This is a real nuisance as I rely on smart groups to keep track of certain sets of contacts. Anybody got any ideas please?

Sorry to nudge, but anyone any thoughts on this?

I have downloaded apps onto iTunes, but the will not sync onto my iPod or even go onto my iPod. Help?/

Two apps I have dowloaded are in the 'apps' folder in iTunes, and I can't copy them onto my iPod or sync them onto it, because it doesn't work. HELP

Configuration?

Good App on Apple IPAD cannot not sync emails

Hello All,
Good App installed on Apple IPAD cannot not sync emails when connected to wireless network at the site.we are using cisco does it required any additional configuration on wlc to allow communication.please advice.
Thanks in Advance.

Per Good for Enterprise website -
"To use Good Mobile Messaging over WiFi in a corporate setting, the IT administrator must make sure the following port is open: UDP port 12000 TCP ports 80, 443, and 21
Good requires that customers open a range of IP addresses (Class C 216.136.156.64/27)"
We use Good on iPads and Android over our Cisco Wireless solution with no issues.
Hope this helps.
Pete

2 Apps will not sync due to error??

I just purchased a few apps and two of them will not sync to my touch. I am
getting a pop up box that says error OXE800002D and OXE8000013.
I haven't had this response before. Does anyone know how to get this to
work?
Thanks!

I've received that error myself with some random Apps (AIM and Instapaper).
Basically, after the problematic sync completed, I re-synced, and the apps installed without issue.
If you've tried that and it's unresolved, try downloading a fresh copy of the app. First, delete them from your iTunes library (choose the option to move them to your Recycle Bin). Then, head over to the App store and download the app again. (If you've paid for it, act as though you want to pay for it again, and provided you're signed in to iTunes with the same account you'd originally used to purchase the app, you'll be given the option to download it again for free).
Once you've got the new copy of it, see if you can sync the apps.
CG

ITunes does not sync properly anymore

When I try sync my iPhone 5 (iOS7.0.3) with iTunes 11.1.2.31 it syncs my apps and co. but actually does not sync my music.
The music I bought with iTunes is automatically downloaded on all my Apple devices. But when I add those ne songs to playlists on my PC and then connect my iPhone and start the sync, all steps are done, but in the music app, nothing changed. The playslists, to which I add the new songs, still remain same on the iPhone, as if I'd never changed anything...
Can anyone help me with my problem or does have the same problem?

So I've been looking for a solution for days. There has been so many problems for the past week.
- Some songs play counts going up by 6 plays each time I sync
- Songs not transferring from PC to phone
- Songs appearing on the phone with download icon
- When viewing 'What's on this phone' on itunes songs have the 'grey dotted circle of death' next to them
Now I've deleted an album I bought the other day from iTunes from my PC and it doesn't even appear in my transactions from the past few days, And when I view it in the store it says purchased but there is no option to download it again.
WHAT A MESS! Apple please fix this ASAP. There are numerous threads with issues that I have stated above and there is not ONE solution.

How can I set the movies I have put into itunes so that they do not sync each time I try to sync new music purchaes?

I can uncheck tv shows and when I sync music or app purchase the tv shows do not sync unless they are marked us unwatched. I have put digital copies of some blu-rays into itunes and I cannot get them to be in itunes without syncing when sync new purchases. How can I keep the movies in itunes for storage but keep them from going to the device and taking up memory when I am not needing them?

Just untick Sync Movies or change the drop down below to selected movies.
tt2

App-V 5 Connection Groups on Client

All,
I am having an issue with a specific connetion group. If my tech's remove the connection group and applications and do a sync from with powershell the connection group does not appear in the client console or in powershell. If I run a get-appvclientconnectiongroup
-all, i see that it is there but I get the following:
Name               : Intranet
IsEnabledToUser    : False
The connection group is deployed to users and not to the machine. I do see in the operational log that the connection group was successfully configured.
Virtual application connection group {guid} version {guid} was successfully configured
In the client-catalog debug, there is a Package {guid}, version {guid} was not found in the user Catalog.
Our current client is 5.0 SP1 HF 3, but I have also verified the same behavior happens with 5.0 SP2 HF 4 as well.
My enviroment:
Management/Publishing Server App-v 5.0 SP1 HF2
Brian

Thank you Ben but...
Thats where I run into issues with the connection group. If I remove the computer connection Group and packages using the commands above, the connection group(s) do not come back. If I get-appvconnectiongroup -all, I can see that App-V
does see the connention group, but does not enable it for the user.
Name               : Intranet
IsEnabledToUser    : False
Brian

App-V 5.0 Connection Groups not syncing to Client

Similar Messages

Maybe you are looking for