App-V 5.0 standalone, application executable not launching

Hi
I have sequenced Mozilla firefox using App-v 5.0 sequencer. When I publish the application in standalone mode the application and launch he shortcut the application does not launch. When i check the process i can see that the application process , in this
case 'firefox', has launched but the shortcut to the application does launch in GUI.
I did some test's on the issue and below are the results.
1) If I copy the Root file of my application and paste them some place on the desktop the executable starts to launch.
2) I opened up the bubble and saw that there is a small cross mark on the application executable, which means as per my knowledge that the application exe has not streamed , but I am using the client in standalone mode and not publishing the app from server
so the exe should not have a streaming issue.
3) I tried capturing the application in both VFS and MNT mode but it does not help.
Any suggestions what I can try or what could be the issue here.

if you are running in standalone mode... what is the source of your package. The cross means indeed that the package is not 100% mounted, so:
Add-AppvClientPackage packagae.appv | Publish-AppvClientPackage | Mount-AppvClientPackage
and try again.

Similar Messages

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

Now all CS4 applications will not launch

I have been working with cS4 for sometime now. I worked in dreamweaver last night and tried to open a file but it took forever so I tried to force quit it. Still it was not responding so I shut my computer down and waited for 30 minutes. I tried to open it again but after i click the icon it jumps on the dock for a few seconds and goes away. Now All my other CS4 applications will not launch either. I tried to delete preferences but nothing so I uninstalled it. I just installed a fresh CS4 copy but it still will not work/launch. Thank you. I am using mac OS 10.5 Leopard. Never had a problem with any CS4 before. All my other applications work well only Adobe CS4 will not
Please!!!!!! I really need your help guys!
Thanks

HI,
I'm having the same problem :-(
Did you get any help with this or find a solution?

Suddenly, my LR4 application will not launch on my Macbook Pro OS 10.7.5. It starts to launch, then gets stuck, wheels spinning, no progress. I have to force quit. What do I do?

Suddenly, my LR4 application will not launch on my Macbook Pro OS 10.7.5. It starts to launch, then gets stuck, wheels spinning, no progress. I have to force quit. What do I do?

Suddenly, my LR4 application will not launch on my Macbook Pro OS 10.7.5. It starts to launch, then gets stuck, wheels spinning, no progress. I have to force quit. What do I do?

Palm 4.2.1 application will not launch after re-install of software

After migrating my palm software from my old g4 to my new MacBook Pro OS 10.5.6 and having sync issues I was instructed from PALM to uninstall then repair permissions and re-install. I have done this and now the new PALM application will not launch. Can anyone help?

What SPECIFICALLY happens when you attempt to launch the Palm Desktop? What error message do you see as a result?

Updated on 20th Jan and now applications do not launch!!!! Help please...?

OK folks- I have been reliably informed that the update last week which included iTunes and QT updates is a bit of a stinker.
Sure enough- iTunes receipts confuse the Disk Utility and now I cannot verify unless I move the older ones out of the folder.
And a lot of my applications just plain refuse to launch. They bounce in the dock and then just do nothing. No message- no nothing!
Sadly I really really need to access JAlbums as a matter of serious urgency: I have a slide show to present in less than 12 hours and I still have to make it!
Reading through threads here I note that folk are warning to NOT update but hey- it is too late for me. And others are suggesting going back down a version of QT to correct this.
Can someone tell me how to downgrade the QT version or how to uninstall the recent upgrade without resorting to reformatting as I cannot get hold of my disks to do this until it is too late (UK time is now 22:30 and they are at work...)?
Please? I will love you forever.
Thanks to all who take the time to read this plea.

Well it DID fix the problem with JAlbum.
So note to all who come after me- QT is definately the problem if previously working applications will not launch.
Downgrade by reinstalling an earlier version as I did (and I have not yet bothered going back up to 7.0.3 which, I assume, I had before) and make life easier for yourself.
That is- if like me- you are on OS10.3.9!
Thanks all, over and out.

After upgrading to iTunes 11 application does not launch and is disrupting other programs

Hello!
I have trying to solve this problem all day:
After updating to iTunes 11 this morning, the application does not launch.
Furthermore, Windows Media Player, Win DVD8 and my Email Program fail to launch as well.
I have been through all support pages on iTunes, on support pages on the Windows 7 Forum, and I
read the answers given in the discussion.
I have tried and applied the solutions given, but none of them worked.
What happenes is iTunes tries to launch for a second, then stops, but the process keeps running
in the task manager.
All methods through MSCONFIG failed. Uninstalling and re-installing (in the correct order) iTunes, related
programs and QuickTime failed as well.
I am on a Windows 7 Home Premium 65 bit desktop computer.
Up until the update this morning everything was running fine.
Any suggestions are welcome.
Thank you very much in advance.

Solved it.
I had a program running in the background, which did not get picked up by MSCONFIG.
I looked at the services on CCCleaner and there they were, many instances of this program, slowing the
computer down and preventing other programs (including iTunes) from functioning.
Turned them all off, and iTunes and all other pgms work again.

NI-CAN Bus Monitor Application does not launch

I have just installed a PCI-CAN Series-2 Card. I tested the card installtion through MAX (by running the Self Test). The card passes the test. However, when I try to launch the Bus Monitor Application, there is no response. No error message is displayed, and the application does not launch.
Does anybody know why this would occur? Something that I am missing out during the installation?
Any help will be greatly appreciated.
Thanks.

Hello,
Generally to get the Bus Monitor Application open, all you have to do is right click on the CAN interface that you want to monitor (in MAX) and click on Bus Monitor. If this is what is failing for you, consider trying the following things:
-First, make sure that you have updated information about installed hardware in MAX by pressing the F5 key.
-Run NI-Spy to see if any CAN calls are being made to the NI-CAN Driver. See information about using NI-Spy here: http://zone.ni.com/devzone/conceptd.nsf/webmain/C31BC5FB34DBC0EF86256ADF007B8A47?opendocument
-What version and revision of the CAN driver is currently installed? You check this in Measurement and Automation by expanding the Software branch and clicking on NI-CAN.
-If you can watch your
processes as you try to start Bus Monitor, does a process named nican_bm.exe ever start?
-Additionally, try starting bus monitor from the command prompt by running C:\Program Files\National Instruments\NI-CAN\bin\nican_bm with parameter CAN0 so your command is (without quotes): "nican_bm CAN0".
-If you have a 2 port card, have you successfully been able to run Obj2Obj? I'm curious if your CAN interface is working properly at all. From the NI-CAN\utilities directory, run obj2obj.exe with a correctly terminated cable connecting both ports of your CAN card.
Let me know the results of this if you are still having problems.
Thanks,
Scott B.
Applications Engineer
National Instruments

BlackBerry App World 1.1 - "This application is not available..."

Model: Curve 8330
OS: 4.5.0.77
Carrier: Verizon
I was able to resolve my connection issue to App World 1.1, the issue I run into now is attempting to download applications. I get the follow message on any application I click on:
"This application is not available on your device or for your carrier"
Example: I clicked on the app Facebook (which I know works for the Curve 8330) and got the msg stating it is not available.
I tried troubleshooting the issue by uninstall/install the App World 1.1, but that did not resolve the issue.
Message Edited by lrdawg on 08-02-2009 12:06 AM
Solved!
Go to Solution.

lrdawg wrote:
Good news!
This morning I checked back with App World, some of the apps are now downloadable and not giving me the msg that "This application is not available...". I assume this is a server side issue.
Apps such as Viigo that was showing the msg yesterday is now giving me a download option. Facebook is still showing the msg though, I imagine it will correct itself in the next few days.
Thats great Irdawg!
If you get a chance could you let me know about the applications center question?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Applications will not launch

After installing the 10.4.8 update, I have noticed that applications that I had previously installed before the update will no longer run. New downloads will also not run. I can extract the files, but clicking to run an application does not do anything. Looking at the Console utility, it logs a "crash" for application I try to unsuccessfully run.
That said, applications that came installed with OS X are running fine (iPhoto, Safari, etc). My firefox web browser is also running fine. I have also managed to install a couple of other apps from the internet (Flickr Uploader for example), but by and large, any other applications will not run.
Any ideas?

From MacFixIt.com
Update prebinding Many cases of application launch-failure can be resolved easily by simply updating prebinding, via the following steps:
1. Log in as an administrator
2. Open the Terminal (located in Applications/Utilities)
3. Type: sudo update_prebinding -root / -force and press Return.
4. When prompted for a password, enter your admin password, and press Return again. The process may take a few minutes, and you may see various messages flash by. The process is complete when the Terminal returns to a normal prompt.
5. Type exit and press Return.
Kill process in activity monitor Killing an application-related process via Activity Monitor (click the item then press the 'Quit Process' button) can allow proper application launch. This is especially applicable in situations where a restart cures problems with application launching, as the offending process(es) will, of course, be killed by the restart process.
Launch Activity Monitor (located in Applications/Utilities), then find the process associated with the problematic application, then quit it and attempt re-launching the applications.
Delete appropriate .plist files A non-launching application can be the result of a corrupt or otherwise defunct associated .plist file
Most of the preferences files that we will be talking about are stored in a folder named Preferences, and located in the Library folder of your home directory, e.g.:
* ~/Library/Preferences/com.apple.Safari.plist.
Go to the ~/Library/Preferences folder, and search for any .plist files that may be associated with the application you are having trouble with. Drag the .plist file(s) [many applications have more than one associated .plist file, so be careful to scour for all of them] to the Desktop, then re-attempt launching the application.
You can also use an application like Preferential Treatment to check for corrupt .plist files.
Re-install the application Try re-installing your application from its original media or download source.
If an Apple application or component is not launching properly, you might need to restore it from the Apple installation discs per the instructions in our tutorial "Re-installing Apple applications from a Mac OS X disc/update package using Pacifist."
Clearing caches Try using a utility like Tiger Cache Cleaner, OnyX, or Cocktail to perform series of system cache deletion routines. Go from light, to medium to deep (the ordinal levels are defined differently in each application), checking to see if your afflicted application launches properly after each.
Also, check the following folder for application-specific cache files that can be deleted, or at least temporarily removed:
/Library/Application Support (look inside the folders here for files that end with .cache, and delete them)
Make sure permissions are correct A range of permissions issues can effect Mac OS X applications, causing them not to launch.
In these cases, the first thing to try is a disk permissions repair routine using Apple's Disk Utility (located in Applications/Utilities).
Failing that, startup from your Mac OS X installation disc (insert it, then restart while holding down the "C" key). After the startup process is complete, go to the "Utilities" menu and select Disk Utility. Click on the First Aid tab, then click on the Repair Disk button.
In some odd cases (usually after a backup or when transferring backed up data back to a startup device), permissions on the "MacOS" directory (the directory that normally stores the executable binary in a Mac OS X application) can become incorrect.
In order to fix this problem, use the following steps:
1. Click on the afflicted application to select it in the Finder
2. Either click the application while holding the control key, or use the "Action" menu (the icon looks like a gear) to access the option "Show Package Contents"
3. Open the "Contents" folder therein, and then find the "MacOS" folder
4. Modify the permissions on this folder to give it "execute" permissions for all users. Do this by opening the Terminal (located in Applications/Utilities) and typing the following command (don't press return afterward):
5. sudo chmod 755
6. After typing this, drag the "MacOS" folder to the Terminal window -- its path should appear. Press return, and you will be prompted for your administrator password, which you should enter.
The "MacOS" directory should now have read, write and execute priveleges for the owner, and read and execute privileges for the group and others.
Check CoreAudio As noted in Knowledge Base article #301658, some Apple applications might not open fully or at all if the Digidesign Core Audio driver has been installed as part of a Pro Tools version 6.9 installation.
Apple says to follow these steps if you are affected by this issue:
* Updating your Digidesign Core Audio driver may resolve the issue. You can find the latest versions for Mac OS X 10.3 (Panther) and Mac OS X 10.4 (Tiger) at http://digidesign.com/download/coreaudio. If that doesn't help, continue to step 2.
* Open Audio MIDI Setup (/Applications/Utilities).
* Click the Audio Devices tab.
* From the Default Output pop-up menu, choose Built-in Audio.
Check for errant plug-ins Some application launch failures can be caused by problematic plug-ins or other add-ons. Safari and other Web browsers are notorious for suffering from this issue, as are some other extensible applications like iMovie.
Check the following locations for any recently added files, or any files implicated in error messages generated when you attempt to launch the problematic application:
* /Library/Internet Plug-ins
* ~/Library/InputManagers
Re-apply the Mac OS X combo updater Try re-applying the latest Mac OS X combo updater from Apple's software downloads page. Doing so can resolve issues with system components or delete specific files that can resolve application launching issues.
Create a new user account Try creating a new user account, and check if the application launches under it. If so, a user-specific corruption issue is likely at play -- see the above sections regarding .plist files and caches.
Archive and Install As a last resort, try performing an Archive and Install process, which will retain some user settings but otherwise leave you with a fresh Mac OS X installation.
Also, check with the application's developer for compatibility notes regarding the version of Mac OS X you are running, and revert to an earlier iteration if necessary.

Installed applications will not launch?

I downloaded Photoshop CS6 on the Creative Cloud. It says it's installed to my computer. According to the Creative Cloud Help, it says, "To launch an installed app, click its icon, name, or a blank space on its line." However, the application does not show up on my applications folder and does nothing when I click on the app in the Creative Cloud panel. There is no error, it just simply does nothing.

same here

BSP Application does not launch in SAP R/3 4.7

Hi Experts,
We are trying to create a BSP application in SAP R/3 4.7. We are using the MVC architecture for the same. However, we are failing to launch the BSP pages. When the URL is launced either from SAP or directly in IE, the password prompt appears, after entering the user name and password it reappears again for 3 times and then throws a message invalid user name or password. This happens for all User Names. The passwords are correct though.
We have similar BSP Application in our SAP CRM 4.0 box and it works. I do not have much expertise in BSP, thus would want to know whether there are any BASIS settings that could be required in the system before we proceed. How do we know whether the system is compatible to BSP applications. We have even activated the BSP Application in SICF (Default_host -> SAP -> BC -> BSP -> SAP -> <BSP Application Name>). The current Support Pack version on the system are as follows,
SAP_BASIS Release 620 SAPKB62065; SAP_ABA Release 620 SAPKA62065.
Even if we try to launch the standard example BSP applications in the box, even they do not launch. The same problem appears. Do we need to make changes to User Roles level? All these user IDs have SAP ALL access though.
Please let me know how can I sort this out. Also let me know if you would need any further details.
Thanks for your help in advance.
Regards,
Subhrangsu

Hi Subbie,
in transaction SICF navigate to the service default_host->sap->public->ping. Right-click and select "Test Service". If this works then the BSP runtime is working okay.
Then navigate to the service sap->bc->bsp->sap->sbspext_htmlb and try the same there. On this service you will need to enter a username and password.
If all this works then you need to look clser at what you are doing.
Cheers
Graham Robbo

Smartview executable not launching in Workspace

We are currently on EPM version 11.1.2, and have been using Smartview 11.1.2.5, I have been able to download and run Smartview 11.1.2.5.400 on my machine and now I want to push it out to the users. When I replace the Smartview.exe and the Version.xml file, on D:\Oracle\Middleware\EPMSystem11R1\common\epmstatic\wspace\SmartView, and rebooted EPM, the executable still does not launch. It opens a blank IE window and doesn't do anything.
Following the Read Me instructions, I revised the version.xml file as well.
Any idea what else I need to do in order to run the executable from Workspace? thanks.

I don't think EPM 11.1.2.2 is compatible with Smart view 11.1.2.5.400.
Smart View releases beginning with 11.1.2.5.000 support EPM 11.1.1.4.x. Earlier versions of EPM are not supported. Customers need to upgrade to a higher version of EPM suite, preferably 11.1.2.3.500, the latest.
You can review the above information in this article.
Smart View Support Matrix and Compatibility FAQ (Doc ID 1923582.1)

Application will not launch

I have an application called sbcStudio that will not launch. The Dock icon bounces, nothing happens, but the application is listed when I open Force Quit. This happens every time there is a new OS Software or Security Update. I'm running Snow Leopard, and to get this program to launch again, I'm forced to reinstall OS X and then redownload the cumulative update package all over again. I was able to open the application when I created a new user account, so I'm wondering if this is some sort of user specific permission issue? Repairing permissions using Disk Utility doesn't solve the issue. Neither does deleting appropriate .plist files. What should I do?

yes, multiple times. Don't get anywhere useful as their reps are trained only on their own software, not on how it works with OS X. I'm actually on hold again at the moment with them.

App-V 5.0 standalone, application executable not launching

Similar Messages

Maybe you are looking for