App-V 5 Connection Groups on Client

All,
I am having an issue with a specific connetion group. If my tech's remove the connection group and applications and do a sync from with powershell the connection group does not appear in the client console or in powershell. If I run a get-appvclientconnectiongroup
-all, i see that it is there but I get the following:
Name : Intranet
IsEnabledToUser : False
The connection group is deployed to users and not to the machine. I do see in the operational log that the connection group was successfully configured.
Virtual application connection group {guid} version {guid} was successfully configured
In the client-catalog debug, there is a Package {guid}, version {guid} was not found in the user Catalog.
Our current client is 5.0 SP1 HF 3, but I have also verified the same behavior happens with 5.0 SP2 HF 4 as well.
My enviroment:
Management/Publishing Server App-v 5.0 SP1 HF2
Brian

Thank you Ben but...
Thats where I run into issues with the connection group. If I remove the computer connection Group and packages using the commands above, the connection group(s) do not come back. If I get-appvconnectiongroup -all, I can see that App-V
does see the connention group, but does not enable it for the user.
Name : Intranet
IsEnabledToUser : False
Brian

Similar Messages

Failed to Connect "Group Policy Client Service" Windows 7 x64

This error pops up everytime boot / start-up. I've tried everything, for the last month. including
http://support.microsoft.com/kb/2421599 In the "Resolution Section" did step by step, But did not work for me...
Also
http://blogs.technet.com/b/mempson/archive/2010/01/10/userenvlog-for-windows-vista-2008-win7.aspx Didn't work either. :(
Is this a Winlogin problem? Or does have to do with other computers in my homegroup?
But in Safe Mode & Safe Mode with Networking, this issue does Not appear / pop-up at start up. "Group Policy Client Service"
""HP Premium Remote Services"" tells me that in order to fix, I have to Re-Install Windows. And have been in contact today with Hp Premium Remote Services for over 7 hours with NO Resolution!!
Hate to make a Recovery Partition on a New PC, in order to Re-Install Windows...
This is a Brand New HP Pavilion HPE H8-1234 AMD Processor that I installed on 7/23/2012. Running windows 7 64-bit home premium, OS: Internet Explorer 9.
Have a copy of Windows 7 Ultimate using Anytime Upgrade, My question is would that rectify the "Group Policy Client Service" error?
Always run MalwareBytes Anti-Malware and Hitman Pro, in addition with Norton, on a regular basis. So that I know my system is clean...
Any MS Engineers or Tech's have any ideas, suggestions OR help, How to Fix this issue,With-Out having to use: System Recovery/Restore. To factory condition...
Would be Very Greatly Appreciated! HELP Me Pleeeze !!!!
***Because this issue Baogles my Mind! After all I'am only dealing with half a Brain, LOL- Due to Brain Tumor Surgery...

I FOUND SOLUTION TO THIS PROBLEM!
I had this issue on my laptop since November, and it really bugged me. I sifted through the event log and found the pattern of events that preceded the issue, and, probably, caused it.
In short, the pattern is as follows: Windows updates run automatically as scheduled, and when reboot is initiated after the updates are finished, the computer crashes (probably during reboot sequence). When it boots up, it reports that the last shutdown
was unexpected, and the issue begins to occur.
I spent 2 days trying to dig out a solution from the Internet, to no avail, until I came across
this page. It doesn't say anything about this particular problem, but it gives more information about SVCHOST process that starts many services, including Group Policy Client. It looks like during reboot a vital registry settings were lost during
crash and Group Policy Client "doesn't know" how to start. Let me explain:
There are two places to look in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path should contain
gpsvc key (a folder), which is responsible for service parameters and configuration. I found that the key was intact, so, you do not touch anything here - just check that the key exists.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SVCHOST This is the most important path you should look into, as it must contain the keys and values referred in the key #1. Below are descriptions what must be present
there.
There must be Multi-String value called GPSvcGroup. My laptop was missing it. So, you should create multi-string value named
GPSvcGroup and assign it value GPSvc.
Next, you must create a key (a folder) and name it GPSvcGroup - this key normally should be there, but, again, it was missin on my laptop.
Then open newly-created GPSvcGroup folder and create 2 DWORD values:
First called AuthenticationCapabilities and you must give it a value of 0x00003020 (or 12320 in decimal)
Second is called CoInitializeSecurityParam and it must have value of 1.
Once you complete all steps above, reboot the computer and the problem will be fixed.
I am so relieved I was able to fix it, and hope this will help others with the similar issue.
Here is the link to the video walkthrough if you have any troubles understanding what has to be done: http://youtu.be/4m5KEmckWK4
I did try the above, but it did not fix my issue with the ""group policy client service failed the logon".
This problem was happening on 5 different RDS Nodes. All I did was rename the Roaming Profile, then delete the locally stored profile on each RDS Server: right click COMPUTER > PROPERTIES > ADVANCED SYSTEM SETTINGS > USER PROFILES > delete the
offending User(s).
Hope that helps.
Life is dangerous, no one has ever survived. So enjoy!

Connection Group is published as 2 seperate packages

I have the weirdest issue in App-V 5.0
we use Windows 7 SP1 Clients with App-V 5.0 SP1
I add 2 applications to the App-V Server seperately :
SQL Navigator 7 & Oracle 10.2
they're both unpublished!
I made a new Connection Group named SQL Nav 7 & Oracle 10.2 and added the 2 packages.
when I publish the connection group ,the clients are getting the group ok for the first time.
after they logoff and logon - the connection group "Breaks" and they get them as 2 seperate packages THOUGH THEY AREN'T PUBLISHED AS PACKAGES!
there's nothing on the eventlog, I tried to sequence both of the packages again and - nothing. same result
any ideas ?! :/
Tamir Levy

OK. thanks everyone
some newer details:
I the command Get-AppVClientConnectionGroups and I get no output
when I ran Get-AppVClientConnectionGroups -All I got this output:
GroupId            : 7419b9fa-d1b8-43b8-a83e-6e2183290899
VersionId          : 3b40c4f1-3761-4aa2-9daf-961ce74e6278
Name               :
IsEnabledToUser    : False
UserPending        : False
IsEnabledGlobally : False
GlobalPending      : False
InUse              : False
InUseByCurrentUser : False
PercentLoaded      :
Priority           :
didn't understand what's the difference... but I was able to remove the connection group and the packages manually
then when I ran a manual sync via PowerShell I got this error:
Sync-AppvPublishingServer : There were errors encountered when trying to publish connection groups from the server
Operation attempted: RefreshPublishingServer.
AppV Error Code: 070000000F.
On the event viewer I see these errors now:
EventID: 1008
Category: Configure Package
Package {55182fc7-3f23-42b6-ba89-5c90c3300d80} version {1e373fdb-9e0d-4160-9f81-d80374ab9130} failed configuration in folder 'C:\ProgramData\App-V\55182FC7-3F23-42B6-BA89-5C90C3300D80\1E373FDB-9E0D-4160-9F81-D80374AB9130' with error 0xA040132A-0x3.
EventID: 19108
Catogory: Publishing Refresh
Failed to publish group due to the failure of the package.
Group GUID: {7419b9fa-d1b8-43b8-a83e-6e2183290899}
Group Version GUID: {3b40c4f1-3761-4aa2-9daf-961ce74e6278}
Package GUID: {55182fc7-3f23-42b6-ba89-5c90c3300d80}
EventID: 19106
Catogory: Publishing Refresh
Part or all groups publish failed.
published: 0
failed: 1
Please check the error events of 'Configure/Publish Virtual Application Connection Group' before this message for the details of the failure.
any help will be appreciated!
Tamir Levy

App-V 5.0 Connection Groups not syncing to Client

Hi,
i have installed an App-V Management Server and successfully created and published packages to a client.
I
then tried to create a Connection Group for some Internet Explorer
Plugins, which works on the server (adding packages, assigning to a
group, publishing), but fails to get synced on the client.
The client is listing all packages, but no connection groups.
App-V Management Server Version 5.0.1224.0
App-V Client 5.0 SP1 - 5.0.1104.0
I tried 5.0 SP2 Client before, but had the same problem...

If you assigned the packages and CG to a user, you can open a browser on the client machine (with that user) and connet to the Publishing Server URL. This should return above XML.
Note that changes on the Management Server by default take 10 minutes to get replicated to the Publishing Server - and then a sync-appvpublishingserver is required on the client to get the info down there.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

App-V 5.0 connection group odd behavior

I am having some odd behavior with an application that I've packaged in App-V 5.0. We are running App-V for RDS on Server 2012, and I'm on SP2.
The problem I'm having is with a program called SQL Tools 1.6 (a 3rd party tool, not from MS or Oracle). It's a fairly straightforward program, and it runs fine on App-V 4.6. But it requires an Oracle client to run. On App-V 4.6, we have
the Oracle client installed locally on the server. But with App-V 5, I wanted to make use of connection groups, so that we could use multiple Oracle versions, if necessary, and so that updating Oracle would be easier. So I have a connection group
that contains SQL Tools and the Oracle client.
What is happening is that when I try to launch SQL Tools, I get an error saying it can't find OCI.DLL (which is in the Oracle path). I took apart both packages, trying to make sure that the Oracle path variable was correct. I even added the Oracle
path to the SQL Tools package (I even tried hard-coding the local path to the Oracle package). I always get the same error. I also swapped the priority of the two packages, but it didn't help. Then I tried launching a command prompt in the
context of the SQL Tools package. When I checked the path variable, it was correct, and had the path to oci.dll. Out of curiosity, I tried running SQL Tools, and it launched no problem. Then I closed it and tried to launch it from the shortcut
on the desktop, and got the same error as before. I've tried launching it from various places (desktop shortcut, direct path to the executable, a command prompt without specifying the context of the SQL Tools package, etc.), checking compatibility mode
and setting it to various settings (XP SP3, Windows 7, Run as Administrator on and off, etc.), but nothing seems to work except opening a command prompt in the context of the SQL Tools package, and then running SQL Tools from there. As a workaround,
I created this short script that launches a command prompt in the context of the SQL Tools package, and then runs SQL Tools from that command prompt:
$p = Get-AppvClientPackage -Name "SQL Tools 1.6"
$cmd = '"C:\ProgramData\App-V\BB0D9EC0-3876-42EB-A5E9-92A149D52FB5\37F941F9-B4BA-425F-9FB4-9B699843E767\Root\VFS\ProgramFilesX86\SQLTools 1.6\SQLTools.exe"'
Start-AppvVirtualProcess -FilePath cmd.exe -ArgumentList "/k $cmd" -AppvClientObject $p
It works, but I would rather not have to use this type of workaround for something that should work natively.
Any help would be greatly appreciated.
Thanks,
Sam

Hello,
What happens if you launch CMD instead of your tool when starting an application, and from that CMD you start sqltools.exe
So the command to start the application would be;
cmd.exe /c sqltools.exe
Nicke Källén | The Knack| Twitter:
@Znackattack

Windows 8.1 cannot connect to group policy client service

Windows 8.1 laptop under administrator account has this "cannot connect to group policy client service" error.Found the following instructions on internet but I don't see this "Replace owner on subcontainers and objects" box on Permissions/Advanced
popup windows ???
Could anyone help ?
Change the permissions on the relevant keys configuring the Group Policy Client service to allow Full Control to Administrators
Open regedit (Start > type regedit in the search box) and navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\gpsvc
Right-click the registry key and choose Permissions.
Click Advanced, then click Owner.
Choose Administrators and check the Replace owner on subcontainers and objects box.
Exit the permissions dialog and then open it again.
Click Advanced, then choose Administrators and click
Edit…
Check Replace all child object permissions with inheritable permissions from this object.
Click OK and confirm; exit.
Thank you,

Hello CarLover,
Based on my test, the option Replace owner on subcontainers and objects exists in Windows 7, but doesn’t exist in Windows 8.1.
Please take a look at the screenshot about the option in Windows 7.
Please take a look at the following thread similar to this issue.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/why-wont-windows-connect-to-the-group-policy/b73107f8-8447-4599-87a5-65ecc6a63aa0
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Do App Tabs and Tab Groups maintain an active connection with the websites they represent?

I really like the concept behind App Tabs and Tab Groups. I have a few questions, though.
1. Will I use more memory opening a new window or creating a tab group with the same number of tabs? I am addicted to Alt+Tab and am frequently frustrated by tabs because I have to use the mouse (I don't use ctrl+1,2,3 because I can rarely remember where a given tab is in the sequence). I see there is a shortcut to access the panorama view, so maybe tab groups will work for me. It really is down to which method uses up more memory.
2. With tab groups, I assume the websites maintain a live connection until you close a tab or a group. This is not like a fancy shortcut, right? Is the same true of App Tabs? We have an unreliable connection speed and I am wary of keeping all my apps connected through potentially long periods of non-use.
At any given time, it is not uncommon for me to have 5 or 6 tabs open (per window), but if I use App Tabs, it could bump me up to 20 or more. Since a handful of my "apps" periodically update (fb, twitter, email, pandora, etc), I'm not sure it makes sense to keep them all active. Any thoughts/suggestions/recommendations on the subject are welcome.
Thanks!
~KJ

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

App-V Server : Changing Connection Group Name through powershell.

Hi,
Is it possible to change the name of existing Connection group through powershell ?
I've tried using Set-AppvServerConnectionGroup but i was unable to change the name of existing group.
Thanks,
Sumit.

Do this:
$group = Get-AppvServerConnectionGroup -Name "Connection Group A"
$group.name = "Connection Group B"
Set-AppvServerConnectionGroup $group
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

After restarting i get a message saying that Windows could not connect to the Group policy client service

The message i get is the following:
Windows could not connect to the Group policy client service. This problem prevents limited users from logging on to the system As and administrative user you can review the system event log for details why the service didn't respond.
This happens after restarting my laptop. It takes longer than usual and once it has booted up and loaded Windows Vista, I get the message on the right bottom corner as a window popping up.
I can still use my computer but a lot of my user account settings are not there.
I fixed it temporarily by rebooting using the option: boot up using my last successful configuration. Bu once I restart again the same thing happens.
How can i fix it?
Thanks.

Hi,
Please try the solutions on the following threads:
http://social.answers.microsoft.com/Forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-bfba-7a98e642c009
http://social.technet.microsoft.com/Forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1
If the problem continues, please let us know if the computer is in a domain environment.
Regards,
Bruce

APP-V 5.0 SP3 Connection Group error

Hi there,
After the upgrade whenever I try to publish a connection group this fails. It's a newly created connection group with 2 global published applications (which worked in app-v 5.0 sp1).
The error I get is:
Mandatory package {d2da0bdd-0613-4662-80ae-abf60f65a286}, version {9270b6bf-8681-4030-a1cc-904a105e5e1d} specified in connection group {43bbe1a4-6d83-4fc2-a916-68241f86d2c6}, version {957bb2b5-1c8e-450d-8cb3-783dfee6a240} has not been added to the computer
or has not been entitled to the user.
And after that:
Failed to create package group descriptor document from string.
Group: {43bbe1a4-6d83-4fc2-a916-68241f86d2c6}, {957bb2b5-1c8e-450d-8cb3-783dfee6a240}
Error code: 0x43E04109 - 0x14
Any idea's?

Hi there,
It was my mistake and the way we published app connection groups in the past. In the past we published the applications directly through an connection group without publishing the applications themself. In app-v 5.0 sp3 I needed to publish the packages itself
also....

ORA-03113 while connect from 8i client to 7 Server

Hi,
I have a Oracle 7.3.3 Server running on a SCO OpenSever 5.0.5 and a Oracle 8i Client 8.1.6.0.0 on a RedHat Linux 6.2.
When I try to connect from the client to the server by issue command "sqlplus user@test", it responses me "Error while trying to retrieve text for error ORA-03113". But when I run "netasst" to test the connection, it says the connection was sucessful.
Can anyone help? Here are my configuration files:
Listener.ora on Server side:
LISTENER=
(ADDRESS LIST=
(ADDRESS =
(COMMUNITY=TCP.world)
(PROTOCOL=TCP)
(Host=10.128.64.52)
(Port=1526)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST=
(SID_DESC =
(SID_NAME = test)
(ORACLE_HOME = /usr/app/oracle/product/7.3.3
(PRESPAWN_MAX=10)
tnsnames.ora on client side:
TEST.888.COM
(DESCRIPTION =
(ADDRESS_LISTS =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 10.128.64.52)
(PORT = 1526)
(CONNECT_DATA =
(SID = test)
)

Hi,
I don't have a 64 bit instance, but maybe another test will be usefull, try to get a connection with sqlplus on the server but via sqlnet like "user/passwd@tnsentry" I think if that also is not possible it is not the 64 bit issue but more that the listener itself coundn't etsablish a db connection, be aware tnsping is only testing if the listener is running and do not check if the listener is able to connect to the db.
Hope this helps a little to find your real proble ;-), Olaf

Messages.app no longer connects to Jabber after App Store auto-installed Remote Desktop Update 3.8.2

Messages.app no longer connects to my company's Jabber server after App Store auto-installed Remote Desktop Update 3.8.2 (even though I never purchased that app). The Remote Desktop app can not be found anywhere on my machines.
I suspect the Remote Desktop update because Messages stopped connecting on my office MB Air after the update but still worked on my home iMac. Next day the iMac received the update and Messages stopped connecting on that machine too.
Messages attempts to connect for several minutes (it's been trying for 30 mins as I type this) and just hangs. Occasional I get the following error message:
Error: Messages lost the connection to the Jabber account 'account'. A network error occurred.
I've tried:
- Deleting and recreating the Jabber account in Messages.app
- Toggling on/off SSL (SSL required by our server)
- Toggling on/off auto detect server and port (port 5222 on our server)
- Deleting every plist, cache, etc., I could find in the Library for any IM client I've ever used
- Checked that Keychain trusts the Jabber server SSL certificate (it is a self signed cert)
- Tried connecting from three completely different networks including the company VPN
- Multiple PRAM resets
- Setup a Google Talk account in Messages - works fine
I'm at a loss...
Kurt

I installed and setup Adium. Adium works but Messages.app still does not connect to Jabber.

Please wait for the group policy client - shutting down issues

Hi
I have issues with shutting down machines. When machine is connected to company's LAN everything works fine. However, if machine is connected to VPN - Juniper NC - 1 hour or more it always hangs when it is shutting down. When I shut down the machine
(verbose mode on), first stage is:
Please wait for the system Event Notification service.
This ends exactly
after 3 minutes. Next stage:
Please wait for the group policy client windows 7
...is never timed out (even after few hours). Machine never shuts down.
In Application logs there are always these 4 events when machine is unsuccessfully shutting down:
6005: The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
4627: The COM+ Event System timed out attempting to fire the Logoff method on event class {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} for publisher and subscriber . The subscriber failed to respond within 180 seconds.
The display name of the subscription is "ISensLogon2". The HRESULT was 80010002.
6006: The winlogon notification subscriber <Sens> took 180 second(s) to handle the notification event (Logoff).
6005: The winlogon notification subscriber <GPClient> is taking long time to handle the notification event (Logoff).
Sens is timed out after 3 minutes while there is no 6006 event for GPClient and machine is stuck there for ages (Please wait for the group policy client
stage). I noticed in System logs that machine always hangs if there is this error
5783: The session setup to the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not responsive. The current RPC call from Netlogon on \\machine to \\server has been cancelled.
I made a group policy log and below you can see part of GPSVC log when machine is unsuccessfully shutting down:
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe58
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(438.1a04) 21:31:24:327 Waiting for user group policy thread to terminate.
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe10
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(218.c88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xdcc
GPSVC(218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0x20cc
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xd90
GPSVC(218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.d48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0x525
GPSVC(218.d48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
GPSVC(218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x2100
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x1264
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
I tried with signing out from VPN before shutting down machine, I even switched off WiFi but machine still hung. If i tried to get GP results before shutting down machine it takes ages and it is stuck in "Getting the user name" stage.
Gpupdate /force never updates policy (It stops at Updating Policy...). I tired with installing different hotfixes which did not resolve the issue. I never have any
issues with logging in, no GP scripts are applied when user is logging off or on, no roaming profiles. The only issue is when machine needs to be shut down.
I excluded 1 machine from GP and left it on VPN for a few hours, several times. It always shuts down successfully. I applied GP back one by one and the one which is presumably causing an issue is Avecto which adds admin rights when VPN application
starts (event 100):
Process started with admin rights added to token.
Command Line: "C:\Users\User\AppData\Roaming\Juniper Networks\Setup Client\JuniperSetupClient.exe"
Process Id: 5540
Parent Process Id: 2252
Policy: EA-PrivilegeGuardSettings.UK Policy
Application Group: EA-PrivilegeGuardSettings.Applications Granted Admin Rights
Reason: <None>
File Name: c:\users\User\appdata\roaming\juniper networks\setup client\junipersetupclient.exe
Hash: 27D8463A913A802E555AEEF45717B122249AA993
Certificate: Juniper Networks, Inc.
Description: Juniper Setup Client
Application Type: exe
Product Name: Juniper Setup Client
Product Code: <None>
Upgrade Code: <None>
Product Version: 8.0.6.48695
I guess there is a DNS issues when machine is on VPN which leads that GP cannot be applied / updated. Not sure if or why Avecto would have an impact on this. When machine is trying to shut down it still somehow thinks it is connected to DC. What
I also noticed are several explorer crashes while machine is on VPN.
Does anyone have same issues? All machines are Dell with Juniper NC (VPN).
Thanks,

Hi,
According to event log, Winlogon process takes a long time to handle logoff event. That's to say winlogon process is waiting for response to logoff.
According to your description after, this problem is most probably caused by Avecto. You can try to disable or uninstall it temporarily for test.
To make further troubleshoot with this problem, you can try to use WPT (Windows Performance Tool) to make troubleshoot.
http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Group Policy Client service does not start

Hi,
As soon as I (administrator on my PC) logon to Windows 7, I get a message saying that the Group Policy Client service failed to start. I'm not sure why I'm getting this error even though the dependencies are very much up and running..
Below is the error message I get in the notification area as soon as I logon
Failed to connect to a windows service
Windows could not connect to the Group Policy Client service. This problem prevents stndard users from logging on to the system.
As an administrative user, you can review the System Event Log for details about why the service didn't respond.

I FOUND SOLUTION TO THIS PROBLEM!
The crash of your computer caused that - you are absolutely right!
I had this issue on my laptop since November, and it really bugged me. I sifted through the event log and found the pattern of events that preceded the issue, and, probably, caused it.
In short, the pattern is as follows: Windows updates run automatically as scheduled, and when reboot is initiated after the updates are finished, the computer crashes (probably during reboot sequence). When it boots up, it reports that the last shutdown
was unexpected, and the issue begins to occur.
I spent 2 days trying to dig out a solution from the Internet, to no avail, until I came across
this page. It doesn't say anything about this particular problem, but it gives more information about SVCHOST process that starts many services, including Group Policy Client. It looks like during reboot a vital registry settings were lost during
crash and Group Policy Client "don't know" how to start. Let me explain:
There are two places to look in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path should contain
gpsvc key (a folder), which is responsible for service parameters and configuration. I found that the key was intact, so, you do not touch anything here - just check that the key exists.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SVCHOST This is the most important path you should look into, as it must contain the keys and values referred in the key #1. Below are descriptions what must be present
there.
There must be Multi-String value called GPSvcGroup. My laptop was missing it. So, you should create multi-string value named
GPSvcGroup and assign it value GPSvc.
Next, you must create a key (a folder) and name it GPSvcGroup - this key normally should be there, but, again, it was missin on my laptop.
Then open newly-created GPSvcGroup folder and create 2 DWORD values:
First called AuthenticationCapabilities and you must give it a value of 0x00003020 (or 12320 in decimal)
Second is called CoInitializeSecurityParam and it must have value of 1.
Once you complete all steps above, reboot the computer and the problem will be fixed.
Video walkthrough for those who are not very technical is here: http://youtu.be/4m5KEmckWK4
I am so relieved I was able to fix it, and hope this will help others with the similar issue.

App-V 5 Connection Groups on Client

Similar Messages

Maybe you are looking for