APP-V 5 Reporting - Start_Time and End_Time are wrong

Hello,
Has anyone else experienced issues with the Start_Time and End_Time in their reports? We are using APP-V 5 with latest SP and hot-fixes. If I launch an app 10:00 AM, the reports show it was launched at 4:00 PM. I have checked the time zone settings
on clients and server and they are all set the same and proper.

What is your local time zone? I haven't checked, but I could imagin that the XML files store the time in UTC.
In fact that doesn't explain time stamps that have different minutes.
The reporting data is then sent to the reporting server and that sends the data into the database. So, also the reporting server's time zone settings, the database server's time zone setting may have an impact.
Indeed this doesn't explain all the things you've seen
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Similar Messages

How can I maintain start_time and end_time in my audit table for mydbms_job

Hi Guys,
Need some help on runing this job, I need to maintain start_time and end_time. However we are getting job details from the user_jobs table.
DECLARE
l_job BINARY_INTEGER;
BEGIN
DBMS_JOB.SUBMIT(l_job, '<your job code>', sysdate, 'sysdate + 1/24');
COMMIT;
END;
Here I am planing to use audit log table which I have created with job_name,start time,end_time. Once I execute this job, I need to audit the job with start and end times. Is it possible.
can any one help me on this.
Thanks in advance!
-KLR.

If you switch from dbms_job to using dbms_scheduler (as recommended by oracle) then this auditing information would be delivered out of the box. For scheduler jobs there are much better dictionary information then for the older dbms_jobs solutions.
Views like this
select * from user_SCHEDULER_JOBS;
select * from USER_SCHEDULER_JOB_LOG;
select * from USER_SCHEDULER_JOB_RUN_DETAILS;

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, however when I touch them, they do not load and bounce back to the main screen. Any suggestions on how to fix?

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, but when you touch them, they do not open and bounce back to the main screen. Any ideas on how to fix?

Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing.

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance. 
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily. 
You can also place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
You can middle-click that Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

todaywillbegreat wrote:
''' I have tried everything but restoring my iPad to its orginal condition. What do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I am trying to install flash player on my new Macpro hardrive. It is downloaded but I get the continual message that my I.D. and password are wrong. Help please!

I am trying to install my downloaded flash player on my new MacPro hard drive. I get the continual message that my I.D. and password are wrong. I know they are not wrong and have tried a lot of combinations from old Macs and old passwords too. Nothing works. How can I get the job done?

Hi,
On Mac, this password prompt is presented by your operating system, and is intended to keep you from accidentally installing software which can harm your system. Flash Player does not throw this prompt, Apple does that.
Please provide machine credentials of currently logged in User to continue with the installation.
Hope this helps.
Thanks
Piyush

Date and time are wrong

My date and time are wrong on boot up and won't adjust back to normal automatically. I think the internet is telling me it's a problem with either my PRAM or CMOS or NVRAM battery, the little guy that holds info while the big guy is tapped. I want to replace this. Is that possible? What is the battery actually called?

Hey MisterW,
Thanks for the question. It sounds like you wish to reset your PRAM/NVRAM, the following article should assist you:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Thanks,
Matt M.

Trying to send a photo via e-mail from iPhoto. But it says my e-mail and password are wrong and won't send and I don't know how to correct it. Where do I go?

Trying to send a photo via e-mail from iPhoto. But it says my e-mail and password are wrong and won't send and I don't know how to correct it. Where do I go?

In the iPhoto preferences ==> accounts delete the account and re-enter it
LN

WM_SETFONT On ListView Works, But GetTextMetrics And GetTextExtentPoint32 Are Wrong.

Hi again folks:
   The user can use a dialog to set the font typeface, size and type (bold or italic) for a ListView in a dialog.
   This works great by setting the user's choices in a LOGFONT and deriving a font handle, then sending the font handle to the ListView with a WM_SETFONT message.
   The text of the header labels and the list are the selected font, size and type.
   The problem is that I need to adjust the width of the columns.   The size returned from a call to GetTextExtentPoint32() or the average char width returned by a call to GetTextMetrics() appear to be the default sizes, and are unchanged
by the choices the user makes.
   So the columns can be too small for the larger fonts in the ListView.
   After setting the ListView fonts, I've tried the HDC from the ListView and the ListView's header. GetTextExtentPoint32() and GetTextMetrics() are the same for either HDC, and seem to be unchanged by any choice made by the user.
   So I can't adjust the column width for the new font.
   What am I doing wrong?
      Thanks
      Larry

Thanks Dave:
   I'm guessing this is a common mistake.
   I was under the impression that a device context created for a window, or control, would have the font used by that window.
   After posting, I tried this simple experiment;
    SendMessage(listview_handle, WM_SETFONT, (WPARAM)control_font,
TRUE);
   listview_hdc = GetDC(listview_handle);
   SelectObject(listview_hdc, control_font);
   GetTextMetrics(listview_hdc, &tm);
   ReleaseDC(listview_handle, listview_hdc);
#ifdef _DEBUG
   HDC listview_dc2 = GetDC(listview_handle);   HFONT test_font = HFONT(SendMessage(listview_handle, WM_GETFONT,
0, 0));   HFONT old_font = HFONT(SelectObject(listview_dc2, test_font));
   DeleteObject(old_font);
   TEXTMETRIC test_tm2;
   GetTextMetrics (listview_dc2, &test_tm2) ;
#endif
   The GetTextMetrics() call in the ifdef clause delivered the wrong values until I added the WM_GETFONT and the SelectObject.
   So I'm guessing I need to add those lines to any code that needs to know the dimensions of the font.
   Is there some reason the device context doesn't know the font of the window used to create it?
   I believe I can safely DeleteObject() on anything returned by SelectObject(), without damaging stock objects. Is this correct?
   Does Direct2D sidestep these issues, or will I still be contending with these GDI "features" if I move the the new interface?
   I appreciate the time you have taken to assist me.
      Thanks
      Larry

Mail says my gmail usernames and passwords are wrong but they're not

I'm trying to set up my gmail account on my laptop and iPhone but everytime I try I get an error message that reads "Logging in to the Gmail IMAP server “imap.gmail.com” failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn’t correct, you cannot receive messages." I get this message on both devices but when I log onto gmail from a web browser using the same info everything works perfectly. The username and password are correct but mail say they're wrong. Any ideas?

Mac OS X Mail Setup Assistant
Gmail Apple OS X - Bing
http://www.apple.com/support/mail has more support articles

Why does Adobe so often tell me my ID and password are wrong?

I'm very frequently told that my ID/password are wrong!! I change them and then soon get the same annoying message. How do I stop this recurrent problem?

jedokie
The Adobe Chat sounds intriguing. Was the bottom line on the chat resolving or unresolving?
If you want to send a copy of the chat to me for private viewing, I think the better way would be to send it to me via the Adobe Forums private message system.
To do that, click on my ID at the top of one of my replies in your thread in order to open to my profile page. To the right of that page you will see an orange envelope icon with the word Message next to it. That is the route for the private message sending.
I am going to ask a moderator to remove your email link since any contact information in these threads is public, and your email address would be open to nuisances.
If you have DVD-VIDEO on DVD disc, you can rip (copy) video files from that disc and get the video Files (VOBs) to the Premiere Elements Timeline for editing and exporting. Some insists that these video files (VOBs) should be converted to MPEG beforehand. That is not necessary for Premiere Elements and the route described. If problems surface in the route cited, then we troubleshoot them for many factors. All you are going to do in process
a. put your DVD disc in the DVD/CD burner tray
b. open Premiere Elements (pre-set to DV standard or widescreen) and use Add Media/"DVD camera or Computer Drive"/Video Importer where you select your video file(s) VTS_01_1.VOB and, if large DVD content, more in that series.
More details to follow if necessary.
Thanks.
ATR

My iPhone 4 suddenly cannot update apps even when my ID and password are correct. It tries to update but cannot connect.

Any one has an idea?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT3702 I can't update my apps because it says my account details are wrong when it's not

Bank details are correct but iTunes won't accept the payment

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Acrobat Pro 9, measurement and units are wrong?

when I measure perimeter or area, and input the correct ratio from the blueprints of say .25" = 1 foot, the corresponding output from the tool is wrong...how to adjust the ratio so it's correct?
I have toggled the "use units from document" on/off, tried custom ratios but nothing seems to work.
Is this a problem, am I missing something?
Thanks, Jim

Skip this, I figured it out. Doh! Jim

APP-V 5 Reporting - Start_Time and End_Time are wrong

Similar Messages

Maybe you are looking for