App-V 5 SP2 as RemoteApps and User Profile Disks with Error Error 0xc0000142

App-V packages are published as RemoteApps and User Profile Disks are used.
Similar to the problem posted
here .
Some packages are running without an error (e.g. Acrobat Reader) and some other (e.g. Notepad++) could not launch.
The result is "The application was unable to start correctly (0xc0000142). Click OK to close the Program.
If UPD is disabled, packages running before gets now the error and the non-launching apps are running now.
The post by Steve TH "App-V 5.0: On these 0xc0000142 errors and where they are coming from" give
me an idea what´s may going on. But could not find anything related in the logs.
An answer was set as solution in this
post but it´s not clear for me, how to setup the Sequencer.
8.3 is enabled on all VMs.
How to setup the sequencer and the UPD configuration to run this scenario without the error?
/vkleinerde

Hello,
First thought is just to make a copy of the prod RDS-server, sequence on it and then see how it goes?
Nicke Källén | The Knack| Twitter:
@Znackattack

Similar Messages

User Profile Disks with Windows Search

We have 2 RDS Servers (2012R2) and work With User Profile Disks
We use outlook cached mode (Outlook 2013 SP1) because the link to our head office is to slow
The problem is that the outlook search isn't working properly.
Every time the users logs on, search indexes are recreated
This proces never finishes because the server is under a constant load, therefore search never works as it should.
In eventvwr, we see this error alot:
Crawl could not be completed on content source <winrt://{S-1-5-21-xxxxxxxxxxxx}/>.
Context: Application, SystemIndex Catalog
Details:
The parameter is incorrect. (HRESULT : 0x80070057) (0x80070057)

Hi,
I have been searching for a solution for this issue in a client environment for a few months now.
Our environment is similar, RDS on Server 2012 R2 with Outlook in cached mode and the search service enabled However we are using Outlook 2010.
I disagree that the issue should be marked as resolved.
I believe you are experiencing the same issue as I and these 2 other people:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/e6d4e3e6-37ef-488c-86ac-d135e3f2353f/windows-search-index-and-user-profile-disks?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dc6328e9-96dc-4377-a23f-0fb7020e5daa/indexing-user-profile-disk-on-a-file-server-or-on-the-rdsh-server?forum=winserverTS
When users logon, the search service begins indexing and if the user is logged on long enough it completes user files, including the OST.
However when the user logs off, Windows deletes the search data as it believes the profile has been deleted. The profile has not been deleted, the profile disk (UPD) has merely been dismounted.
We really need a resolution for this, this shouldn't be happening. The profiles are not getting deleted and the index is getting deleted for the wrong reason.
Furthermore if this issue is not fixable, then it will delay our push to move clients to Office 365. If we cannot index offline email on RDS, then we simply cannot move our Exchange servers offsite.
Unfortunately no resolution has been provided from Microsoft as yet to any of these 3 people who requested support.
Can anyone else shed any light on this?
Thanks, Nigel

User Profile Disks with Windows Server 2012 and Windows 8 VDI

Hello experts!
We are building a new server setup for the office and are unable to figure out why UPD will not work. We have VDI setup and a user for instance
connecting through the RDWeb workplace will dynamically get one of the available Windows 8 Machines delivered through Hyper-V and can successfully login on this machine via Active Directory. So far so good...
However, when we activate the User Profile Disks "UPD" feature the login takes forever and the VHDX will not mount on c:\users\...
as expected within the virtual Windows 8 machine.
The UPD config is quite simple, with just the path "\\vmhost\upd\" set. This share has (now during test) full access for everyone,
both on share level and on security level, but still the VHDX will not mount.
The UVHD-template.vhdx file gets created just fine when UPD is activated, and during login through RDWeb a TEMP-UVHD-S-1-5-21-1477358240-4159876597-995667825-500.vhdx
gets created, but there it stops... The login process takes a couple of minutes by the "Windows förbereds" (roughly translated to English "Preparing Windows"), and then the user gets logged in with a temporary profile.
- The event log says (translated using Google translate):
Failed to obtain a user profile disk for the user account with SID S-1-5-21-1477358240-4159876597-995667825-500.
Make sure the location of the user profile desk can be reached, the server's computer account has read and write permissions to the site and that there is a template file for user profile disks at the site.
Name of the virtual desk"font-size:14px;font-family:'Droid Serif', Georgia, 'Times New Roman', serif;color:#222222;line-height:23px;"
/>HRESULT: 0x8007007B.0
Please help, it should not be that hard to achieve this.

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many
similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer
as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Office 2013 VL and app-v 5 SP2 on RDS server - package add fails with script error

We have used the MS Office Depolyment Tool for click-to-run to download the latest Office 365 version, and flatten it into an app-v 5 package - not a problem.
When we try to add the package to our client machine (Server 2008R2 running the app-v 5 SP2 client software), it fails with an message that a script has failed and not returned a 0 code. We have not added any scripting to this automatically created
package, so it seems that the app-v client does not like the "official" package. Any hints and tips gratefully accepted, thanks
App-v client has scripting enabled.
The powershell command line we are using is:
PS C:\windows\system32> Set-ExecutionPolicy Unrestricted
PS C:\windows\system32> Add-AppvClientPackage -path file://hostname/app-v/o365-noaccess/ProPlusVolume_en-us_zh-cn_x86.appv -DynamicDeploymentConfiguration \
\hostname\app-v\O365-NoAccess\ProPlusVolume_en-us_zh-cn_x86_DeploymentConfig.xml
with a result of:
Add-AppvClientPackage : Embedded Script process exited with an error code indicating failure (return code other than 0). Please ensure that Embedded
Script process can complete successfully and exits with 0.
Operation attempted: Configure AppV Package.
AppV Error Code: 100000000C.
Please consult AppV Client Event Log for more details.
At line:1 char:1
+ Add-AppvClientPackage -path
file://hostname/app-v/o365-noaccess/ProPlusVolum ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidResult: (:) [Add-AppvClientPackage], ClientException
    + FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientPowerShell.AddAppvPackage
and these are the error messages we see in the debug app-v client logs:
Script Launcher successfully waited for script with command line: '"C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root\..\Scripts\Integrator.exe" /I /Msi /License /AppV PackageGUID=D24C3BDD-8FAD-44d3-998C-933F8F053682
PackageRoot="C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root" MsiName=SPPRedist.msi,SPPRedist64.msi PidKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx,xxxxx-xxxxx-xxxxx-xxxxx-xxxxx,xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
PRIDName=ProPlusVolume'.
and...
Package {d24c3bdd-8fad-44d3-998c-933f8f053682} version {cd9725ce-4503-4932-863b-4fcda3f9551d} failed configuration in folder 'C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D' with error 0x79100E10-0xC.
and...
machine script for event AddPackage with command line: '"C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root\..\Scripts\Integrator.exe"'
exited with failure error code: The extended attributes are inconsistent.. Because Rollback is set to true in the script definition, the current AppV Client operation was rolled back.
We believe this last error message is the kicker, but can't debug any further.

Just to validate the problem, I started again.
I have just downloaded the latest ODT from MS, and then downloaded the latest Office 2013 packaged - volume license. Then created the app-v package - all went perfectly, no error messages. Uploaded the package to the app-v 5 server and published
it. I have made NO changes to any of the files.
I have just built a brand new Windows Server 2008R2 Datacentre VM, patched it to the hilt, and installed the RDS role, powershell 3 and appv 5.0 SP2 client for RDS.
I then use powershell as above:
          scripting unrestricted
          app v client scripting enabled
         app v server added
          global and user update enabled
         add-appvclient package "url of office package.appv"
             and received exactly the same error message.
It is not complaining that scripting is not allowed, it is complaining that the script is invalid.
Help!!!!

Server 2012 R2 user profile disks and outlook search not working

Hi,
I`m having a problem with my setup for quite some time now with Windows Search and indexing the outlook OST files.
I`m using user profile disks in my setup but it seems that Windows Search can`t index the user profile disks, hence when i`m searching in outlook (the OST file is located in the user profile disk) with windows search enabled i`m not getting any results because
it can`t index the OST file.
If I don`t use the disks then windows search works fine but because i`m using clustered TS servers I need the profile disks and I don`t want to go back to redirects if possible..
At the moment I`ve disabled Windows Search which forces outlook to search online, it works but is slow..

Next issue that popped up, after the user logs off it will deleted the indexed data and start over the next time the user logs on..
Any fix for that?
There are three other Technet threads describing the same exact problem about indexing data being deleted when a user logs off from RDS. I'm experiencing this bug also and haven't found anything to fix it yet.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dffeb258-b985-452b-82f3-b66b950b98b6/user-profile-disks-with-windows-search?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/e6d4e3e6-37ef-488c-86ac-d135e3f2353f/windows-search-index-and-user-profile-disks?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dc6328e9-96dc-4377-a23f-0fb7020e5daa/indexing-user-profile-disk-on-a-file-server-or-on-the-rdsh-server?forum=winserverTS
my PC Techs http://www.mypctechs.com

User Profile Disks - exclusions not working

I'm utilizing User Profile Disks to handle profiles between my Session Host servers. I have some odd requirements on which folders need to be included in the UPD, so for this reason, I am using the option of "Store all user settings and data on the
user profile disk" and then I am trying to exclude specific folders. However the exclusions are not working properly.
For example, I am trying to exclude AppData\Roaming\Adobe. In Server Manager under the profile disk settings, I add an exclusion of \AppData\Roaming\Adobe.
However after I connect to a RemoteApp and my profile disk is created, when I mount the UPD, I see that this folder is still created inside the VHDX. Am I entering the path incorrectly? How would I properly exclude a specific folder from being redirected
to the user profile disk?

Hi ,
This issue may occur if the user profile was manually deleted by using the command prompt or by using Windows Explorer and if the “Do not logon users with temporary profiles” Group Policy setting is configured.
A profile that is manually deleted does not remove the security identifier (SID) from the profile list in the registry.
If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded.
To resolve this problem open yourself, follow these steps:
Right click Computer > Properties > Advanced system settings > Advanced tab > Under User Profiles, click Settings > In the User Profiles dialog box, select the profile that you want to delete > click Delete > Apply/OK.
Also check your Synchronization Connection Settings in User Profile Service application also make sure you are running this service application with Service Account i.e. Account with Farm Admin permission.
Please mark the same as answer if it helps you.Thanks.

Unable to Enable User Profile Disks in RDP server 2012R2

I am setting up a new Windows server that will act as an RDP server. The server has been built with Windows Server 2012R2.
I have the following roles and services working on the server: RD Web Access, RD Gateway, RD Licencing (with 30 user cal licences), the RD Connection broker, and the RD session host.
I have a SSL certificate configured and installed on the site, and both external and internal DNS are configured and working.
I have created and published an application collection and this is working. That is, when you go to https://remote.<servername>.org you are presented with a log in screen, users can log in with their domain accounts and then can connect to the published
applications, this is working both on our internal network and from the general internet.
So all the roles on the server are working and the collection itself is also working. However, what I cannot do is set it up so that we can use user profile disks with that collection. When I go through the Session Collection Wizard and I get to "User
Profile Disks" I can click on "Enable user profile disks" and then you can enter the options below.
I am entering the share location under location \\<servername>\<sharename>
I am using the default "store all user settings and data on the user profile disk"
Then I go to create the profile disks and I get the following error:
"Could not create the template VHD. Error Message: -2147024809
This has happened multiple times, I have done the following:
- installed all windows updates and rebooted the server, same error
- checked the share permissions AND the folder permission for that share, for testing purposes I have set permissions on both the folder and the share to allow full control to "everyone" (I also tried it with only "domain users") but
same error message.
- I have checked to see that no quotas are imposed on the disk where I am attempting to create the profile disks - this was because this was the closest thing I could find on Technet was this post:
https://social.technet.microsoft.com/Forums/windowsserver/ru-RU/aec30527-d742-42b9-950e-85c709c4cb45/vdi-problem-creating-user-profile-disks?forum=winserverhyperv
And that was a quota issue that I am not having.
The UPD wizard says the following "the servers in the collection must have full control permission on the user profile disk share and the current user must be a member of the local Administrators group on that server"
Both of those things are true.
I have attempted to search for that specific error message (-2147024809) and have found nothing on Technet or any other site.
I am hoping someone here has some thoughts. Thanks in advance.

I was looking at both the technet article for setting up UPD as well as this walk-through:
http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
where 'everyone' has full permissions on both the share and the folder.
I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
in all cases.
I also found this Technet article:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue?

Server 2012 RDS - User Profile Disks - Errors during Logoff

I have set up a test Server 2012 RDS collection (Single Server for now) and implemented User Profile disks.
I have two problems.
First: My generic test user can connect and does successfully use the user profile disk as expected. However, at
logoff, the system event log contains these errors:
The error (NTFS 137) is: The default transaction resource manager on volume C:\Users\ts3.test encountered a non-retryable error and could not start. The data contains the error code.
The warning (NTFS 50) that concerns me is:
It appears that the user profile disk is being "disabled" or "disconnected"
before the profile data is completely written at logoff. What can I do to troubleshoot this?
Second:
Update: A post from Mike Connor on the following page: -LINK- solved
the problem described below.
My administrative user always logs on now with a temporary profile. At the beginning, the UPD was working and mounting. That stopped working. In attempting to troubleshoot, I logged the admin user off and deleted the UPD disk
file from the share. I remember it working again after generating a new UPD disk file in the share. Soon, it quit working again. I deleted the UPD disk file again from the share and ever since, it has never regenerated a new UPD and
always logs on with a temporary profile.

We experience less to zero problems after an outage with our User Profile Disks when we use the option: "Store all user settings and data on the user profile disk". Other then when we use the other checkbox (even though all checkboxes
underneath are checked).
Our test setup was, an RDSH 2012 r2 server(s), with an 2012r2 server holding the share.
We first tried the "store all user settings" for the User Profile Disk, we logged several accounts onto our RDSH Server we then disconnected our server which holds the share to simulate an outage. After about 5 minutes we connected the
server again holding the share. When the share comes back online, we logged off the users and logged them back in. The result was a valid profile for all the accounts including their last changes from before the share got disconnected.
The exact same test was done with the option: "Store only the following folders on the user profile disk" with all checkboxes underneath checked, which gave us corrupt profiles.. We also did these tests by giving the server holding the share a reboot instead
of an disconnect from network. This gave us the same result. Each test was done at least 2 to 3 times..
I hope others can confirm this as well in their situation, as it seems to be a bug within that specific checkbox.
Looking at the above tests, the best way in my test cases were to exclude the default folders (f.e.: \Documents) if you would like to redirect them instead of using them inside your User Profile Disk. Redirects can be done through GPO Folder redirection
options or GPO registry combined with Environment Variables.
Even after several attemps to simulate an outage, i get left with consistent profiles. I've now also included an hard reset of my virtual machine (that gave the same results as a disconnect of the network card). This was all done through using the: "Store
all user settings in the user profile disk". The other option left us with inconsistent profiles. I hope others can confirm this as well..
Looks to me that the type of connection towards the User profile happens different. You can see this when looking at the C:\users\<username> and subfolders if you use user profile disks. The 2 options show different symbols as well.

App-V 5.0 SP2 RDS Client with hotfix 2 breaks frequently on Windows 2012R2 with User Profile Disks enabled

Hi All,
I am at my wit's end trying to troubleshoot this, so any help would be greatly appreciated.
We are having serious stability issues with App-V 5.0 SP2 RDS in our environment with User Profile Disks enabled.
We have applied the latest hotfix but the issues persist.
The main problems are:
1. Periodically the client seems to become corrupted and all applications stop working for all users. All applications including the official Microsoft Office 2013 ones - not just our packages.
The symptoms are the same as if I change the App-V Client Service account to run under a user account instead of SYSTEM, so it suggests a file access issue. The log files also hint at this, and one of there errors is similar to this:
The virtual application 'C:\Users\rds.user9\AppData\Local\Microsoft\AppV\Client\Integration\A3EF9C01-C0E9-4AC5-B21F-DB9B1D2F700C\Root\Mindjet\MindManager 14\MindManager.exe' could not be started because the
App-V Subsystem 'Virtual Filesystem' could not be initialized. {error: 0x6740090A-0x20003}
Once this problem occurs the only way I have found to fix it is to either completely remove and reinstall the client, or (perhaps this is the big clue) rename the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\MAV\Configuration\Volumes , unpublish
an application, then republish said application.
I don't even think it matters which application gets published. The point seems to be that this 'Volumes' key gets rewritten.
I am highly suspicious that our issues are caused by User Profile disks in our RDS environment, as when I disable them on our staging collection all of these issues seem to disappear.
I have made sure all of the servers have permissions on the share (folder and share permissions). It doesn't seem to make a difference.
2. Some application fail completely with User Profile Disks enabled. If we switch the setting from "Store all settings and data on the user profile disk" to "Store Only the following folders" there seems to be some improvement,
in that at least one application that fails on the other setting starts to work.
3. We have already set that NTFS 8 dot 3 reg fix some time ago.
SOS!
We have gone live this week (not my call) and this is having disasterous consequences. :(
Thanks in advance,
John

Hi,
Thanks for your response.
I did try this a while ago without success, although it may be worth revisiting with SP2 applied.
I have left this client now.
I left them a Powershell script that deletes HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\MAV\Configuration\Volumes
and triggers an Unpublish/Publish of an application we have deployed to all of the servers.
This seems to work, but a fix would be better than a workaround.
Not really my problem now though - I did my best.
Thanks,
John

MDOP 2013: App-V 5 SP2 Application Publishing and Client Interaction Guide Now Available

Hello App-V forum users,
Do you want to understand the details of how App-V publishes and runs applications? See
this Springboard Series blog post, which describes the newly available App-V 5 SP2 Application Publishing and Client Interaction Guide.
Enjoy!
-Tony
IT Pro Audience Manager for Web Forums

Hello,
I am truely confused by how you are attempting to achieve things.
1. The Office 2013 package is only supported if deployed globally
2. AppLocker is the way to restrict users from starting different applications
3. Office 2013 is not supported to be published to users
It seems you have issues with #3. Which is not supported. I am not saying it "doesn't" work, but considering you have issues with it - perhaps we can start by not doing it?
Ok, so what do we have left;
Per your statement, Office 2013 is published globally. Ergo, all shortcuts and applications should be available to all users.
Is this true?
Nicke Källén | The Knack| Twitter:
@Znackattack

I cannot download in-app purchase . I'm live in Thailand and download in thai store only but i can not download in-app . My appleID name Cradit and user long time

Hi...
I cannot download in-app purchase . I'm live in Thailand and download in thai store only but i can not download in-app . My appleID name Cradit and user long time help me please . Thank you

What happens when you try?
Any info about your issue at all?

Windows Server 2012 R2 RDS + User profile Disks + App-V = Explorer.exe crashing all of the time

I have built a new RDS farm on Windows Server 2012 R2 with two Session Hosts and a combined Connect Broker/Web Access server. I had the farm up and running with User Profile Disks and all seemed OK. However, as soon as I installed the App-V 5.0 SP2 RDS
client on the session hosts, the explorer.exe process started crashing for any user logging in via the Web Access site. The process crashes and restarts every five to ten seconds. It's the same for administrators. If they log in via Web Access explorer.exe
crashes, but if they RDP directly to one of the session hosts explorer.exe is fine. If I reboot the session hosts, then the first user to log in via Web Access has a stable desktop session (and appears to have a new profile as well). However, if that user
logs out and back in again, explorer.exe starts crashing again. The only applications I have packaged at the moment are Office 2013 and Firefox.
I tried disabling User Profile Disks, but this caused a whole bunch of other problems and I eventually lost the ability to log in at all via Web Access (errors about the user profile service). As this is a small pre-production environment I completed scrapped
all of the servers and rebuilt from scratch. Again, everything appeared fine until I installed the App-V client, then explorer.exe started crashing repeatedly for all users.
Has anyone come across this issue before? I have tried installing the App-V 5.0 SP2 Hotfix Package 2, but this didn't help. I have read in a few forums that App-V doesn't work very well with User Profile Desks, but I have not heard of this particular issue.
Similarly, SP2 seems to have a lot of problems, so I am going to try removing App-V RDp Client SP2 and installing SP1. I ahev also deleted User Profile Disks for the test users to recreate their profiles, but this didn't help either.
Any other suggestions welcome!

I forgot to include the application event log entry for explorer.exe crashing:
Faulting application name: explorer.exe, version: 6.3.9600.17039, time stamp: 0x53156588
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532954fb
Exception code: 0xc06d007e
Fault offset: 0x0000000000005bf8
Faulting process id: 0xae8
Faulting application start time: 0x01cfab3a273787fd
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 69210d77-172d-11e4-80c6-0050560102d1
Faulting package full name:

What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

The question says it all:
What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
In the User Profile -> Permissions there is only the option for "Full Control".

Hi Nikolay,
Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

User Profile Disks and DFS replication

We're looking to replace a single, heavily used 2003 TS server--for performance, feature, and capacity reasons. Our users frequently have small amounts of data on their desktops/settings that we'd to persist between sessions, and they tend to have
long-running sessions (disconnecting and reconnecting while traveling, but not logging off--keeping open apps in the meantime).
The servers were originally purchased intending for 2008R2 SP1 remote desktops services, with lots of fast internal (RAID 5, 12x300GB 15K) storage. We're considering the option of using 2012 (virtual sessions, not virtual desktops) so that we can scale
out as we grow--and use the User Profile Disks.
Ideally, we'd like to maximize the usefulness of the purchased servers (and their internal storage), and not have to purchase additional hardware for shared storage--(iSCSI/External array that can be clustered). We're wondering if it's possible to pair
the User Profile Disks (UPD) with DFS replication (possibly over a dedicated NIC). Then, a user could log in to server X, connect to her local UPD (with the changes replicating to server Y's copy). If she disconnected/reconnected, the RD connection broker
would connect her to back to her existing session, and if she logs off and back on, she could connect to either server X or Y and it would all work. For maintenance, we'd be able to drainstop one server via the connection broker, perform the maintenance,
let DFS catch up, and then do the same on the second server.
Would something like this be possible? Or is it just asking for major problems?

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here
Cataleya Li
TechNet Community Support

MS14-022 and User Profile related issues

Hi all.
Since applying the patches in MS14-022 on Friday I've been having issues with certain aspects of two specific web applications.
Our intranet home page will not load and generates a large number of the following entries in the ULS log...
05/20/2014 07:53:36.54
w3wp.exe (0x146C)
0x1504
SharePoint Server
General
0
Medium
Constructed a new async cache named Profile Property Cache
0f15c23c-64b1-42bc-bdd8-f0a84cf358ba
05/20/2014 07:53:36.60
w3wp.exe (0x146C)
0x1504
SharePoint Portal Server
User Profiles
g11n
High
UserProfileApplicationProxy.InitializePropertyCache: System.Security.Cryptography.CryptographicException: Object already exists.       at Microsoft.Office.Server.UserProfiles.MossClientBase`1.ExecuteOnChannel(String operationName,
CodeBlock codeBlock)     at Microsoft.Office.Server.UserProfiles.ProfilePropertyServiceClient.ExecuteOnChannel(String operationName, CodeBlock codeBlock)     at Microsoft.Office.Server.UserProfiles.ProfilePropertyServiceClient.GetProfileProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.RefreshProperties(Guid applicationID)     at Microsoft.Office.Server.Utilities.SPAsyncCache`2.GetValueNow(K key)     at Microsoft.Office.Server.Utilities.SPAsyncCache`2.GetValue(K
key, Boolean asynchronous)     at Microsoft.Office.Server.Adminis...
0f15c23c-64b1-42bc-bdd8-f0a84cf358ba
05/20/2014 07:53:36.60*
w3wp.exe (0x146C)
0x1504
SharePoint Portal Server
User Profiles
g11n
High
...tration.UserProfileApplicationProxy.InitializePropertyCache()
0f15c23c-64b1-42bc-bdd8-f0a84cf358ba
05/20/2014 07:53:36.60
w3wp.exe (0x146C)
0x1504
SharePoint Portal Server
User Profiles
cm6y
High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: No User Profile Application available to service the request. Contact your farm administrator.
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext
serviceContext)
0f15c23c-64b1-42bc-bdd8-f0a84cf358ba
The same is logged when trying to view the PWA site of our Project Server 2010 web app.
All other web apps are responding as expected and, strangely enough, other pages and sites in the intranet and PWA Site Collections are fine too.
Has anyone any ideas as to why this problem exists and why only certain pages/sites are affected?
The User Profile Service is responding on all 4 servers in the farm and User Profile Sync's are running on time with no issues.
I've searched and found similar issues but there are no issues with our SharePoint Web Services site authentication settings which is proposed as a resolution in the following article even though our User Profile Services all seem fine...
http://blogs.technet.com/b/manjesh/archive/2011/02/06/sharepoint-2010-unable-to-start-the-user-profile-synchronization-service.aspx
Thanks in advance.

Try below:
http://torydouglas.com/?p=88
http://blogs.technet.com/b/steve_chen/archive/2010/10/13/troubleshooting-user-profile-sync-issues-on-sharepoint-2010.aspx
http://technet.microsoft.com/en-in/library/gg750254%28v=office.14%29.aspx
http://technet.microsoft.com/en-in/library/gg750257%28v=office.14%29.aspx

App-V 5 SP2 as RemoteApps and User Profile Disks with Error Error 0xc0000142

Similar Messages

Maybe you are looking for