App working fine in debug mode but not otherwise on iPad

Hi everyone,
Sorry if I am putting this question in wrong section, this seems to be the most relative location to ask question.
My Problem:
I have developed an app using Adobe Air and starling. App is working perfectly when I run on Flash Builder (debug and run both). When deploying on iPad at one particular location, it is either not getting TouchPhase.ENDED or some code is crashing.
I tried to debug while running app on iPad and its working absolutely fine. But when I create the ipa file normally i.e. without debug mode, at a particular location code is not working.
Please help me out in this regard, asap. I need to deliver it.
Please!!!!
Thanks
Waqar Iqbal

Hi,
I know one case, but don't know if have a solution.
See Registering Add-on in 2004
Best Regards.

Similar Messages

  • Oracle connection works in VB debug mode but not in EXE

    I have a small VB 6 app that writes to an oracle database on a unix server. Oracle 10g is installed on my pc. System DSN is set up in ODBC and corresponds to an entry in the tnsnames.ora file (to the best of my limited oracle knowledge..)
    The connection to the database works fine in debug bug. Test Connection of that DSN works as well. But when I build and execute the EXE file it returns : "TNS:could not resolve the connect identifier specified"
    What is different about the process of running an EXE that could cause this failure?

    I am having the exact same problem. What could be the difference in the way the debugger in VB handles DAO calls to an Oracle database in debug mode?!?!?

  • Scaling mobile app works fine on the X but not on the Y

    I originally made my app to work for iphone only but I am now scaling it to work on Ipad/ Android etc. I am doing all the scaling manually. It is a tabbed application.
    I am scaling all x and y locations and widths and heights by a scale factor that is created using..
              scaleFactorX = stage.width/320;
         scaleFactorY = stage.height/480;
    It works perfectly on the x but not quite enough on the y as objects look a little squashed vertically.
    I can't think why this is. If I were to alter the y scalefactor it would put things out when at the original phone size.
    The only part I'm not scaling manually is the actionBar and the bottom tabs. They are currently using default skins which use the DPI classification to determined size. I have however overridden this and set the action bar to use a skin with a much greater layoutContentGroupHeight. This hasn't however had any effect on the y scaling of objects in the main display area.
    The y scale isn't out by much, but it bothers me. If anyone has any suggestions I'd appreciate it.
    Thanks.

    Adobe won't fix it as long there are not enough votes for my bug report!!!!
    PLEASE VOTE: https://bugbase.adobe.com/index.cfm?event=bug&id=3376478

  • OSX Mountain Lion 10.8.4: imessage works fine in safe mode, but not in "normal" mode. Any hints?

    My iMessages does not work in "normal" startup, but it works perfectly in safe mode.
    Any hints?
    I have the same problem on a MacBook Pro 17" and on a MacAir 13" mid 2011.
    On my MacMini, iMessage work's fine.
    I'm using same apple ID on all 3 devices.
    Before update to 10.8.4, i had no problems.
    FaceTime also stopped working after update to 10.8.4.
    Thanks in Advance,
    Lars O.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Android App - works fine in Device Central but not in phone

    Greetings!
    Just looking for some general "you might try this" tips.  I've built a very basic game app for Android so I can start learning not only how to develop for Android, but also how to publish and distribute Android apps to users.
    My game works fine when I test in Device Central from Flash.  And I've been able to upload my app to the Android Market. But when I install and run on my Android phone (I've actually tested on two separate devices), I just get a light yellow screen with a series of tiny dots that move across the screen, almost like a loading indicator, but nothing happens after that.
    I've tried publishing as both an Air (Air 2) file and a Flash (Flash 10) file.  In device central, I tested the app on a Droid Incredible emulation.  The devices I've tested on are an HTC Inspire (AT&T) and an HTC Thunderbolt (Verizon).
    So, I know there's no way for someone to take my limited description above and say "this is your problem".  Again, I'm just hoping for some general tips along the lines of "try publishing in a different version of Flash".
    Any suggestions for where I should start digging? 
    Thanks in advance!
    Joel

    Sign out of the store on your phone, then sign back in. Note having content from more than one country's store may complicate the process of updating apps and downloading past purchases.
    tt2

  • BDC with call transaction VD02 works fin in A mode but not in N mode

    Hi All,
        I have BDC program developed in 4.6c using call transaction VD02 works fine with mode A but not with mode N.
    Now we upgraded to ECC 6.0.Do I need to change anything?

    No, you don't have to change anything for ECC. BTW, I wonder why VD02 is not working in the background for you?

  • C# SCOM SDK agent install works fine from debug mode but disconnects when built from installer

    My team is writing a C# application that installs SCOM agents on the fly. I used the code in :
    http://msdn.microsoft.com/en-us/library/hh329037.aspx
    as a template. Which works fine and will consistently install agents when I run it in debug from Visual Studio. But when I build an installer (using InstallShield), calls to:
    "AgentTaskResult results = adminServer.InstallAgents(agents, configuration);"
    always result in a Microsoft.EnterpriseManagement.Common.ServerDisconnectedException. The agent install even shows up in pending management on the SCOM server (but this sits in pending management forever and is never processed). Calling managementGroup.Reconnect();
    and retrying the agent install still results in a ServerDisconnectedException. The application has no problem doing other things with the managementGroup object (from debug or running from an installer). It can create MonitorConfigurationOverrides and
    gets events out of an outbound connector. So it seems like the disconnect problem is localized just to agent install requests.
    I looked in the Windows Event Log and found an OpsMgr SDK Service Error: 
    An exception was thrown while processing InstallAgents for session ID uuid:71d39b19-f9a7-4d4a-82ee-5043480af635;id=41.
     Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 778.
     Full Exception: System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 778.
       at System.Xml.XmlTextReaderImpl.Throw(Exception e)
       at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, StringBuilder internalSubsetBuilder, Int32& charCount, EntityType& entityType)
       at System.Xml.XmlTextReaderImpl.ParseCharRefInline(Int32 startPos, Int32& charCount, EntityType& entityType)
       at System.Xml.XmlTextReaderImpl.ParseText(Int32& startPos, Int32& endPos, Int32& outOrChars)
       at System.Xml.XmlTextReaderImpl.ParseText()
       at System.Xml.XmlTextReaderImpl.ParseElementContent()
       at System.Xml.XmlReader.ReadString()
       at System.Xml.XmlReader.ReadElementString(String name)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.CreateRemoteJobXml(JobDefinition jobDefinition, ManagementPackTask task, Guid hsId)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.SubmitJobs(IList`1 jobDefinitions, Guid batchId, JobCategory category)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.SubmitTasksInternal(IList`1 jobDefinitions, Guid batchId, JobCategory category, PrepareResultSet prepareTaskResultCallback)
       at Microsoft.EnterpriseManagement.ServiceDataLayer.AdministrationService.InstallAgents(Guid batchId, IList`1 jobDefinitions)

    Hello,
    You might ask in the
    Visual C# Language forum on MSDN.
    Otherwise, perhaps the Operations Manager - Extensibility forum:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=operationsmanagerextensibility
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • App working fine on all emulators but not on real devices

    hi, i made a 3d scene using height map it worked perfect on sun emulator but did not work on real device Nokia 6280 and instead said nullpointer exception there is no err with jar file or any other small error.
    When i run that same application on sonyerricson emulator then it did not show anything at all just blank screen on all phone of sony erricson
    plz help me regarding this issue
    thanks
    bye

    hi,
    can u describe more detail about your application.I think you are using any API that is not implemented on real device.

  • Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

    hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
    my problem is
    imac works fine in safe mode,
    but when you try to startup normal it's connstantly restart by it self.

    in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't  see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

  • How do I send group emails from my iPad? They work fine from my MacBook but not the iPad.

    How do I send group emails from an iPad? They work fine on my MacBook but not my iPad.

    You need a third party app to do that. Look at Mail Shot or Group Email in the app store. You cannot do it with the built in mail app and the contacts app in iOS 5 without a third party app.

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    Question
    WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

  • My apple extreme wireless network is working fine with the macs but ios devices (iPhone & iPad) will not connect. I can see the network though. Everything was working until the ISP went down. Any suggestions?

    My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?

    Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
    What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices.

  • Procedure works in debug mode but not normally

    I'm scratching my head on this and would appreciate any help as to what is happening.
    We have client code that calls stored procedures on an Oracle 10g database. When I run it normally the procedure does not behave as expected. If I try to debug the code it works fine on client until I recompile the procedure again. I don't have the faintest idea why this happens but I'm not sure how to make it work correctly without putting it in debug mode.
    If anybody has any idea what may be occurring I would appreciate the help.

    hmmm, I'm not sure how to do that.
    I do a select against a table into collection then loop the collection as follows:
              FOR Indx IN 1 .. v_Probs_Desc.COUNT
              LOOP
                   v_MyClob := v_MyClob || v_Probs_Desc(Indx);
              END LOOP;
    do some formatting by removing some tags embedded in the text
              v_MyClob := REGEXP_REPLACE(v_MyClob,'<GMT[[:print:]]*:','');
              v_MyClob := REGEXP_REPLACE(v_MyClob,'<GMT[[:print:]]*GMT>','');
              v_MyClob := REGEXP_REPLACE(v_MyClob,'<MAILTO[[:print:]]*MAILTO>','');
              v_MyClob := REPLACE(v_MyClob, '<PERSON', '');
              v_MyClob := REPLACE(v_MyClob, 'PERSON>', '');
              v_MyClob := REPLACE(v_MyClob, chr(13), chr(10));
    Find position of the heading if found (case-insensitive).
              v_End := REGEXP_INSTR(v_MyClob, 'Steps to Reproduce([:punct:])?'||chr(10)||'|Steps([:punct:])?'||chr(10),1,1,0,'i');
              IF ( v_End = 0 ) THEN
                   v_End := LENGTH(v_MyClob);
                   v_Flag := 1;
              END IF;
              IF ( LENGTH(SUBSTR(v_MyClob, 1, v_End)) > 4000 ) THEN
                   v_Text := SUBSTR(v_MyClob, 1, 4000);
              ELSE
                   v_Text := SUBSTR(v_MyClob, 1, v_End);
              END IF;
    --Remove any spaces or newlines from the beginning
              v_Wspace := ASCII(SUBSTR(v_Text, 1, 1));
              WHILE ((( v_Wspace = 10 ) OR ( v_Wspace = 32 )) AND ( LENGTH(v_Text) > 0 ))
              LOOP
                   v_Text := SUBSTR(v_Text, 2, LENGTH(v_Text));
                   v_Wspace := ASCII(SUBSTR(v_Text, 1, 1));
              END LOOP;
    Make sure that the text is less than 4000 bytes so it can be inserted into another table.
              SELECT VSIZE(v_Text)
              INTO v_Size
              FROM DUAL;
              IF ( v_Size > 3950 ) THEN
                   v_Text := 'Created from ' || v_p2t(indx).PROBLEM_ID || '>' || chr(10) || chr(10) || SUBSTRB(v_Text, 1, 3950) || ' ... ';
              ELSE
                   v_Text := 'Created from ' || v_p2t(indx).PROBLEM_ID || '>' || chr(10) || chr(10) || v_Text;
              END IF;
    there's other code but the above code snippet doesn't work outside of debug mode.
    Edited by: dtjasonb on Oct 13, 2009 10:27 AM

  • MySQL query works fine for Debug mode not during regular run mode

    Hello fellow Java gurus,
    I'm very much confused at the moment. I have an Java application that populates and accesses a MySQL database. It's a little complicated to explain but basically I've got a few threads that manipulate it. The database itself can handle multiple client connections.
    Now, my first SQL query determines whether records exist within a particular timeframe, since one of my columns is a time of arrival (toa). This works fine in debug and normal run mode. My second SQL query is only executed once the first query returns true, which occurs 100% of the time. The second query is very similar, however, has the very weird behaviour of working the way I want it during debugging mode, but doesn't work at all during normal run mode. I really do not understand. I've tried running the 2nd query using the same connection and also a different connection as to the 1st query but it really doesn't make a difference to the non-working outcome.
    If anyone has any ideas as to as to why this is happening, please help me. Any feedback would be greatly appreciated. I am desperate at the moment.
    Kind regards,
    Mitch.

    Sorry everyone, I've been able to solve it. My boolean variables were being set to their opposite values! Silly me.... cheers anyway....

Maybe you are looking for