App works differently when connected to two very similar databases

Hi,
I have a simple oracle forms application that runs oracle reports. I also have two very similar datasbes one is for a test envrionment and the other is for a conversion environment. I have been connecting to the test one from the start but recently have tried connecting to the conversion environment.
Some of the reports return blank results from the conversion environment that returned values in the test environment. when I run the queries from the reports in the conversion envronment in SQLPLUS they return the same values as the test environment. Does anyone know why this might be happening?
Gerald

I ran this report from the reports builder application.
the report only gets two parameters passed to it. I ran it connecting to database one and database two for exatly the same report. Database one works fine but database two says that there is a problem with the paramaters passed to the report.
Is it something with the system parameters and how they are getting passed to the report, is there something that I need to set up on database two regarding the reports server setup?

Similar Messages

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the

i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help please

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

MacBook Pro is no longer working properly when connected to external monitor, help!

My macbookpro has started giving me blue screen issues when connected to my external monitor. It was working fine but now makes the computer unusable when connected. Using i-wire lead from thunderbolt to hdmi on monitor. Monitor works fine when connected to old HP notebook using HDMI lead so monitor not faulty. What has changed on my mac to cause this?

You can change your password to avoid the "L" and you can take your machine into Apple for a keyboard replacement, free under AppleCare/warranty.
See #6 here
..Step by Step to fix your Mac
and if your on 10.6 and no boot disks
Snow Leopard 10.6 password reset, no disk method
Also backup your data first
Most commonly used backup methods
How do I securely delete data from the machine?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

Your warranty includes 90 days of phone support. Contact Apple.

TableView LINEEDIT works differently when viewed through Portal

I have a simple table with a few columns of data that I display and allow the user to change a row using the selectionMode = "lineedit". The columns are all controlled using htmlb tableViewColumns.
When I test my application from the WebAs the table looks fine. If a user selects a row they can see the entire amount of text that appears in a column they want to change
However, when the BSP comes up in our SAP portal and the user selects a row only the first 20 (or so) characters can be seen and the user must use the arrows keys to get to the part of the text they wish to change. Is this a setting somewhere?

For the <htmlb:inputField> look at attributes maxlength, size and width.
width: Determines the text width for the input field. We recommend that you use the size attribute instead of width.
size: Determines the size of the input field.
maxLength: Maximum length of the user input.
I must admit that this documentation is not tell me enough. Will ask on Monday about this.
As for your remark "works differently when viewed through Portal": You keep in mind that once a BSP application is running with the portal, all stylesheets (*.CSS) files are loaded from the portal server, and not the webAS.
Now it could happen that you are running an EP and an older (or incompatible) patch level than your BSP stylesheets are at the moment. For EP6, starting from what I remember at SP11, there is planned a technique to install the latest stylesheets from service market place. You ask about this via OSS, queue EP-PIN-?-STY (something like this).

HT204266 App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop

App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop. Need help!!

For the App Store icon check Settings>General>Restrictions. You may have restricted the installing of apps and the icon will disappear.
If that's not it, swipe from screen to screen as you may have moved the icon.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.
More information is needed about the apps not syncing or downloading. Are you signed into the same ID on the iPad as your are using in iTunes on your computer and are you talking about iTunes on the computer being the problem?

MyRIO standalone application not working, but works well when connected to PC (NI vision + webcam)

Hi,
I have a program that can detect motion that occurs in my room using a webcam and will send a picture to my gmail account if motion detected. The program works fine when myRIO is connecting to PC (with the webcam connects to myRIO). However, after I created a standalone application, it's not working. Even the VIs within the first frame of the flat sequence (turn LED on) was not working. The standalone program will work if I disable all of the vision-related VIs. Any suggestions? Thanks!
I got the driver installed and the webcam connected, so that shouldn't be an issue.
Thanks in advance.
-Robin

I have a 30 GB version of the same. I also got some external speakers for it, UBL I think they are called. I find there is something very odd about whether you charge it up or not. It seems to over-charge sometimes, and then everything freezes. As for connecting to the PC, no chance. After an initial burst on another machine, and after installing itunes on this computer, there is no recognition of the one by the other at all. Plus freezing and locking up. Plus freezing the PC as well, it is very tedious. So no answers, only commiserations. I think Apple are doing a very poor job on this ! And their help facility seems quite hopeless !

How do i prevent removed apps from syncing when connecting to iTunes

I've "removed" apps from my iPad to free up space but when I connect to my computer, the apps "appear" to still sync.
To the upper right of the screen, it will show there are 65 apps (I removed 20 apps). These are active apps and that is correct When I click on the status bar at the bottom of the screen (the Apps section), it shows there are 85 apps taking up space on my iPad.
Also, where the apps are listed, the apps that were "removed" from my iPad air have an option to "Install". I don't understand why they're still syncing. TIA for your help!

This does not help but it does offer some insight. I have NEVER noticed this before. Take a look at the dialog box in the is screenshot. Note that it says that even if the app is deleted from the iTunes library, it will not be removed for any iOS devices when you sync.
As an experiment, I deleted the AOL On app from my iTunes library and followed the prompts to put the app in the trash - not keep it in the mobile sync folder. I synced my iPad - and the app is still on the device even though it does NOT appear in my list of apps in iTunes when the iPad is connected and selected. I have never seen that happen before.
If the app is not in your library, I always assumed that it would be erased when you sync since it is no longer in iTunes. I deleted the app in iTunes and then deleted it on the iPad and then synced again and now it is gone everywhere.
Bizarre....

Apple TV3 not working - Can not connect to iTunes, Very, very slow streaming. Help please?

For just over a week I have been unable to stream film/TV shows from Netflix via my Apple TV. When I have been able to, the streaming is painfully slow... for example, to watch a half hour program I have had to pause it at the beginning and leave it for 30-40mins before I can watch it and even then i'm not guaranteed to be able to watch it all! On top of the streaming issues, I tried to purchase a film from iTunes via the Apple TV - this took 3days to download!! Then finally, last night, it all seemed to stop working - will not connect to iTunes account at all (can not connect to server). I have checked again this morning and the error message says the same thing. My internet connection is fine (perfect on both mac, dell laptop and iPhone. I have tried the obvious troubleshooting methods - nothing has helped.
Can anyone please tell me whether this is an internal Apple issue and if we know how and when this will be resolved? Or has anyone else had the same problems and been able to resolve them?
I'm pulling my hair out...

This would be an issue with your network. Netflix will constantly adapt to your connection. iTunes content is fixed, will cache as you watch, and will need to load a portion before playback begins. As you have not provided information on what you have tried, I will list common things to check.
What is your current connection, via speedtest.net
Make sure DNS is set to auto (settings - general - network)
Make sure router is up to date, if on wifi try ethernet
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise

Flex app behaves differently when Adobe automation files loaded

We have an application built with Flex 3.1. I am attempting to create QTP tests for this application. The instrumentation files are loaded at run time, not compiled into the application.
I am using QTP 9.5 with the Adobe Flex Add-in 3.0. I am able to see the controls an run tests to some extent.
The main issue I am trying to resolve is that there is a difference in behavior of the application when it is started with the instrumentation files. The differences occur both inside and outside of the QTP environment.
The observed differences are:
The initial page is a login screen. After entering the id and password, I can click ‘Enter’ or click the “Log in” command button. With the instrumentation files loaded, the ‘Enter’ key no longer works.
When I log out of the application, a progress screen displays while the environment clean-up occurs. When the progress bar hits 100%, the original login screen is displayed. With instrumentation files loaded, activity stops when the progress bar hits 100% and the original login screen is never displayed.
After logging in, a window with perspective tabs displays. Each perspective tab page contains a window containing a list of resource associated with the perspective. When instrumentation files are loaded, the tab pages exist, but the perspective windows are not created.
I realize I am dealing with application-specific behavior here and I am pursuing this with our developers. What I am looking for is any information related to differences in application behavior when instrumentation files are loaded.

I can't seem to reproduce what you are seeing with this sample application:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark">
 <s:states>
 <s:State name="state1" />
 <s:State name="state2" />
 </s:states>
 <s:controlBarContent>
 <s:Button label="change state" click="currentState=currentState=='state1'?'state2':'state1'" />
 </s:controlBarContent>
 <s:Button x="50" y="50" label.state1="state1" label.state2="state2" skinClass="CustomButtonSkin" />
</s:Application>
Can you provide a similar sample application that demonstrates the issue?

Connection between two SQL Azure Databases

We have a requirement to move data (partial data in a table based on policy conditions) between two SQL Azure Databases. Want to know the best possible way to do this.
We are not looking at Data Sync Framework - as this is only a Preview version and we have to use this in an ongoing basis in Production and the volume of data is quite high.
The option that we have currently is to use an on premise stored procedure - that will have two link servers to the source and target SQL Azure Databases and do the data movement in one transaction.
Are there any other better options to do this ? Any pointers will be helpful.

Hi Kothai Ramanathan,
According to your description, if you just want to moving part of the data from a huge table between two different SQL Server database, you can use
SQL Server replication to sync the part of data via articles. However, in SQL Azure database, it does not support SQL Server replication, if you want to migrate database, as other post, you
can use Data-Tier Application Import and Export or other ways.
In addition, for just moving the part of data, you can also create two Linked Servers between local SQL Server database and two different SQL azure database. For example, you can get the changed data from the first Linked
Server and saved the data to Local database, then insert these data to the other azure database via the second Linked Server.
For more information, see:
http://azure.microsoft.com/blog/2012/09/19/announcing-updates-to-windows-azure-sql-database/
http://blogs.msdn.com/b/sqlcat/archive/2011/03/08/linked-servers-to-sql-azure.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

Blank Pale Screen, computer works fine when connected to external vid

My powerbook has been working fine, though I've been living in a very hot place so it has been subjected to extreme heat at times. One day, put it to sleep before a meeting, when I opened it to wake it up, it showed only a blank greyish/white/pale blueish screen. I rebooted, same thing. The computer makes the startup chime, the caps lock, volume and even brightness keys all work, there is just no image. When it should be showing the apple startup logo, the screen is slightly paler with really faint white lines running along center right. When it should be showing the desktop, it is blank with a small circle of slightly brighter light in the upper right hand. Connected it to an external monitor and was able to get my data off and work on it just fine. A week later, still no change to display. What's wrong? What can I do? (This computer is obviously outside of warranty and apple care as it was purchased in 2005)

Your video cable or your LCD panel has failed. If there is no change in what appears on the screen when you change its tilt angle, the LCD is probably at fault. If changing the screen's angle causes any change in the displayed image, the fault is probably in the cable. Apple's response to either fault would be to replace the entire display assembly, which includes the cable. That would cost a great deal — probably more than the machine is worth in good working condition. You could buy a good used display and install it yourself for less, if you're up for a DIY challenge:
http://www.ifixit.com/Guide/Browse/PowerBook
If you're not, you may want to start looking for another machine.

C# app throws error when connecting to indesign server

It throws this exception:
Invalid syntax (Exception from HRESULT: 0x800401E4 (MK_E_SYNTAX))
at System.Runtime.InteropServices.Marshal.MkParseDisplayName(IBindCtx pbc, String szUserName, UInt32& pchEaten, IMoniker& ppmk)
at System.Runtime.InteropServices.Marshal.BindToMoniker(String monikerName)
Caused by this line:
InDesignServer.Application app = (InDesignServer.Application)(System.Runtime.InteropServices.Marshal.BindToMoniker("config uration_noport"));
The server is successfully running with the no configuration parameters therefore the configuration name by default should be "configuration_noport".
Any idea why it's throwing this error? This is a C# 4.0 console application connecting to Indesign Server CS 5 (7.0).

Can anyone from Adobe please offer some more insight on this matter? I have encountered the excact same issues and not been able to find any answers or clues.
Test Steps involved:
- start a named indesign server instance in a cmd using: indesignserver -configuration testServer (and seeing that it's using 'testServer' when starting up)
- running a sample using BindtoMoniker() always works using VS and the built-in dev WebServer and connects to my named instance 'testServer' but never with IIS.
- tried to grant as much as possible to IIS pool identity, DCOM settings etc...no luck
- impersonating as Admin in code and making sure the current thread is authenticated, no luck
- all I can is to fire up new COM instances with IIS using the new:... syntax but not get the named one

App works differently when connected to two very similar databases

Similar Messages

Maybe you are looking for