Appalling handling of VC025 by BT - absolute nonse...

I join the many legions complaining of the VC025 error - but need to vent spleen as I got it after watching 75 mins of the Spurs-Chelsea match! And couldn't reconnect....
Any talk about it being a problem with which browser you use, which version of Silverlight etc are clearly red herrings! I had after a great deal of frustration got a combination of Windows 7, Firefox and Silverlight that had worked without problem for several broadcasts. And this time it failed mid-broadcast!
Trying page refresh, logout and login and even relaunching the browser after clearing history had no effect. I am therefore sure that thoUGH these may work occasionally - THE PROBLEM IS ONE OF CONNECTIVITY TO THE BT SPORT BROADCAST - and those actions merely force reconnects which sometimes manage to solve the connectivity problem.
There are clearly still appalling technical issues. The Windows XP I have hooked to my TV can never connect, whatever combination of browser and cache-clearance that I try. The Windows 7 machine I was using successfully in Firefox always gets VC019 errors in Chrome, again irresepctive of cache clearance etc.
BT's online technology is clearly flaky. If they had put some of the massive marketing money into getting the technology right they wouldn't have these boards full of complaints.
An appalling service from a so-called technology giant...

Hi Forum.
First I find I have CORRUPT user id so registered again, as support could not fix it hope they don't charge me twice now VC025 errors refresh page as suggested login logout still no joy are all browsers supported if not which should I use? Is BT Sport still in Beta testing or am I right to think it is live? This product is not fit for purpose!
Using Windows 8.1 and have Firefox Chrome and IE11 installed.
Yours Faithfully. Mr C E Elston.

Similar Messages

Two 24" LCD Monitors with FCP / Motion

I have a Mac Pro (early 2009) with the new ATI Radeon 4890 dual DVI video card and one Apple 24" LCD monitor. I'm using this setup for primarily FCP/Motion work. Question:
- Can the ATI Radeon 4890 handle two 24" LCD monitors, or do I need to purchase a second video card?
- Can FCP / Motion handle two video cards?
Thanks!
lance

Can the ATI Radeon 4890 handle two 24" LCD monitors
ABSOLUTELY. There are two monitor connections on the card. One DVI, the other the Apple connector.
Can FCP / Motion handle two video cards?
Yup. Most FCP workstations I have been on, and personally own, are two monitor setups. That is a fairly typical setup.
Shane

Mixing of interactive report and classic report fails the RESET PAGINATION process.

I have a tab page where i got 3 different reports REPORT_A (classic), REPORT_B(interactive) and REPORT_C (CLASSIC) in the same alphabetic order. I have a reset pagination page process which will always fire (without any condition) when you visit the page via tab.
The reset pagination process which exists in the before header stage is firing but not resetting the interactive report. It does affect the subsequent classic report REPORT_C as well. The REPORT_A would reset pagination fine since it exists before the interactive report. Is this a know bug in apex?
I created a test demo application with exact steps to reproduce the problem. The steps are in the demo website itself.
http://apex.oracle.com/pls/apex/f?p=56638
U: testuser
P: password
Apex Version: 4.2.4.00.08
In my real application i would have a dropdownlist in the page based on which I would filter the data. The dropdownlist will have a corresponding after-submit branch which will handle the reset pagination & RIR absolutely fine. But when we visit the website through tab the above problem would crash the page.
I tried solutions like gReport.search('SEARCH') but that will fix only the interactive report, not the classic REPORT_C. That is just a hack anyway.
Any ideas.?

Ramani_vadakadu wrote:
in classic report pagination need to be make it up max rows in APEX_SCHEMA(APEX_040200) itself. i was fixed this issue long back myself,but right now i don't remember which table! so please check the schema and track it.
This makes very little sense to me. Please explain this in detail. Are you advocating making changes to APEX metadata by executing DML on tables in the APEX_040200 schema? Doing so will leave your APEX instance in an unsupported an possibly inoperable state.

Spry validation onblur

Hello, is it possible to use onblur in a spry validation text field? I want to use spry to validate text field input to be required and 4 to 32 chars long but i want on blur to make ajax request to check if the username is available (this is for registration form). However if i use onblur="check_username(this.value)" it does not trigger the onblur event at all.

Strange this does not work correct. I even tried with the click event to be sure. Below is my code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title></title>
<link rel="stylesheet" type="text/css" href="style.css" />
</head><script src="../SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css">
<body>
<form method="post">
     <table border="0" cellpadding="0" cellspacing="0" width="100%" class="cool-table">
          <tr>
               <td>Username:</td>
               <td><span id="sprytextfield1">
               <input type="text" name="username" id="username" />
               <br><span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldMinCharsMsg">4 characters minimum.</span><span class="textfieldMaxCharsMsg">32 characters maximum.</span></span></td>
          </tr>
          <tr>
               <td colspan="2" align="center"><input type="submit" value="Login" /></td>
          </tr>
     </table>
</form>
<script type="text/javascript">

</script>
</body>
</html>
When i load the page in browser with this code it displays alert box with empty message (because username value is empty) immediately after page load, and never displays a thing when i click the text field.
If i use
Spry.Widget.Utils.addEventListener("username", "click", check_username, false);
without parentheses after the handler function name it does absolutely nothing on click too. Any idea?
I even noticed error in Adobe documnet located at http://labs.adobe.com/technologies/spry/articles/data_api/apis/utils.html#addeventlistener
In the example it says
<script type="text/javascript>
But must be
<script type="text/javascript">

Coldfusion and jquery drag and drop ...

I am tring to create div by looping cfquery and assign them with #id# as id if I do inthis way drag and drop does not work, if i give div a id i am able to drag only first div box not all div boxes any suggestion below is the code I am using
<script type="text/javascript">
$(function(){
// TOGGLE SECTIONS ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$('h1').bind('click',function(){
$( this ).next('.section')
   .slideToggle();
}).eq(0).trigger('click');
// DEMO FIVE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$('#demo5_box')
.bind('dragstart',function( event ){
   if ( !$(event.target).is('.handle') ) return false;
   $( this ).addClass('active');
.bind('drag',function( event ){
   $( this ).css({
    top: event.offsetY,
    left: event.offsetX
.bind('dragend',function( event ){
   $( this ).removeClass('active');
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
}); // doc.ready
</script>
<style>
.handle {
cursor: move;
.box {
position: absolute;
height: 25px;
width: 88%;
background: #CCF;
border: 1px solid #AAD;
text-align: center;
font-size: 12px;
</style>
<cfif q.recordcount GT 0>
<cfoutput query="q">
<div id="demo5_box" class="box" align="center">
<div class="handle bar" onMouseUp="resort();">.handle</div>
#evt#
</div>
</cfoutput>
</cfif>
basing on move event I am calling a cfc to update database but I am unable to catputre the values any help?

More information would be great.
What type of site is it? WordPress? Joomla or Drupal?
What drag and drop theme or framwork are you using?
What version of software and theme, what type of hosting, what version of PHP and mySQL?
I'm having similar issues but details such as these will go a long way to grouping symptoms and getting to the bottom of the problem(s).
One thing I've noted is that in most cases everything is actually working. It's just taking an unbelievably long time. jQuery isn't the problem either. It seems more closely related to the quantity of available tasks on a given page.
There are forum posts for v7 that say Safari isn't compatible with WordPress for example. It is compatible and works just fine, but if you're running the latest version of Catalist Theme and their Dynamic Site Builder you can't do anything with Dynamic admin because all its options are on a single page which appears to be too much for Safari 7 to handle for some reason. Folks are having similar problems with Genesis, Headway Theme, Pagelines and many others.

Will an iMac G4 support a newer OS than Jaguar?

I am asking for a little bit of advise and opinions if possible.
I have to opportunity to buy a G4 pretty cheaply and I just want to know if it is a good deal and worth the money. My current laptop is very very old and very very tired and no longer copes with much.
The Mac currently has Jaguar on it, my plan would be to eventually buy one of the mini's and use the G4 as a screen. However, having done a wee bit of research I was wondering if the G4 would have the capability to update to something more recent than Jaguar?
And also is it worth it? I would basically be replacing my aging laptop with a Mac which is not spritely and I am not sure what to do.

If it has a 700 or 800 mHz processor, it can run up to OS 10.4.11 "Tiger." If the processor is 1.0Ghz or faster it can run up to OS 10.5.8 "Leopard."
And also is it worth it?
Depends. If you are trying to improve your web experience, likely not. Many websites now use technologies that stopped supporting Macs made before the change to Intel processors in 2006.
Caveats:
1) Legitimate retail install disks of OS10.4 and 10.5 are hard to come by, so much so that some sellers are demanding twice the original price of US$129, making it more costly than many used G4 iMacs.
2) The first G4 iMacs did not have DVD-capable optical drives, but the OS versions I mentioned come on DVD. That does not mean they can't be installed but complicates installation.
3) If the computer can use Leopard 10.5, it will need all the RAM you can put in it. Early G4 iMacs can handle only 1GB RAM, the absolute min for 10.5 to be happy. Later models could take up to 2GB RAM. However, regardless of model, fully upgrading the RAM on a G4 iMac is not a trivial matter. You can get to half the RAM slots, ones to which Apple wants you to have access. Getting to the other half requires a serious teardown of the computer that, if not properly executed, can cause the computer to overheat with the possibility of fatal damage.
If you like the styling of the G4 iMac over performance, by all means go for it. I also think they are a very cool computer. However, if you need performance, especially with web browsing, find a lightly-used Intel Mac of some flavor.

Oddities when serving images via NES from a servlet that is part of a WAR

Just wanted to confirm that the following behavior is normal:
          Environment:
          NT 4.0 SP5
          NES 3.6 SP3
          WLS 5.1 SP3
          jdk 1.2.2
          Goal: When constructing a page that has images embedded in it from my
          servlet, I would like NES to serve the images.
          I've found out that I've to refer to my images with an absolute URL that
          maps to the images directory under Netscape's document root. If I refer to
          my image with a relative URL (request.getContextPath() +
          "/images/cookie.jpg"), then WebLogic tries to retrieve the image from the
          WAR. What is interesting is if I use relative references to images within my
          servlet (minus the WAR, i.e. with the servlet registered in
          weblogic.properties), I see that the image is being served by Netscape.
          Why does the WAR require absolute references to images and the previous
          mechanism does not? Is this behavior consistent with the spec? How are you
          guys handling this (are you using absolute references to static content when
          using WAR?)?
          I'm really baffled by this and wanted to see how others view this. Any
          comments/feedback will be much appreciated.
          Thanks,
          Sanjiv


Hi Cameron,
          You are right but see my "Goal" below. I want to serve my images from my web
          server and NOT by WebLogic. Anyway, I spent too much time on this and found
          out that I was getting inconsistent results during testing different
          approaches because I was not restarting my web server. Once I became
          consistent in restarting my web server and closing all browser windows
          before each test, I got consistent results. So, here's what works for me:
          If I want to have my JSPs/servlets running in WLS to serve images that are
          included in their output from my web server, then I've to use absolute URLs.
          An example would be:
          img src="/images/a.gif"
          On the other hand if I use relative paths like img src="images/a.gif", then
          the browser request for the image is sent to WebLogic, which then looks for
          the image in the WAR (as it should).
          All of this might be common knowledge to most folks but not me.
          Thanks,
          Sanjiv
          Cameron Purdy <[email protected]> wrote in message
          news:[email protected]...
          > The WAR does not require absolute paths. Your JSP must be served from a
          URL
          > that, when combined with a relative path, actually specifies an image in
          the
          > WAR.
          >
          > Cameron Purdy, LiveWater
          >
          > "Sanjiv Gulati" <[email protected]> wrote in message
          > news:[email protected]...
          > > Just wanted to confirm that the following behavior is normal:
          > >
          > > Environment:
          > > NT 4.0 SP5
          > > NES 3.6 SP3
          > > WLS 5.1 SP3
          > > jdk 1.2.2
          > >
          > > Goal: When constructing a page that has images embedded in it from my
          > > servlet, I would like NES to serve the images.
          > >
          > > I've found out that I've to refer to my images with an absolute URL that
          > > maps to the images directory under Netscape's document root. If I refer
          to
          > > my image with a relative URL (request.getContextPath() +
          > > "/images/cookie.jpg"), then WebLogic tries to retrieve the image from
          the
          > > WAR. What is interesting is if I use relative references to images
          within
          > my
          > > servlet (minus the WAR, i.e. with the servlet registered in
          > > weblogic.properties), I see that the image is being served by Netscape.
          > >
          > > Why does the WAR require absolute references to images and the previous
          > > mechanism does not? Is this behavior consistent with the spec? How are
          you
          > > guys handling this (are you using absolute references to static content
          > when
          > > using WAR?)?
          > >
          > > I'm really baffled by this and wanted to see how others view this. Any
          > > comments/feedback will be much appreciated.
          > >
          > > Thanks,
          > > Sanjiv
          > >
          > >
          >
          >

IPhoto 08 buggy on iMac G5?

I have just installed iPhoto 08 on my iMac G5. I installed it 'over' the previous installation of iPhoto 6.
What happens is this: I open a photo, experiment with some edits using the Adjust palette sliders, then zoom in by using the slider at the bottom right of the screen. At this point, the beachball starts to spin.
Either the screen takes a long time to refresh (ie very slow response) OR the beachball will spin and spin and spin, with no other option than to Force Quit.
I checked out the Activity Monitor whilst the iPhoto 08 app was hanging and the processor was running flat out.
I have an iMac G5 1.9mhz processor and 1GB of RAM. Photoshop CS3 runs like a dream on this machine, as does iPhoto 6.
Today at the Apple Store I tried out one of the new iMacs, running the very same commands on a high res image, then zoomed in, and was very fast, it could handle the same commands with absolutely no lags, no delays. iPhoto 08 runs very well on the latest machines.
Could it be that my iMac G5 is just too low spec to run iPhoto 08, or could there be a bug in the program? It seems to happen particularly when applying the sharpening and noise reduction commands, and then zooming in afterwards.
I'm also concerned that my iPhoto Library will no longer be readable if I go back to iPhoto 6, there was a warning when I first started the app for the first time that the library would no longer be readable by earlier versions of iPhoto.

For me the latest update has make linking to iTunes for a slideshow an excruciatingly slow operation, sometimes up to 1 minute. This is on a G5. All the other aspects of iPhoto are working for me. It's a direct result of the iLife 08 updater. Going back to iPhoto 7.0.1 or 2 does not speed it up so the problem seems to be outside iPhoto.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. iPhoto doesn't not have to be closed to run it, just idle.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

InDesign CS5 Crashes when packaging

I am repeatedly getting the spinning rainbow with InDesign "not responding" when I try to package files for printing. Yes, they are fairly large, but CS4 handled files like this with absolutely no problem. I have checked the fonts, even purchasing a new set to replace a .ttf that I was using in the documents. Why would CS5 have trouble with something like this when CS4 handled it routinely. This is becoming a very serious problem. I would jump back to CS4, but I have misplaced the disks and
iMac 2.93GHz Intel Quad-Core i7, 27-inch - 16GB DDR3 RAM (just purchased to replace an older iMac that I thought might be the problem)
OSX 10.6.6
InDesign CS5 ver. 7.0.3.535

ezwind70 wrote:
I am having the same issue. Personally, I feel it should work without having
to go through all the steps mentioned above.
You are absolutely correct, it should. If it doesn't, it means there is something wrong with your file, not ID in general. If going through the steps fixes the file, consider yourself lucky you don't need to rebuild.
You didn't mention the version of ID that you are using, but make sure you have applied the latest patches. There were some issues with packaging (though I don't recall hangs as being one of them) in 7.0.0

Identity based firewall - how to ignor a username

I have set up an identity based firewall configuration.
This all seems to work quite well, some issues still arise however:
policies with usergroups containing spaces (i.e. "Domain Users") are not correctly handled;
it seems that a process / service account or whatever running on a workstation and firing a kerberos ticket request deletes the ip - user mapping that was recorded for the user logging in.
The group names can be handled, but it would be absolutely great to find a way to ignore certain usernames in the ip-user mappings. For instance "Administrator" or "epo_service_account"
Does anyone know how to arrange this?
Thanks,
Bas

Hi Frank,
Thanks a lot for your answer. Just one more easy question: what I need to do is a custom Authentication Module (which will read the cookie)? If only you can point me to the correct chapter of the WLS documentation I'll be very pleased.
In future releases of JDeveloper will be easier to do this kind of things related to security?
Riveck

HEX 0x8BBB0011 The connection to the server was disconnected

Hi,
I am using a Network shared variable to control a Loop in FPGA in cRIO 9073. For the past 1 month the program was runing without any issue but suddenly the VI stopped thrwoing an error
"HEX 0x8BBB0011 The connection to the server was disconnected
The error or warning occureed while writing the following shared variable
\\NW-cRio\NW Library\NW_Force_cal
\\169.254.106.130\NW Library\NW_Force_cal"
A screen shot of the VI is attached, the NW_Force_cal is highlighted.
After the VI was closed and rerun the VI resumed running without issues. This kind of unpredictable behaviour is very difficult to handle, I lost real time data recording for 12 hours because of this issue.
Please suggest a solution for this issue.
Thanks
Mukunda
Solved!
Go to Solution.
Attachments:
Vi.png ‏120 KB

The error explained the issue. The network had problems that led to the server being disconnected. The way to fix this problem is to understand what is meant by "real-time." This is just another way to describe deterministic computing. That is, the program guarantees everything will happen within a predetermined period. In order for things to be deterministic, they must be controllable. The most obvious way to break determinism is to prompt the user for input. As we clearly cannot guarantee the user will reply within a certain period, we can no longer call the program deterministic. In this case, we have a more subtle break of determinism. Relying solely on a network will break the determinism. There simply isn't a way to guarantee the network won't get hit harder than usual. In this case, the network was down for a period of time long enough to throw an error.
Here's where we can look to fix things. After the error was thrown, what did the code do with it? The error wire isn't used for anything. I would expect it to throw an error and halt the program. This clearly isn't the behavior you want. So, why aren't we using the wire for some error handling? In the case of an error, you can log the data locally. When you regain the network, you can dump the log back to the host PC you typically use for your data collection. This removes the reliance on your network for the code to work. Using more robust code solves the issue with relatively easy error handling. Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.
Jeff B.
Applications Engineer
National Instruments

I am absolutely appalled at Mountain Lion Operating System. I have loaded onto my iMac. It is a total disaster!!!!, I am absolutely appalled at Mountain Lion Operating System. I have loaded onto my iMac. It is a total disaster!!!!

I have loaded Mountain Lion Operting System on to my iMac. I am absolutely appalled at the suystem. It has been a disaster. Pages keep disappearing. No scroll functions.

drbobbyfromabu dhabi wrote:
...... the antivirus update take long to scan the system....
First, get rid of the "antivirus update". This will definitely slow down your system and will probably **** it up. Also, you don't need it.
Delete all anti-virus software, and related files, from your system, if possible using the "uninstall" facility that hopefully came as part of your anti-virus package.
Then restart your computer and see if things have improved, which I'm sure they will.

VERIZON'S HANDLING OF IPHONE 6? APPALLING!

It is now Thursday, 9/18
A good deal of us who placed pre-orders on the 12th within the first 15 minutes are screwed. Most of us our now getting phones sometime in October and a good number of people have not even gotten updates yet.
There are people who ordered later in the hour who now have tracking numbers and confirmation. I've seen them in topics on Reddit, NegoGaf and Mac Rumors.
Verizon mislead customers. They should have put up some kind of warning that 9/19 is only an estimate, as there could be delays. Instead, we were treated to a simple "Delivery Date: 9/19" box that remained intact throughout the entire check out process. Within hours, that date was switched when we saw our email confirmation. Way to reel us in! Many of us would have opted to wait longer for Apple's site to come on line. People ordering over an hour after Apple's site became active are getting 9/19 phones.
I hope more Journalists gets wind of this instead of reporting about top ten nonsense lists.

I agree this entire situation is not good. I was irritated along with everyone else. My family is only getting 2 of the 4 iPhones we ordered when Verizon said we would get them. I accept that because when there are 4 million pre-orders in the first 24 hours, you know there is not going to be enough to go around.
What time you ordered and when you will receive your iphone compared to someone else has to also take into account which model, color and size ordered, not just the time the order was placed.
I have a friend who ordered at Apple as soon as he could get his iPad app to work. He originally had a Sept 19 delivery. Now it has been delayed until early Oct. He ordered a 6+. My husband and I are getting our iPhones and my daughter and and son are not until Oct 7 (approximately). Mine is a gold 128gb 6+. My husband's is a slate grey 64gb 6. My daughter's is a gold 64gb 6+. My son's is black 64GB 6+. Different models order essentially within minutes of each other. All started out with Sept 19 delivery dates.
My biggest complaint with Verizon was the lack of information and updates about what was going on with our orders. Most of the time I just wanted to make sure my order really was in the system and I was going to eventually get the 4 iPhones I ordered. The higher ups made a bad decision to essentially let the customer service reps hang out to dry.
Was it fair to us to not get timely and correct information? Definitely not. Was it fair for us to take it out on the customer service reps when we didn't get any the information we wanted or the information we thought we should be getting. Definitely not. Should Verizon have fixed their system by now to at least reflect accurate information. Definitely. Is it worth getting so worked up about that we lose sight of the fact that it is only a phone. Absolutely not! The sun will come up on Saturday, even if some of us don't get our iPhones on Friday.

How to get rejected file absolute path location in file rejection handler

HI,
Right now I am working in the below scenario in SOA11G.
1) Create a file adapter service and wire it to a BPEL process.
2) Create a Fault-policies file where we have referred a Java Action as a Fault policy.
3) Refer that fault-policy to the Fault-Binding file and put both the file in the same directory with composite.xml file.
4) So when any rejection message happened with any wrong incoming file, the Java Action is getting called.
But as per my requirement I want to get the absolute path of the incoming file in my java action, so that I can write some other logic to copy that file to some other location.
So is there any API available to achieve this or any logic about how to get the absolute path of a rejected file at runtime.
Regards,
Tripathy.

Hi Omar,
You need to use OPEN_DATASET & READ DATASET statements to get the file from application server.
Steps:
Open dataset in read mode
Read the data set and collect into internal table
Now, convert this into XSTRING by using function module SCMS_STRING_TO_XSTRING
After converting into XSTRING, you can use CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE to download into local system
Please refer the below links
Upload File from SAP Application Server using ABAP
Application Server Program - ABAP Development - SCN Wiki
Hope this helps you.
Regards,
Rama

Broadband service = Absolutely appalling!

Hello,
We have been using your broadband service for about 3 years now. For the first 2 years everything was very fast and reliable. For the past year the connection has been getting worse and worse. It's now got to the point where the connection will disconnect constantly even though the lights are showing on the HomeHub.
Firstly I understand what overselling is and I understand that nothing is unlimited. I understand that your broadband customers will have grown considerably over the last year. Now what I do have a problem with is you limiting the connection to the point where it is now impossible to stay connected for 10 minutes without disconnecting. Sometimes I have to wait 15 minutes for the connection to resume after it disconnects.
Quite frankly I think the word "unlimited" should not be used at all especially since you cannot provide a connection that even fits in to the satisfactory category.
Jack

Feel really bad for you mate on this, have had problems with my own broadband in the past turned out to be my equipment but looks like you have ruled out that option.
Maybe a BT person will offer to help on this. Best of luck
ps love how you have written a complaint onto the public forum and included a link advertisiing your business

Appalling handling of VC025 by BT - absolute nonse...

Similar Messages

Maybe you are looking for