Apparent missing clear (unscrambled) channel

I have three TVs with QAM tuners connected directly to Fios (no STB). As of 1/9/12, WCAU NBC10 from Philadelphia disappeared from all three TVs. Actually, the HD feed is still there (after a rescan I found it on my Samsung TV as 63-140), but the "mapping" information telling the TV tuner that it is virtual channel 10.1 seems to be missing (as well as all program info). The same applies to 10.2 (it is there as a clear channel but no map to 10.2). All other local channels and sub channels are reported and mapped correctly, and continue as they have for the past several years. I don't really know if this is Verizon's problem of WCAU's, but OTA channel 10.1 is still correctly mapped from broadcast channel UHF 34 along with program data. Since the mapping is different for Fios, however, I suspect a Verizon issue. Can this be verified and fixed ?

Did a rescan today and my HTPC can't find NBC. It looks like this is a real screw up on the Verizon side. Hopefully this is resolved soon. If anyone knows who to contact to resolve this, please post a phone number or e-mail contact.
A similar problem reported in NY with about the same time frame may be related: http://www.dslreports.com/forum/r26730800-NYC-area-WNBC-4.1-missing-

Similar Messages

MR11 - Missing clearing documents

Hello,
we used MR11to clear old postings on account 191100. For the most FI documents a clearing document was created (I think automatically), but not for all. Is it possible to create clearing documents for some not cleared Fi documents manually or automatically? Thank you in advance for your help.
BR

Hi Ali Brim ,
MR11 is a month-end activity, by using this we can see the Missing clearing documents (Invoices)
For example: MIGO is happens with 100quantity but MIRO is happens with Quantity 90 difference 10 is showing in this.
when ever you post any differences between MIGO & MIRO it will appear in MR11, if you clear this automatically disappear from MR11, or else we can directly post/clear manually from MR11.
Rds,
Anil

Missing facility: graphic channel mixer

Hi Guys,
I miss a graphic channel mixer so that I can reduce channel separation in
problem zones, primarily the bass range when handling vinyl and shellack,
but there may also be benefits for similar processing in the treble range.
Kind regards
Peter Larsen

In the arrange window, check to make sure the check-boxes have been checked to display sends,pan etc etc etc.
I'm not infront of logic right now so I cant be more specific.
AD2

Clearing port channel configurations

In one of my 6509s I've got a lot of old port channel configs listed that I can't remove. How do I remove them short of clearing the config entirely?
Here's an example...
set port channel 3/41-42 64
set port channel 3/43-44 65
set port channel 6/47-48 67
set port channel 3/13-14 68
set port channel 9/5-6 86
set port channel 9/9-11 87
set port channel 2/2 93
set port channel 7/1-4 100
set port channel 7/25-28 106
set port channel 7/37-40 109
set port channel 7/41-44 110
set port channel 7/45-48 111
set port channel 4/5-8 112
set port lacp-channel 5/22,5/45 126
set port channel 6/29-30 127
set port channel 9/13-14 128
set port channel 9/12 129
set port channel 9/15-16 161
set port channel 4/41 537
set port channel 6/31-32 538
set port channel 8/1-4 661
set port channel 9/1-4 665
set port channel 1/1,2/1 719
set port channel 8/11-12 720
set port channel 8/13-16 721
set port channel 8/9-10 722
set port channel 8/7-8 723
set port channel 8/5-6 725
set port channel 4/9-12 726
set port channel 3/5-8 731
set port channel 3/1-4 732
set port channel 4/1-4 733
set port channel 9/7-8 734
set port channel 3/15-16 828
I can't do a "clear port channel" or anything like that.

Hi Friend,
I don't think you can remove this commands from configuration till the time you reuse this ports with etherchannel configuration.
The best idea will be copy the configuration from switch and paste it on a notepad and delete these lines and copy from notepad again and paste it on switch and I think this will take care of your issue.
HTH, if yes please rate the post.
Ankur

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

Missing Local HD Channels

I've had a problem with missing local HD channels, including NBC during the Olympics. Despite multiple phone tech calls and a tech visit, my problem has not been fixed. I've been hearing that some other Verizon customers in the Beaverton area have had this same problem, and completely changing out coax cables did not fix it. My incoming signal is good, but signal to noise is below what is should be (19). I have a suspicion that it may somehow be linked to my DVR/set-top box, as the latest case of missing channel 508 occurred just as I started recording. Only two channels seem to be affected, 506 and 508, both local HD channels.

You are a long way away from the Crystal Palace transmitter and COM7 is transmitting at only 15,600 Watts compared to the 200,000 Watts that the other existing muxes use. So weaker signal may not be being picked up by the dual tuner Youview bpx
http://www.ukfree.tv/txdetail.php?a=TQ339712
What signal strength do you get on your other TV ?

Comm channel missing in comm channel monitoring

Hi,
I have created sender and receiver communication channels of adapter type XI. I am using PI 7.0 version. But I don't see these communication channels in RWB comm channel monitoring.
I was going through the help.sap.com and in
http://help.sap.com/saphelp_nw04s/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm
In this it is mentioned clearly as "The XI adapter as part of the Adapter Engine gets the required....."
if this is part of the adapter engine then it should show the communication channels registered for it.
Moreover if SAP doesn't want to display these XI adapter com channels then why they have XI adapter type in the drop down box to filter the data.
Please provide your guidance in this regard.
thanku
bk

Hi Bhargvi,
XI adapter is in-built in the integration engine............in RWB in comm channel monitoring, you can view all the comm channels which are at adapter engine...................so this is why you cannot see your XI, IDOC or HTTP adpater in comm channel monitoring because these adapters reside in integration engine directly..................but to tell integration engine regarding the target system you have to configue thier comm channels in ID.
Regards,
Rajeev Gupta

Firefox 24 missing clear cache on exit option

I was going to enable the option to clear cache on exit, and found this answer:
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
However, in firefox 24, the privacy tab is totally different than the page shows. My option has "tracking", "history" and "Location Bar", instead of just history and location bar. Under "History" there is only on dropdown menu that does not have the "Clear History when Firefox Exists" and the "setting" button.
Why this feature is removed from v24?

To see all History and Cookie settings, choose:
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*https://support.mozilla.org/kb/Options+window+-+Privacy+panel
Note Firefox will disable the disk cache if you use "Clear history when Firefox closes".<br />
You can see that by the missing disk cache section on the about:cache and and in "Firefox/Tools > Options > Advanced > Network"

How to fix missing clear and skip buttons on quiz

Hi,
I am using Captivate 8. I have a number of courses set up the same why, wherein if a user fails the test, the jump to a slide that explains they failed the test, then upon hitting the next button takes them back to the beginning of the course again. I am not able to have this function if the infinite attempts is chosen, so I have given the user 999 attempts to do the quiz.
I am now running into a phenomenon where the "clear" and "submit" buttons are missing. It's not on all users. I have checked to see if the user has used up the 999 attempts and they have not. I figure it is a setting but I am nit sure where. Here are my pass/fail settings:
Here is what I see when I launch the course on the net. I use Cornerstone OnDemand, by the way.
I don't know what other data you my need from me, but any help would be great!
Thanks!
Pete

Try clearing out your Project Cache using the Clear Cache button under Edit > Preferences > General

Premiere Pro CS4, Missing #1 Audio Channel

Running CS4, on Vista Ultimate 64. P2 files
The 1st channel of audio is missing. I checked the footage on a separate machine, and it's all good, but on my PC, the wave form on the 1st channel of audio is blank. When I 1st put the audio into the timeline, I could see the wave form, but as soon as I hit play, it went blank. I tried to "adjust audio gain" and it crashed the program. I tried to make a new project, and re-import the audio in stereo, but it only gives me audio on the R side of the 1st channel. The 2nd channel is fine.
Weird stuff. Any hints?
Thanks!
Eric B.

The Panasonic P2 format
A P2 card is a solid-state memory device that plugs into the PCMCIA slot of a Panasonic P2 video camera, such as the AG-HVX200. The digital video and audio data from the video camera is recorded onto the card in a structured, codec-independent format known as MXF (Media eXchange Format). Specifically, Premiere Pro supports the Panasonic Op-Atom variant of MXF, with video in DV, DVCPRO, DVCPRO 50, DVCPRO HD, or AVC-I formats. A clip is in the P2 format if its audio and video are contained in Panasonic Op-Atom MXF files. These files are located in a specific file structure.
The root of the P2 file structure is a CONTENTS folder. Each essence item (an item of video or audio) is contained in a separate MXF wrapper file. The video MXF files are in the VIDEO subfolder, and the audio MXF files are in the AUDIO subfolder. XML files in the CLIP subfolder contain the associations between essence files and the metadata associated with them.
Note: Premiere Pro does not support proxies recorded by some Panasonic P2 camcorders in P2 card PROXY folders.
For your computer to read P2 cards, it needs the appropriate driver, which you can download from the Panasonic website. Panasonic also provides the P2 Viewer application, with which you can browse and play media stored on a P2 card.
Note: To use certain features with P2 files, you first change the file properties from read only to read and write. For example, to change the timecode metadata of a clip using the Timecode dialog box, you first set the file properties to read and write. Use the operating system file explorer to change file properties.

Missing one audio channel from MXF video

Greetings,
I have a bunch of footage shot with a Canon XF300 camera. Two wireless lav mics were feeding into the camera. On the day, I was monitoring audio and am 100% certain that it was recorded correctly. I found a couple of unerased CF cards from the shoot and was able to verify that the audio is good when I pop the CF card into the camera.
However, when I transfer the footage to hard disk and attempt to play it out using either Premier Pro CS5, or VLC, I'm losing channel one of the audio. I've been attempting to troubleshoot, and have found a couple of references on the Web regarding missing audio channel 1 from MXF video files -- but nothing that is relevant to this situation.
I'm on Mac OS X 10.6.6 and am running Premiere Pro CS5 5.0.3. No video cards.
I've tried bringing the files in using: Finder, XF Utility and ShotPutPro. I'm copying the complete directory structure in all cases.
Has anyone seen this problem before? Any troubleshooting thoughts?
Thanks,
Cameron

It turns out that the MXF files are coming in with 2 mono audio tracks, and for some reason, in the clip viewer, one of the audio tracks doesn't play, but if you move the clip to the timeline, both audio channels can be heard. Ran into the same issue with Cineform encoded material coming in with two mono audio tracks. So I'm going to file a bug report.
Ah, OK... now I understand. No need to file a bug report; maybe a feature request, but a bug report isn't necessary. Here's why:
When you bring in clips with mono channels, by default, you only hear the first mono channel when playing back in the Source Monitor. If you toggle over to Audio Waveform view (click the Output button), you can select which of the channels (called "Tracks" which is a little silly, frankly) you want to monitor. Here's what this looks like:
This applies to any format that has mono channels. If you interpret the footage to stereo (you must do this before you use it in a sequence), you can listen to both channels at once. Of course, then you have to deal with the audio as stereo, which is not always what you want. That's why I do a lot of my editing with MXF material (primarily P2) that has multiple mic sources in a sequence, where I can monitor more than one source channel.
In any event, that's why this isn't really a bug; it might be a poor design decision, but it's otherwise working correctly. I'd definitely suggest making a feature request for a "Mixed" or "Plus" audio source option in the Source Monitor. I'm going to do the same.
Anyway, I hope that helps explain the issue. Good luck!

Tampa Clear QAM channels

What are the channels available in Clear QAM in Tampa? Are the PEG channels included? What about the Music Channels?

AFAIK the PEG and music channels are all in clear QAM from all VHOs. You should also find your local SD and local digital (HD).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Adapter types & comm. channels missing in comm channel monitoring

Hello All,
We recently created a new sandbox XI system from a copy of our XI Test system
system. We used the SAPinst system copy process for ABAP+JAVA to create
this new XI sandbox system. We have followed all of the XI/PI post copy procedures listed in the system copy documentation and almost everything is working except when we going into the runtime workbench for XTX and go into communication channel monitoring for the adapter engine. When we get
here we do not see any adapter types where we should be seeing types such
as JDBC, BD, CIDX, FILE, JMS, etc We also do not see any communication channels in the communication channel monitoring if we select use filter to display all.
Any ideas?
Any help on this would be much appreciated
With regards
Steven

Hi,
First check in Integration Directory. Just create any dummy Communication Channel, if you are able to select your adapter for your communicatio channel then this is a cache issue. Just refresh the CPACache by this url.
http://<server name>:<HTTP Port>/CPACache/refresh?mode=full
Else you are not able to select any adapter for your communication channel then you have forgot to import the SAP BASIS Software Component Version into Integration Repository.
You can find it from your installation DVD's, and if you are not able to find then you can download it from service market place as given below..
[Click on this URL|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20]
In Search Term Enter SAP BASIS 7 or 3.
Now click on XI CONTENT SAP_BASIS 7.00 (if u r using PI else select SAP_BASIS 3.0) -
>
Database independent -
> SAPBASISxxxxx-0888.ZIP (this file should be based on your SP level)
Just save this file on your machine and unzip it.
Now put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
Now login to Integration Repository and from menu TOOLS ---> Import design objects and import it.
Regards,
Sarvesh

"Adapter Engine is missing in Communication Channel".

Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khanna

hi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you

XI communication channel missing in communication channel monitoring

Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?

Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
<i>The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
Regards,
Bhavesh

Apparent missing clear (unscrambled) channel

Similar Messages

Maybe you are looking for