Apparently I cannot use this brand new 1TB G-DRIVE Mini in the USB port of my AirPort Extreme?
Even though an Apple "Genius" said I can. Seems to not be getting enough power, maybe. Why do they feature pictures of these G-Drives as examples for using this feature??? Or maybe I'm doing something wrong? When I connect it directly to my MacBook Pro it works fine, but when I plug it into the USB port on the AEBS it makes kind of a weak clicking noise and never shows up. I have a 500GB Western Digital PassBook that works fine for this purpose, so at least that one is getting enough power from the USB on the AEBS.
Thanks Bob, I actually found some of your advice for someone else with a similar issue during my research! I can see where a powered USB hub would probably help, considering it does seem like insufficient power (the weak clicking). And I do have it formatted as Mac OS Extended (Journaled). I guess I was just wishfully thinking the problem would be something else, because I know it supplies enough power for a lot of other external drives, including my WD.
But as a final rant...seriously, why do they have a nice picture of an airport extreme with a G-drive where they advertise this feature. That's just annoying and misleading. And the people at the Apple store need to be better informed and more knowledgeable on the products they recommend and sell to customers.
Similar Messages
-
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
How do I get my ipod touch 5th generation to always use my car speakers when I plug it into the USB port?
If the problem occurs after you restore it to factory defaults/new iPod then it is likely a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
-
Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port
Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.
-
Can I use a 4G/3G hotspot in the USB port on a Airport
I am using Hughesnet by the way of the Ethernet plugin on the Airport which is VERY SLOW.
Can I use my 4G/3G Mobile hotspot by pluging it in to the USB port on the Airport ?Can I use my 4G/3G Mobile hotspot by pluging it in to the USB port on the Airport ?
Sorry, but no. The USB port on the AirPort Express will only work with a compatible printer. -
Cannot use this in a static context
I have a static method in which I am trying to use a logging class. I get an error that says "Cannot use this in a static context" when I compile the following code.
Log log = LogFactory.getLog(this.getClass());What's the problem and how do I get around it?1) What's the problem.
The error states the problem concisely. You are trying to use this[b] to get the class. You can't do this in a static method.
2) How do I get around it...
Instead of typing this.getClass() you type <CLASS_NAME>.classwhere CLASS_NAME is the name of the class the static method is in. -
My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using" cannot even charge it. Have offed and on several times, but same result. Any help on this.
To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures -
I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store. -
My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using". I cannot even charge it. I offed it and on it several times, still the same message keeps on coming.
To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures -
Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.
If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins. -
when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?
- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button? -
I use to have a iTunes account with my old computer, and I have lost all my iTunes music, some purchased, some downloaded from another source. Now I'm using a brand new computer (Windows) and I have opened a NEW iTunes account, but I now I need to figure out if it is possible to recoup my music content that I originally had. I had, I believe around close to 300 songs on my account ;(......Any help or guidance would be greatly appreciated.
Thanks Again, Ronald
<Email Edited By Host>ronaldkerr24 wrote:
Now I'm using a brand new computer (Windows) and I have opened a NEW iTunes account
Now remove all your info and update the old AppleiD/iTunes account and use only that account.
You cannot transfer items between iTunes accounts.
You can redownload all the content. -
there’s a glitch somewhere. iphoto just wont open. upgraded to yosemite and downloaded iPhoto upgrader and it doesn’t work, just keeps telling me to upgrade when I did already or quit, so no way to do photos on this brand new mac. that’s a pity!!
You need to have iPhoto 11 v9.6 (which you can get from the App Store) to use iPhoto on Yosemite. If you already have iPhoto 11 then the update is free. Otherwise it's a purchase.
-
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
I have Mac OS 10.5.8 and every time I try to install Air Adobe 3 I get the message
"You cannot use this version of the application Adobe Air Installer with this version of Mac OS X."
Could anyone help me?
JaiHi,
Adobe won't be developing for 10.5.8 new features (including new runtime) only security relates updates for existing runtimes (Flash 10.3.*/Air 2.7.*). Flash 11/Air 3.0 are only supported on 10.6.8.*/10.7.*, see:
http://kb2.adobe.com/cps/916/cpsid_91694.html#main_system_requirements
There is recent, lengthy thread on forums with Adobe's employees statements on that subject (support/development for 10.5.* and newer) but I cannot find it quickly as basically forum search is broken/hard to do,
regards,
Peter
Maybe you are looking for
-
Best Practices for image layout and positioning using anchored frames in Framemaker 10
Hi, I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of
-
How to call the BPM objects in the child JSP?
Hi, We are facing some problem, we are trying to use the JSP for the UI instead of BPM Presentation. In the JSP we are calling the child JSP(using JSP include), we need to pass the BPM objects from child to parent JSP. Can any one help me on how to p
-
How do I buy a book thru Kobo on my Ipad??
I have the Ipad first edition. I also have Kobo. I have previously bought books using my gift certificate. Now I can' t seem to buy a new book. what am I doing wrong? E
-
Dear SAP Guru's I have query kindly solve my issue. What is the basic configuration for RD04 out put type. Becoz iam doing the crosscompany sales, while customer is ordering the to Plant A, at tht time plant A is not having the goods, then Plant B wi
-
S posible publish a t.code using iView URL
Dear Experts. I have the following question: Is posible publish a t.code using iView URL? If this is posible how can do this? Regards