Appcompat error in windows XP program crashes

Hi, I am trying to run an embroidery digitizing program in Windows XP (I have Boot Camp). Program is Design Shop v. 9. It appeared to install correctly, and I have since installed a newer version. The program uses a dongle and when the program is opened and you begin to use it it crashes and gives me this error message. C:\DOCUME~1\carol\locks~1\temp\c5ba_appcompat.txt
Program runs successfully on pc.
I know there are others using this program on a mac. I appreciate any help in making this my actual work machine and not just the most expensive itunes system around.

I suggest reposting in the BootCamp forum here:
http://discussions.apple.com/forum.jspa?forumID=1244
I avoid any programs/apps that use dongles, like the plague.
Message was edited by: nerowolfe

Similar Messages

Hidden window causes program crash

I occasionally get a program message window that is hidden beneath another open window. I'm unable close the open window that is hiding the message or even select anything else in the program because I'm expected to respond to the program message before continuing. I keep getting the audio error sound every time I try to select anything. My workaround is to close Premiere and reopen the project. What's the solution?

Similar can also happen in many Adobe programs, when one has multiple monitors and then goes back to just one. Some of those dialog screens can get way out into space!
Good luck,
Hunt

Program crashes without error message when opening a database

One of our users is experiencing an issue with Discoverer Desktop whereby the program crashes with no error message when he attempts to open a database from a local or network drive. If he logs in to Windows as himself, and runs Discoverer as himself, the program crashes under any Discoverer login; if I log in to Windows using an admin account, and run the program under the same context, the same issue occurs; however, if I log in to Windows as the user and run the program under the context of admin, the error does not occur under any Discoverer login.
I've tried removing and reinstalling the program but this has not alleviated the issue. The program version is 10.1.2.55 running on Windows XP SP3. If there are any other relevant details required to diagnose the issue I will gladly provide them. Could someone please help me resolve this?
Edited by: 805312 on Oct 27, 2010 6:25 AM

Welcome to the forums !
Has this ever worked ? Pl see if MOS Doc 197716.1 (Running Discoverer Desktop on Windows 2000 Or Later Releases As a Restricted User Fails With "Failed to update the system registry. Please try using REGEDIT.") can help.
One option might be to install Process Monitor (http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx) to identify the cause of the issue.
HTH
Srini

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Using InDesign CC on Windows 7 Ultimate. Every time I hit the text tool button the program crashes

When using InDesign CC, every time I hit the text tool button, the program crashes.

Arpit thanks, I have almost exactly the same issue, except that any editing of any kind in my Indesign CC seems to cause a crash.Windows 7 home premium.64bit
I have received the same solution as you gave above, from the tech team, but cant find the correct file to add the "CopyPlugins.vbs script." to....I get an error message telling me to try again and chose the file adobe indesign CC, and yet that's what I'm doing. There must be an instruction missing for finding the correct file.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing." I can not access my Itunes library. Also, an "error 7 Windows error 126" appears as well. Any ideas?

When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!

Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

I get an error 7 (Windows error 126) when I try to open itunes. It says that it wasn't installed correctly. I have removed and reinstalled this program and all accompanied programs several times. My itunes was fine until I did an update several months ago

Please help. I have been using itunes with my ipod nano for years. Several months ago I did a requested upgrade and have not been able to open itunes since. I get an error message that says that itunes was not installed correctly. Error 7 (Windows error 126) I have tried to uninstall all Apple programs and reinstall itunes several times and it doesn't work. I keep getting the same message. I am looking for a solution to get my library back so I can but more songs for my ipod.

I have same problem--did you ever find a solution?

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

I have tried to update my itunes program. It was running great until I attempted the update now all I get is an error message that says "Itunes was not installed properly, Please reinstall itunes, Error 7 (Windows erroe 126)". What can I do to get my it

I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". I have tried that twice with no luck. Can someone help me get my music back???

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Keep getting a Runtime Error Program Files (x86)... R6034 An application has made an attempt to load the C runtime library incorrectly. Also another pop up - Error 7 (Windows error 1114)

I updated itunes. Now it doesn't run. I keep getting -" Runtime error Program Files (x86)...itunes helper R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact support team."
Well how do you do that without owning a MAC? This error pops up every time I start my computer. The other pop up says Error 7 (Windows error 1114)
I have uninstalled itunes and re-installed it (I still get the pop up after itunes was uninstalled.)
I can't find a restore point before the latest update. And I can't run itunes on my Windows 7 computer. Any advice out there?

Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

Several programs crash with Glib-GIO error

in my notebook several programs crash with an error ouput:
(here for firefox)
(firefox:6303): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
(firefox:6303): GLib-CRITICAL **: g_error_free: assertion `error != NULL' failed
(firefox:6303): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
(firefox:6303): GLib-GIO-WARNING **: (gfile.c:5244):IA__g_file_load_partial_contents_finish: runtime check failed: (g_simple_async_result_get_source_tag (simple) == g_file_load_contents_async)
Speicherzugriffsfehler
- firefox crashes every time i try to browse for a file (fileupload form).
- nautilus --no-desktop crashes also before the gui is loaded with the same error output.
- same to brasero
- same to gnomebaker
- evince crashes on open/file (again when browser should be opened)
thunar works, seems there is a problem with nautilus or any gnome's lib
on my another pc also running arch, there are no such problems.. would be great if anyone would help.
every hint is welcome, since i'm pretty frustrated.. google and irc didn't help.
thank you in advance

Hi
I experience a very similar problem.
Whenever I insert a blank CDrom or a blank dvd some applications crash that somehow access the dvd drive. these are brasero or listen, that I'm aware of, for the moment.
others like gnome-baker do fine. nautilus as well is doing fine.
brasero:
(brasero:25610): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
(brasero:25610): GLib-CRITICAL **: g_error_free: assertion `error != NULL' failed
(brasero:25610): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
(brasero:25610): GLib-GIO-WARNING **: (gfile.c:5244):IA__g_file_load_partial_contents_finish: runtime check failed: (g_simple_async_result_get_source_tag (simple) == g_file_load_contents_async)
Segmentation fault
listen does:
(listen.py:25694): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
sys:1: Warning: g_error_free: assertion `error != NULL' failed
(listen.py:25694): GLib-GIO-CRITICAL **: g_simple_async_result_set_from_error: assertion `error != NULL' failed
(listen.py:25694): GLib-GIO-WARNING **: (gfile.c:5244):IA__g_file_load_partial_contents_finish: runtime check failed: (g_simple_async_result_get_source_tag (simple) == g_file_load_contents_async)
/usr/bin/listen: line 1: 25694 Segmentation fault LD_LIBRARY_PATH=/usr/lib/firefox python -OO /usr/lib/listen/listen.py $@
So it's bothering as all the time i want to burn something listen will crash.
Otherwise I'm using gnome-baker for burning, so it's ok.
but bothering.
This might help you.
If I can give u more information, just tell me (but I have to tell u: I'm not a big pro!)

Setup program crashes when you try to install a 2007 Office on a 64-bit version of Windows 7

Hello there,
I have a Dell Vostro machine with Windows 7 Pro 64-bit installed on it. It came with Office 2010 preinstalled on it. About 6 months ago I removed Office 2010 and installed Office 2007 with no problems. Yesterday a user messed up her office so badly
that I had to uninstalled it in an attempt to reinstall to ensure that all missing files exist. A few seconds after selecting my options, the installation program crashes. I tried it with a few different users logged in to make sure it's something related
to the profile of the user I was logged in as.
Just to be clear, this is the same Office 2007 installation that was installed correctly on it about 6 months ago and the same product key.
Why is this happening and how can I fix this issue without having to restore the computer to its default state?
Any help is appreciated.
Thank you,

Hi,
Please refer to this kb, use Microsoft Fix it 50154 to uninstall Office 2007 completely:
http://support.microsoft.com/kb/928218/en-us
Then try installing again.
We can also perform a clean boot to install, which gets rid of the background program conflicts:
http://support.microsoft.com/kb/929135
Hope this can help.
Regards,
Melon Chen
TechNet Community Support

Appcompat error in windows XP program crashes

Similar Messages

Maybe you are looking for