AppContainers_test fails with error during pre-test configuration checks
Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.
Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem
Similar Messages
-
Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal -
Windows Installer (MSI 5.0) fails with ERROR 1939 during "MsiConfigureServices" action
When trying to install a setup package using the new MSI 5.0 features of Windows Service Configuration (using Tables: MsiServiceConfig / MsiServiceConfigFailureActions)
the service config fails and results in a rollback.
The service itself is installed along with the same package under "LocalSystem" account.
Regarding MSDN, these feature does have some limitations, but I am not shure if they are applicable here:
"The services configuration feature of the Windows Installer cannot configure network service accounts, install shared service host (svchost) processes, or restart services stopped as part of the installation"
(see
http://msdn.microsoft.com/en-us/library/windows/desktop/dd408113(v=vs.85).aspx )
I have tried this with serveral variations on the failure actions count and type.
Using SC_ACTION_NONE or SC_ACTION_RUN_COMMAND actions indeed work and lead to a successful install.
Can you tell, why SC_ACTION_RESTART or SC_ACTION_REBOOT does not work fine?
PS: The guys on MS Connect didn't want so solve that issue ;-)
https://connect.microsoft.com/WindowsServer/feedback/details/785032/windows-installer-msi-5-0-fails-with-error-1939-during-msiconfigureservices-actionHi,
For this query, I suggest ask in MSDN forum
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
TechNet Subscriber Support |If you have any feedback on Technet forum, please contact [email protected] -
Hi,
I'm trying to add Citrix LoadBalancer (NSVPX-HyperV-10.1-119.7_nc) in VMM 2012 R2 and on click of test button, only the "Retrieve-LBSystemInfo" test is failing with Error Code 21426 and exception as below. Whereas, rest of
the test are getting passed.
Can anyone please let me know whether am I missing anything? FYI, I configured citrix lb as per blog: http://kristiannese.blogspot.in/2011/07/load-balancing-and-cloud-computing.htmlYour problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead. -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
CPU12.1.0.2.3 opatchauto failed with error code 255.
I am installing critical patch update 12.1.0.2.3 (15-APR-2015) for Grid Infrastructure standalone on Linux. It fails with the subject error code and the following additional messages:,
The user is root. OPatch cannot continue if the user is root.
opatchauto failed with error code 255.
The instructions specifically tell me to login as root before installing the patch, so what's up?
The instructions say to first upgrade OPatch to the latest, which I have done and verified.
Second, an OCM Response File is mandatory, so I followed the steps to create this file and saved it as /home/grid/ocm.rsp with default permissions 644.
Third, the instructions say to download the patch and unzip it to an empty location that cannot be /tmp. I created a new directory /home/grid/foo and unzipped the software to that location. So, the unzip location is /home/grid/foo/ and in that directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
Fourth, the readme says the patch must be installed by a user with root privileges, so I have logged in as root. (Oracle Note 1591616.1 says you must login as root, not just be root like).
As root I have set environment variable for ORACLE_HOME pointing to the GI Home, and I set PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/OPatch.
Finally, I invoke opatchauto with the required parameters and it throws an error saying I cannot be root. I fussed with the parameters and the result is always I cannot be root.
From the documentation,
Case 3: Patching GI Home Alone
You should use the following instructions if you prefer to patch Oracle GI (Grid Infrastructure) home alone with this patch.
Case 3.1: Non-Shared GI Home
If the GI home is not shared then use the following instructions to patch the home.
Case 3.1.1: ACFS File System Is Not Configured
Follow these instructions in this section if the GI home is not shared and none of the Oracle database homes use ACFS file system for its software files.
Execute the following on each node of the cluster.
As root user execute:
# opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
My command is,
opatchauto apply /home/grid/foo/20485724 -oh /u01/app/12.1.0.2/grid -ocmrf /home/grid/ocm.rsp
So, not a syntax problem. It simply won't let me run it as root despite that being a hard requirement.Hello,
I tried with above command and faced the a different error . I tried applying patch 4487801.
ApplySession applying interim patch '4487801' to OH <Oracle_Home>
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
bleProduct" failed.
The details are:
OPatch found incompatible or invalid applicable product type with respect to the
Oracle Home.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
Please guide. -
Preverification failed with error code 1. BUILD FAILED
Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
<project name="watsdownapp-impl" default="jar" basedir="..">
<!--load-properties-->
<target name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property name="user.properties.file" location="${netbeans.user}/build.properties"/>
<available property="user.properties.file.exists" file="${user.properties.file}"/>
</target>
<target name="exists.config.active" unless="config.active">
<echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
<property value="" name="config.active"/>
</target>
<target name="exists.netbeans.user" unless="netbeans.user">
<echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
</target>
<target name="exists.user.properties.file" unless="user.properties.file.exists">
<echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
</target>
<target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
</filterchain>
</loadproperties>
<property name="deployment.instance" value="default"/>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
<replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
<replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<!--basic-init-->
<target name="exists.platform.active" unless="platform.active">
<echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
</target>
<target name="exists.platform.configuration" unless="platform.configuration">
<echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
<property name="platform.configuration" value="CLDC-1.0"/>
</target>
<target name="exists.platform.profile" unless="platform.profile">
<echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
<property name="platform.profile" value="MIDP-1.0"/>
</target>
<target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<property name="javac.source" value="1.3"/>
<property name="javac.target" value="1.1"/>
<property name="javac.encoding" value="${file.encoding}"/>
<property name="deployment.number" value="0.0.1"/>
<property name="deployment.counter" value="000002"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.preprocess">
<isfalse value="${use.preprocessor}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
<condition property="deployment.do.override.jarurl" value="">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<condition property="config.active.name" value="DefaultConfiguration">
<length string="${config.active}" trim="true" length="0"/>
</condition>
<property name="config.active.name" value="${config.active}"/>
<taskdef resource="org/netbeans/mobility/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<condition property="skip.deployment">
<equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
</condition>
<condition property="app-version.autoincrement.trigger">
<istrue value="${app-version.autoincrement}"/>
</condition>
<condition property="debug.timeout" value="30000">
<or>
<equals arg1="${debugger.timeout}" arg2="" trim="true"/>
<not>
<isset property="debugger.timeout"/>
</not>
</or>
</condition>
<property name="debug.timeout" value="${debugger.timeout}"/>
<nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
</target>
<!--cldc-init-->
<target name="cldc-pre-init">
<condition property="cldc-platform.trigger">
<equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
</target>
<target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
<property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<property name="platform.device" value=""/>
<property name="dist.jad.url" value="file://"/>
<property name="run.cmd.options" value=""/>
<condition property="evaluated.run.security.domain" value="">
<isfalse value="${run.use.security.domain}"/>
</condition>
<property name="evaluated.run.security.domain" value="${run.security.domain}"/>
<condition property="override.jarurl.trigger">
<and>
<istrue value="${cldc-platform.trigger}"/>
<istrue value="${deployment.override.jarurl}"/>
</and>
</condition>
<property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
<property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jad}"/>
<include name="${dist.jar}"/>
</patternset>
</target>
<!--cdc-init-->
<target name="cdc-init">
<condition property="cdc-platform.trigger">
<equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
<available file="${manifest.file}" property="manifest.available"/>
<condition property="main.class.applet">
<equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
</condition>
<condition property="main.class.xlet">
<equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
</condition>
<condition property="manifest.available+main.class+fat.jar">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<istrue value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<isfalse value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="application.version.invalid" value="true">
<equals arg1="${deployment.number}" arg2="" trim="true"/>
</condition>
<fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
<condition property="sign.jar.trigger" value="true">
<and>
<isset property="cdc-platform.trigger"/>
<istrue value="${sign.enabled}"/>
</and>
</condition>
</target>
<!--semc-init-->
<target name="semc-pre-init" if="cdc-platform.trigger">
<condition property="semc-platform.trigger">
<equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
<condition property="semc.icon.invalid" value="true">
<or>
<contains string="${semc.application.icon}" substring="$${"/>
<equals arg1="${semc.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<condition property="no.certificateorkey" value="true">
<or>
<isset property="no.application.uid"/>
<equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
<contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
<equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
<contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
</or>
</condition>
<property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
<classpath>
<pathelement path="${libs.cdc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
<classpath>
<pathelement path="${libs.semc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="*.sis"/>
<include name="*.SIS"/>
</patternset>
</target>
<!--savaje-init-->
<target name="savaje-pre-init" if="cdc-platform.trigger">
<condition property="savaje-platform.trigger">
<equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
<property name="savaje.application.uid" value="TBD"/>
<condition property="savaje.bundle.base.invalid" value="true">
<or>
<equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
<contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
</or>
</condition>
<condition property="savaje.unsupported.main" value="true">
<or>
<equals arg1="${main.class.applet}" arg2="true"/>
</or>
</condition>
<condition property="savaje.icon.invalid" value="true">
<or>
<isset property="no.application.uid"/>
<contains string="${savaje.application.icon}" substring="$${"/>
<equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="bundle.jnlp"/>
<include name="bundle.policy"/>
<include name="lib/*"/>
</patternset>
</target>
<!--sjmc-init-->
<target name="sjmc-pre-init" if="cdc-platform.trigger">
<condition property="sjmc-platform.trigger">
<equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
<!--ojec-init-->
<target name="ojec-pre-init" if="cdc-platform.trigger">
<condition property="ojec-platform.trigger">
<equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
<!--cdc-hi-init-->
<target name="cdc-hi-pre-init" if="cdc-platform.trigger">
<condition property="cdc-hi-platform.trigger">
<equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
<!--nokiaS80-init-->
<target name="nokiaS80-pre-init" if="cdc-platform.trigger">
<condition property="nokiaS80-platform.trigger">
<equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
<property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<condition property="nokia.icon.invalid">
<or>
<contains string="${nokiaS80.application.icon}" substring="$${"/>
<equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jar}"/>
</patternset>
</target>
<!--init-->
<target name="pre-init"/>
<target name="post-init"/>
<target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
<!--conditional clean-->
<target name="conditional-clean-init">
<uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
</target>
<target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<!--deps-jar-->
<target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
<!--preprocess-->
<target name="pre-preprocess"/>
<target name="do-preprocess" unless="no.preprocess">
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<property name="abilities" value=""/>
<property name="debug.level" value="debug"/>
<mkdir dir="${preprocessed.dir}"/>
<echo message="ignore me" file="${build.dir}/.timestamp"/>
<nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
</nb-prep>
<copy todir="${preprocessed.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
</target>
<target name="post-preprocess"/>
<target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
<!--compile-->
<target name="pre-compile"/>
<target name="do-compile">
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
</target>
<target name="extract-libs" description="Extracts all bundled libraries.">
<mkdir dir="${build.classes.dir}"/>
<nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
</target>
<target name="post-compile"/>
<target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
<!--compile-single-->
<target name="pre-compile-single"/>
<target name="do-compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
</target>
<target name="post-compile-single"/>
<target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
<!--proguard-->
<target name="proguard-init" description="Up-to-date check before obfuscation.">
<property name="obfuscation.level" value="0"/>
<condition property="no.obfusc">
<or>
<equals arg1="${obfuscation.level}" arg2="0"/>
<uptodate targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</or>
</condition>
<uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</target>
<target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<property name="obfuscator.classpath" value=""/>
<dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
<dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
<property name="obfuscation.custom" value=""/>
<nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<!--obfuscate-->
<target name="pre-obfuscate"/>
<target name="post-obfuscate"/>
<target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
<!--lwuit-build-->
<import file="lwuit.xml" optional="true"/>
<target name="-lwuit-check">
<condition property="lwuit.allowed">
<and>
<available file="nbproject/lwuit.xml"/>
<isset property="is.mesdk_lwuit"/>
</and>
</condition>
</target>
<target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
<antcall target="lwuit_build"/>
</target>
<target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
<!--preverify-->
<target name="pre-preverify"/>
<target name="do-preverify" if="cldc-platform.trigger">
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<mkdir dir="${preverify.sources.dir}"/>
<copy todir="${preverify.sources.dir}">
<fileset dir="${buildsystem.baton}" includes="**/*.class"/>
</copy>
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
<copy todir="${preverify.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
</target>
<target name="post-preverify"/>
<target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
<!--set-password-->
<target name="set-password-init">
<property name="sign.enabled" value="false"/>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
</target>
<target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
<nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
</target>
<target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
<nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
</target>
<target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
<!--create JAD-->
<target name="add-configuration" unless="contains.manifest.configuration">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
</target>
<target name="add-profile" unless="contains.manifest.profile">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
</target>
<target name="create-jad" if="cldc-platform.trigger">
<fail unless="dist.jad">Must set dist.jad</fail>
<mkdir dir="${build.dir}"/>
<dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
<mkdir dir="${dist.jad.dir}"/>
<condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
</condition>
<condition property="contains.manifest.profile">
<contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
</condition>
<property value="" name="evaluated.manifest.apipermissions"/>
<property value="" name="evaluated.manifest.pushregistry"/>
<property name="manifest.jad" value=""/>
<property name="manifest.manifest" value=""/>
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
<antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
<antcall target="add-profile" inheritall="true" inheritrefs="true"/>
<property name="manifest.available" value="true"/>
</target>
<!--do-extra-libs-->
<target name="do-extra-libs" if="extra.classpath">
<property name="dist.lib.dir" value="${dist.dir}/lib"/>
<mkdir dir="${dist.lib.dir}"/>
<copy todir="${dist.lib.dir}">
<path path="${extra.classpath}"/>
<flattenmapper/>
</copy>
</target>
<!--nokiaS80-manifest-->
<target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
<fail message="Main class is not set!">
<condition>
<equals arg1="${main.class}" arg2="" trim="true"/>
</condition>
</fail>
<mkdir dir="${build.dir}/j9"/>
<taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
<j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
<copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
<property name="manifest.available" value="true"/>
<loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
</target>
<target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
<pathconvert property="logo.icon.name" pathsep=" ">
<path path="${nokiaS80.application.icon}"/>
<chainedmapper>
<flattenmapper/>
<globmapper from="*" to="*"/>
</chainedmapper>
The error says class file is missing, you can try to clean and build.
-
SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317
Hello,
Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
I get the folowing error in smsts.log:
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
End program: TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Here is the complete smsts.log: http://1drv.ms/1pwTEBf
To explain the Problem in Detail:
The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
My Problem must be related to the different Domains and the forest trust.
My Setup:
MP published to DNS in both domains
Schema Extended in both domains
System Management Container published and verified in both domains
ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
Network Access account configured with Domain B account
Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
Any suggestions?
Many thanks.
regards,
ChristianHi Christian,
So do you actual get an error message in your TS or is it just failing to join Domain B? (Could be both if the machines fails to join the domain).
Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
Also, if it a domain join issue, can you try manually joining to domain B using the same service account? -
SSIS custom execute sql task : Failed with error
I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
SangHi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo -
Adobe creative suite 5.5 Master collection をインストールしようとしたところ、2枚目のCDをいれたところで、下記のようなエラーが出て、インストールできません。
（エラー内容が多いので、最下部に表示します）
どのようにしたら、インストールできますでしょうか？
再起動し、何度、インストールしても、同じ結果となります。
なお、パソコンの環境は以下のとおりです。
宜しくお願いします
■■■■■■■インストール環境■■■■■
Windows 7 Professional SP1
Dell Optiplex 3020 メモリ４G 64ビットOS HDDの空き容量343G
他のadobe 製品はすべてアンインストールされており、フォルダも削除済み
■■■■■■エラー内容■■■■■■■■
インストールのステータス
インストールでエラーが発生しました。
システムを再起動して、再度インストールを実行してください。
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 150 error(s), 151 warning(s)
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1620 - このインストール パッケージを開くことができませんでした。アプリケーション ベンダーに問い合わせ、この Windows インストーラー パッケージが有効かどうかを確認してください。
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe ExtendScript Toolkit CS5.5: Install failed
ERROR: DW050: - Adobe Buzzword CS5.5: Install failed
ERROR: DW050: - GermanSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe Dreamweaver CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Flash CS5.5_AdobeFlash11.5-ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Linguistics CS5 x64: Install failed
ERROR: DW050: - AIR for Apple iOS support (FB): Install failed
ERROR: DW050: - Digital Publishing: Failed due to Language Pack installation failure
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Pro CS5.5 Support: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core_x64: Failed due to Language Pack installation failure
ERROR: DW050: - Recommended Common Fonts Installation x64: Install failed
ERROR: DW050: - Suite Shared Configuration CS5.5: Install failed
ERROR: DW050: - AdobePDFL x64 CS5: Install failed
ERROR: DW050: - Adobe Fireworks CS5.1_AdobeFireworks11.1.0ja_JPLanguagePack: Install failed
ERROR: DW050: - DynamiclinkSupport: Install failed
ERROR: DW050: - Adobe Contribute CS5.1_AdobeContribute6.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1_AdobeOnLocation5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: DW050: - IE Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Encore CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - ItalianSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Pixel Bender Toolkit: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64: Install failed
ERROR: DW050: - Adobe Hunspell Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Adobe Encore CS5.1_AdobeEncore5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - SpanishSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1 Third Party Content: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Premiere Pro CS5.5_AdobePremierePro5.5ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe Extension Manager CS5.5: Install failed
ERROR: DW050: - Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll: Install failed
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5.5: Install failed
ERROR: DW050: - Firefox Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Linguistics CS5.5: Install failed
ERROR: DW050: - Adobe Device Central CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Office Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5.1: Install failed
ERROR: DW050: - AdobeMotionPicture CS5.5: Install failed
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-ja_JP: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe After Effects CS5.5 Third Party Content: Install failed
ERROR: DW050: - Adobe Audition_AdobeAudition4ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit): Install failed
ERROR: DW050: - Adobe After Effects CS5.5 Template Projects & Footage: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Adobe Flash Builder 4.5: Install failed
ERROR: DW050: - Adobe Media Encoder CS5.5 X64: Install failedありがとうございます！試してみます。
とはいえ、同じCDを使って、別のパソコンには普通にインストールできました。
なので、CDの問題ではないような気もします。（ひょっとしたら、そのパソコンのCDの読み込みがよくないのかもしれませんが）
さておき、いったん、ダウンロード版で試してみます～ -
[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards AkselHello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network... -
Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Installation failed with error code 1603
Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
NaveedI have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done -
OPatch failed with error code = 255
Hello,
I have installed Oracle 9.2.0.1 in my system.
Now, i want to apply a patch on that Oracle by using Opatch.
But when i try to apply Optach, i am facing teh follwing error
"Please make sure you are running OPatch with JRE version 1.4 or later.
OPatch failed with error code = 255"
I have installed jre version 6 after that and jdk 1.5. Still i m facing the same issue.
Please help.
As i need to upgrade my oracle and i m stuck up with that error.
Thanks,
DeepakHello,
I tried with above command and faced the a different error . I tried applying patch 4487801.
ApplySession applying interim patch '4487801' to OH <Oracle_Home>
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
bleProduct" failed.
The details are:
OPatch found incompatible or invalid applicable product type with respect to the
Oracle Home.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
Please guide. -
SCUP 2011 publishing fails with error: Failed to sign package; error was: 2148081670
Hi,
I have a SCUP 2011 installed on the same machine has SCCM 2012 and WSUS. I installed and configured SCUP 2011, as shown in this video http://www.youtube.com/watch?v=fyEGWSFWyy0. Everything was ok, but after upgrading to SCCM 2012 R2, i'm unable to publish
to the update server.
Every single publishing attempt fails with error:
at Scup.Wizards.PublishOperation.Start() 01/01/1601 00:00:00 33730480 (0x202AFB0)
at Scup.Wizards.PublishProgressPage.DoWork(Object sender, DoWorkEventArgs e) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() 01/01/1601 00:00:00 33730480 (0x202AFB0)
at System.Threading.ThreadPoolWorkQueue.Dispatch() Updates Publisher 27/11/2013 16:04:52 6 (0x0006)
PublishItem: InvalidException occurred during publishing: Failed to sign package; error was: 2148081670 Updates Publisher 27/11/2013 16:04:52 6 (0x0006)
Publish: A fatal error occurred during publishing :Signature verification exception during publish, verify the WSUS certificates and advanced timestamp setting are properly configured. Updates Publisher 27/11/2013
16:04:52 6 (0x0006)
Publish: Background processing completed. Updates Publisher 27/11/2013 16:04:52 1 (0x0001)
I have deleted and generate new self-signed WSUS certs, and i have imported them to the appropriated cert stores.
I have checked and double-checked the posts about this subject on this forum, but haven't found any working solution.
Appreciate all the help u guys can give me.
Best regards,
AdrianoHi,
Please try applying the update below for this issue.
System Center Update Publisher does not publish customized updates to a computer if WSUS 3.0 SP2 and the .Net Framework 4.0 are installed
http://support.microsoft.com/%3Fkbid%3D2530678
Have you looked at this
System Center Update Publisher 2011 and Windows Server 2012
http://blogs.msdn.com/b/minfangl/archive/2012/12/01/system-center-update-publisher-2011-and-windows-server-2012.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Edit Contact and/or Item in an open call.
Is there a way to edit the contact and/or item a call is logged against? Both for manually entered calls and for Calls opened via email. LiveTime docs certainly seem to suggest that a call opened via email using the 'Unknown' item can be edited to as
-
Jar (or Zip) file with problems in accents, special characters
Hi! I've a servlet that creates a jar (or zip) file and then send it. My problem is that when I create an entry in which the filename has special characters such as accents, when I unjar or unzip de file, it brings a lot of garbage characters. For ex
-
IPM Action module ( c# ) or IPM SDK samples help
Could anybody guide me on where to find samples or send me the samples, which I read in Install document of OIPM V 7.7.1.0 ? Content goes like this " *Building and Running Action Module Samples* The Sample Action Modules are not installed by the SDK
-
Iphoto unexpectedly quits.. so much fun
Hi everyone Havent needed your help since the last time, but grateful for all your support. I have to ask for some assistance on a small problem which has been driving me mad! iPhoto starts up fine and allows me to view, shuffle, amend all the photos
-
I've had a lot of problems for about a week viewing Youtube type video media. I'm not sophisticated enough to know what this type is called, but I just get a blank white or black space where the video should be. My computer is totally up to date, and