APPCRASH - "Crystal Reports has stopped working"- windows message

Hi,
I had installed Crystal reports 2008 using valid license keycode on Windows Server 2008 machine ( crystal software not registered it in Sap portal for additional support)  This was used for crystal reports development in .Net for few days, After 1 month or little more , the crystal reports stopped working and when launched from Start -> Programs -> Crystal Reports 2008 displayed a windows error message " Crystal Reports has stopped working ".
Following is the details about Problem from windows message
Problem Event name: APPCRASH
Application name: crw32.exe
Application version : 12.0.0.683
Fault Module Name: x2rpclB5.dll
Exception Code : c0000005
OS Version : 6.0.6001.2.1.0.274.10
I Uninstalled and reinstalled the application with valid license keycode and registered as well, but still the error remains same when the application is started.
Kindly suggest on how to resolve this issue.

Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Reports design, Crystal Reports (exe) installation and other issues should be posted to the [Report Design forum|SAP Crystal Reports;
Now, looking up the DLL,(x2rpclB5.dll) it appears to be a Xerox printer driver(?). You mention that this started to happen recently, so the question would be; was a Xerox printer driver installed? Also, see if either uninstalling the printer driver or installing any available updates fomr Xerox will resolve the issue.
Ludek

Similar Messages

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
    "Crystal Reports has stopped working"
    Problem signature:
    Problem Event Name: BEX
    Application Name: crw32.exe
    Application Version: 11.0.0.1282
    Application Timestamp: 422d5c77
    Fault Module Name: StackHash_1fc1
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 7ef2fbfc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.272.7
    Locale ID: 1033
    Additional Information 1: 1fc1
    Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
    Additional Information 3: 2f92
    Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
    Any recommendation on what is causing this error?
    Thanks,
    Luis

    Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
    Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
    The error I'm getting when trying to start the service is:
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
    I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

  • Crystal Reports XI crashes says "Crystal Reports has stopped working"

    I'm on Crystal Reports Xi release 2 sp2, with windows 7, I also have visual studio 2008 installed.
    When I try to add any fields or objects to a report in crystal reports it crashes and throws up a windows generic error message that says "Crystal Reports has stopped working"  There is no additional error information besides that...  I've tried a number of fixes, too many to list here, but no go, and apparently calling for tech support requires me to pay more money! ack.  We've already paid for the product, I just want to use it..
    Does this version of crystal reports even work on windows 7?  if I could get a straight answer on that it would be a start anyway...
    Sorry to be snippy, I'm just frustrated!!!

    Upgrading to SP6 solved the issue.  I originally thought sp4 was the newest because of this page: http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp
    which is out of date...
    Thanks for the quick fix.

  • Crystal Reports has stopped working

    I just installed Crystal Reports 2013. I am using Windows 7. The program opens up and everything looks normal but when I open a blank report and try to create a new connection, it immediately gives me the error "Crystal Reports has stopped working" and closes me out of the program. I talked to support and they told me to uninstall and reinstall the program. I tried that but still get the same exact error. Another support rep sent me an update to try. I tried that with the same results. Can someone please help me with this?

    Hi Try setting the DEP.
    1) Click Start > Run, > type sysdm.cpl, and then click OK.
    2) On the Advanced tab, under Performance, click Settings.
    3) On the Data Execution Prevention tab, click Turn on DEP for all programs and services except those I select > then click Add to add the CRW32.exe (You need to browse to the executable file)
    P.S  Solution provided by AbhilashKumar

  • Error - Crystal Reports has stopped working

    I have downloaded the CR 2011 trial, and I am trying to open a Crystal 7 report.  The strange thing is that it was opening OK before, but has now stopped opening.   Some of the Crystal 7 reports I have are able to be opened, and others are not.
    The error is not helpful - Crystal Reports has stopped working.  Windows is checking for a solution to the problem.   I have uninstalled and reinstalled the CR 2011 trial, but this has not helped.
    Has anyone had a similar problem?

    Thomas,
    Can you create a brand new reports against those Stored Procedures?
    Are the .rpt files from CR 7 still have the old "last modified" date?
    What if you try a middle CR version, like install temporary CR XIR2, open and save the reports and then try to open in the latest version?
    Do you know if failing reports have any external links like Linked pictures, OLE objects, etc.?
    Have you ever used Process Monitor utility? It may be helpful to identify what CR is trying to do.
    Vitaly.

  • Crystal Reports has stopped working with Windows 7 and demo database

    I'm trying to get back up to speed on Crystal Reports after 10 years away. I'm running Crystal Reports 2008 Standard with the just-released Service Pack 3 (same symptom with SP2).
    So I downloaded the demo database and tried creating a new report. No problems creating a simple customer list. When I add the Orders table and link the CustomerID columns and then add the OrderDate column to the report, everything works fine. But as soon as I add the OrderID or OrderDate column, the application crashes.
    Culprit seems to be MSVCR80.dll. Here's the log:
    Faulting application name: crw32.exe, version: 12.3.0.601, time stamp: 0x4bd05d31
    Faulting module name: MSVCR80.dll, version: 8.0.50727.4927, time stamp: 0x4a2752ff
    Exception code: 0xc000000d
    Fault offset: 0x00008aa0
    Faulting process id: 0x1944
    Faulting application start time: 0x01cb0139cfafeb40
    Faulting application path: C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
    Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\MSVCR80.dll
    Report Id: 3b28c990-6d2d-11df-b9d8-00080d72c9f2
    Suggestions? Thanks in advance.

    Hello,
    It may be that something was "fixed" and our default xml file falls out of the Standards now.
    Are you wanting to connect to SQL or XML?
    Go to Microsoft's site and search for C++ distribution and download and install the recommended one for windows 7. It may be that part is corrupt or our installer thinks it is there. Try doing a Repair install and custom options to select all of the DB drivers and exports types to see if that resolves the issue.
    Thank you
    Don

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem " This has been going on for several days, I've had to go back IE to access web pages

    When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • Microsoft Windows - Intrastat Has Stopped Working error message...

    Hi Experts,
    When running the Intrastat Declaration Report the following error window box pops up:
    Microsoft Windows
    Intrastat For Business One Has Stopped  Working
    Windows can check online for a solution to the problem
    -> Check on line for a solution and close the program
    -> Close the program
    Problem Signature:
    Problem Event Name:  BEX
    Application Name: BN_Intrastat.exe
    Application Version: 8.80.229.0
    Application Timestamp: 4db5952d
    Fault Module Name:  MSVCR80.dll
    Fault Module Version:  8.0.50727.4053
    Fault Module Timestamp:  4a594c79
    Exception Offset:  0000eb46
    Exception Code:  c000000d
    Please can you help me with this one please?
    It's SAP 8.8
    Many thanks in advance for any help!
    Caroline

    Hi Caroline,
    Your question belongs to 3rd arty add-on forum. I will move it there after few days.
    To give you a tip: try restart everything to see if problem could be gone away. If not, you have to do a clean reinstall for the add-on.
    Thanks,
    Gordon

  • For no reason when I try to sync my iPad I get a message after about 10 minetes sayingitunes has stopped working windows will get back to you if a solution is found.I used to be able to sync no problem this just started all of a sudden

    I get a message every time I truro sync it says iTunes has stopped working windows will contact you if a solution is found.

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • Skype 7.7.103 'Skype has stopped working' - Windows 7

    I have tried solutions offered by similar posts, but have failed to come up with a solution that works.   http://community.skype.com/t5/Windows-desktop-client/Skype-7-7-has-stopped-working/m-p/4055780#M357080 I have a newly built PC with Windows 7, and when we upgraded to Skype 7.7, it has consistantly given the "Skype has stopped working" message every time I try to use it. I have my DxDiag results attached. Here is the error log entry from my Event Viewer...Faulting application name: Skype.exe, version: 7.7.64.103, time stamp: 0x55b7d8d0
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18869, time stamp: 0x556363bc
    Exception code: 0xe06d7363
    Fault offset: 0x0000c42d
    Faulting process id: 0x15e8
    Faulting application start time: 0x01d0d2f5e88be243
    Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll Any help would be greatly appreciated.  Thanks! 

    teflontree wrote:
    Faulting application name: Skype.exe, version: 7.7.0.103, time stamp: 0x55b7d8c2Faulting module name: KERNELBASE.dll, version: 6.1.7601.18869, time stamp: 0x556363bc
    Exception code: 0xe06d7363
    Fault offset: 0x0000c42d
    Faulting process id: 0x848
    Faulting application start time: 0x01d0d476203aae3f
    Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: 63e01523-4069-11e5-af32-902b3439af4c Thanks for your time and help with thisThe same error message as here, so the solution will also be the same. http://community.skype.com/t5/Windows-desktop-client/Skype-7-7-103-Skype-has-stopped-working-Windows-7/m-p/4077205#M361163

  • ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  Why?!

    For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  I am using Windows 7 on my 64-bit computer.  iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups.  It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me".  Why can't I sync these photos, and what can I do?  Thanks so much for the help, I really appreciate it!

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

    Two months ago, I bought a new computer that uses Windows 8.  I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason.  Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message.  I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details.  I've tried installing it as an administrator, but got same failed results.
    Any help?
    Thanks, Mike

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • Windows 7 - 'iTunes Has Stopped Working' Window Repeatedly Popping Up

    Hi there, I've encountered a problem that I couldn't fix myself so I'm hoping someone can impart with some knowledge.
    The dreaded 'iTunes has stopped working' window pops up constantly, and continues to reappear again and again. Even navigating to this forum, finding the right place to post and typing this very question is a pain as it has popped up about 7 times since I started typing it. If I leave my laptop alone for a few minutes, I come back and there's about 15 windows open saying the same thing. This is super annoying as I'm trying to get some work done, but any ounce of productivity I have is stifled by this. I am very close to headbutting the screen before I throw my laptop into oncoming traffic on the street below.
    I've tried restarting the system, shutting it down and leaving it off for a bit, ending any iTunes-related processes in Task Manager but all have failed.
    I'm using Windows 7 Home Premium 64-bit SP1
    HP Pavilion G6 
    4GB RAM
    Any help will be greatly appreciated, thanks.

    Hi there 46Villan,
    I understand that you are seeing an issue with iTunes for Windows and you are getting a recurring error message on your computer. I understand how this would be frustrating to you and would stifle productivity. In order to help you troubleshoot this issue, I suggest that you perform the steps found in the following article:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    If the issue continues after attempting those steps, you may need to consider uninstalling then reinstalling iTunes and its related components completely:
    Remove and Reinstall iTunes and other software components from Windows XP - Apple Support
    http://support.apple.com/en-us/ht1925
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Itunes has stopped working Windows is checking for a solution ....

    After I just upgrade my itunes and restart the computer I click on itunes and get a message itunes has stopped working Windows is checking for a solution to the problem….’ This is then followed by another message ‘a problem caused the programme to stop working correctly. Windows will close the program and notify you if a solution is available.’
    I try to open in "safe mode" and getting the same message.
    I am trying to figure out what to do about my son's itouch he has lost it/stolen at school. Feeling worried and would like to be able to get in my itunes account now.

    This is the simplest fix, if you're still having a problem with it.  I had the same problem, am running Windows 8.1.  Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    Let me know if you have a problem.

Maybe you are looking for