APPCRASH javascripcore.dll ITunes is dead
ITunes is dead. It now only runs about 10 seconds and gives me APPCRASH fault module name JavaScriptCore.dll. I have uninstalled itunes, deleted all itunes folders, and i still have this error. Really could use some help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the "(64-bit - for older video cards)" release as a workaround for performance issues.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Similar Messages
-
Itunes updated now it crashes APPCRASH, ntdll.dll
Help Please...
Downloaded the latest i-tunes and ever since it loads up and faults with an APPCRASH
Ive tired everything i can think of unistalled all apple software i can find, reg clean up's, older versions of itunes, nothings seems to help
This is the attached error message im running Vista on a Acer laptop
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.2.11
Application Timestamp: 4ee0844d
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Fault Module Timestamp: 4cb73436
Exception Code: 80000003
Exception Offset: 0004884e
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160There are many factors causing ntdll.dll crash in WIndows.
Hardware failure could be one of them. Please check your harddrive for file allocation errors and/or bad sectors and memory errors.
To check for hard disk errors (This may take hours)
Open Computer by clicking the Start button , and then clicking Computer.
Right-click the drive that you want to check, and then click Properties.
Click the Tools tab, and then, under Error-checking, click Check now. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will report problems but not fix them.
To perform a thorough check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the drive itself, and it can take much longer to complete.
To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
Click Start. The Check will start automatically when you restart Windows.
To check for memory problems
Open Memory Diagnostics Tool by clicking the Start button , and then clicking Control Panel. In the search box, type Memory, and then click Diagnose your computer's memory problems. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Choose when to run the tool. If you choose to restart your computer and run the tool immediately, make sure that you save your work and close all of your running programs. The Memory Diagnostics Tool will run automatically when you restart Windows. -
Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e3fb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button. -
hi tryed reistalling itunes drivers repairing itunes etc any help would be greatly apreciated thankyou..
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
11.0.1.12
Application Timestamp:
50c8fc7e
Fault Module Name:
MSVCR80.dll
Fault Module Version:
8.0.50727.6195
Fault Module Timestamp:
4dcddbf3
Exception Code:
c0000005
Exception Offset:
0001500a
OS Version:
6.0.6002.2.2.0.768.3
Locale ID:
1033
Additional Information 1:
fd00
Additional Information 2:
ea6f5fe8924aaa756324d57f87834160
Additional Information 3:
fd00
Additional Information 4:
ea6f5fe8924aaa756324d57f87834160Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
i m using window vista32 after itunes upgrade.. itunes crash ..
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.4.62
Application Timestamp: 52ddbf7a
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062086
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 16393
Additional Information 1: a183
Additional Information 2: 96f68295953afa2675d1551e001cfa2f
Additional Information 3: 5630
Additional Information 4: 5482da5e28e2dc79b1d40bd90d8c9bFault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Even if you don't have any third-party plug-ins or add-ons, try opening iTunes in safe mode as per the instructions in the following document:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
If iTunes opens in safe mode, quit iTunes and then try launching it again normally. Does it launch without the error messages this time? -
Appcrash after installing itunes 12.1.1.4. Program won't open
I have been running itunes on this PC for some time with no problems. After installing the most recent update, itunes crashes and won't open. I have tried running as administrator and have uninstalled all Apple software and did fresh installs. All to no avail. Here is my error information:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 12.1.1.4
Application Timestamp: 54de1991
Fault Module Name: CoreAudioToolbox.dll
Fault Module Version: 7.9.9.6
Fault Module Timestamp: 54ddd41b
Exception Code: c000001d
Exception Offset: 00000000001fa332
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 766c
Additional Information 2: 766ce7c83c720b37be52f12645350d2d
Additional Information 3: 6b95
Additional Information 4: 6b95366109546ef6cf86035405f46cca
I'd sure like some help with this one! Thank you.Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help meFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127
See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2 -
Nome evento problema: APPCRASH
Nome applicazione: iTunes.exe
Versione applicazione: 11.1.4.62
Timestamp applicazione: 52ddbf7a
Nome modulo con errori: StackHash_1025
Versione modulo con errori: 6.0.6002.18881
Timestamp modulo con errori: 51da3e27
Codice eccezione: c0000374
Offset eccezione: 000b06fc
Versione SO: 6.0.6002.2.2.0.256.6
ID impostazioni locali: 1040
Informazioni aggiuntive 1: 1025
Ulteriori informazioni 2: 491df5c84464b99ef8f61e542b4c9ce4
Ulteriori informazioni 3: 9ade
Ulteriori informazioni 4: 7f7b00bf8397fb6909813f504d7de648Nome evento problema:
APPCRASH
Nome applicazione:
Adobe Premiere Pro.exe
Versione applicazione:
5.0.3.0
Timestamp applicazione:
4ce382d1
Nome modulo con errori:
StackHash_8659
Versione modulo con errori:
6.1.7601.18247
Timestamp modulo con errori:
521eaf24
Codice eccezione:
c0000374
Offset eccezione:
00000000000c4102
Versione SO:
6.1.7601.2.1.0.256.48
ID impostazioni locali:
1040
Informazioni aggiuntive 1:
8659
Ulteriori informazioni 2:
865914f2b0aba0a7f763eb3f160d9c9b
Ulteriori informazioni 3:
5def
Ulteriori informazioni 4:
5defc8630ba14d9bda1ae72188ae0e03@
E' da quando ho istallato il plug-in Heroglift della Pro-Dad
Fino ad ora con istallati: Magic Bullet, New Blue, ProDad Vitascene e Boris non mi aveva dato eccessivi problemi.
Qualcuno ha avuto la stessa triste esperienza? Grazie e spero qualcuno possa aiutarmi -
Adobe premiere elements organizer appcrash msvcr90.dll windows 7
adobe premiere elements 11 organizer appcrash msvcr90.dll. Hoe dit oplossen ?
paulv
Elements Organizer 11 on Windows 7 (assumed 64 bit).
When did you post this question before today. If all you posted today is all you sent in this thread, then be advised that this is not Adobe. Rather user to user. The replies are not automatic and depend
on a reply from a user based on the use's personal schedule.
I am not sure if the following will target the "msvvcr90.dll" but consider the following for the "crash" aspects
1. Delete the Elements Organizer 11 settings file named psa.prf found
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the Elements Organizer 11 will stay open long enough, create a new catalog.
See Elements Organizer 11 File Menu/Manage Catalog/Catalog Manager.
3. Some times certain formats can bring the Elements Organizer down. What kind of files have you been
importing into the Elements Organizer and are the crashes associated with certain source files?
ATR -
Itunes crash APPCRASH msvcrt.dll
Hi
recenlty my itunes is crahsing at launch. the error i get is APPCRASH, fault: msvcrt.dll.
i tired several times to remove all itunes, quicktime etc... according to the procedure recommended by support but still not working.
i tried a registry fix as well, and cannot do a windows repair as my orginal CD is windows 7 and i upgrade to SP1 and now when i try to repair windows, it is telling me that it cannot do it as i have a newer verison installed.
i am using win 7 64-bit. and using latest version of itunes 10.6.
any help is very much appreciated as i am really stuck!!!
cheersNo one experienced this or knows what i shold do?
ANY help greatly appreciated! -
Please help me solve this problem.
I get the appcrash when i pause my the downloding apps...and i cant really understand why everytime i open my itunes the music files video and app were missing and i have to insert them over and over again when i want to sync my ipad..this problem actually happened before i got my ipad2 that time im using my ipod touch..i hope u can help me solving this problem :)
-
Seit dem letzten update kann ich itunes nicht mehr starten. Fehlermeldung: nicht gefunden MSVCR80.dll und error 7 (Windows 126)
See TS5376(DE): iTunes 11.1.4 für Windows: Installieren oder Öffnen nicht möglich.
tt2 -
Hello everyone,
I have download and installed a trial license of BOBJ 3.1, i have installed an SAP INT Kit and have been trying to convert some sample CR from the SAP servers " iwdfvm..." to a local SAP Server on the network. I receive this error in crystal reports when i try to update the data source
Problem Event Name: APPCRASH
Application Name: crw32.exe
Application Version: 12.2.6.567
Application Timestamp: 4ba3856d
Fault Module Name: crdb_opensql.dll
Fault Module Version: 12.1.0.890
Fault Module Timestamp: 48db6ad0
Exception Code: c0000005
Exception Offset: 000aea07
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Please help me understand why i can not change any of the datasources. The funny thing is this error has popped up in every version of CR and there are still no fixes that i have seen in 2008.Hello everyone I have downgraded to the SP1 version of Crystal Reports 2008 seems to have fixed the problem.
-
I had my iPod nano hooked up to a Dell laptop with iTunes. Of course the laptop went dead and now I don't know how to get the music from the nano to my iPad?
Anyone have any ideas or instructions to assist?Hi,
You music is not in your iCloud account, it is in iTunes in the Cloud. Whether you use iCloud personally or not, it will not have an effect on the iTunes in the Cloud functionality. If you are using iTunes, then all of your purchases through iTunes will use iTunes in the Cloud as a backup for your purchases.
Cheers,
GB
Maybe you are looking for
-
Formatting - How to print a frame on the bottom of the last page ?
I have a summary frame for my report. I want to print the summary information at the bottom of the last page of the report. Currently depending on the data, the summary frame prints anywhere on the last page. How do I make sure it prints exactly at t
-
I've never used this feature to ask a question. Pardon not knowing etiquette and such. When I click on Creative Cloud logo/icon on my desktop, the indicator for time passing goes for a few seconds and stops, but CC app not opening. CC app used to
-
Has anybody implemented SUS in SRM 5 - Extended classic - pls help
Hi There, I would like to hear from anybody who has implemented SUS in SRM 5 - Extended Classic. A client of mine is considering implementing SUS - SRM 5. I cannot find any SAP SUS related docuemntation for the Extended Classic scenario. Do you have
-
SAP Business Objects 4.1 - American Date Format Issue
This issue is something that keeps arising, if your viewing a crystal report, or building a new Webi report in 4.1 and viewing it, the date format seems to come out as M/D/YYYY HH:MM:SS, this never happened in 4.0. I will give an example, today I upd
-
Help creating browse sequences that work and deleting sync TOC
Hi, I'm using the latest version of the TCS with RH 9.0. I'm trying to create WebHelp Pro output for a book produced originally in Framemaker. I've been following Rick's Skinny on skins guide to tailor the look and feel, but am having real problems g