APPCRASH problem

Hope someone can help. I use Vista Home Premium. I can open
some .htm files but I get a message that DW CS3 has stopped
working. The details are below:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Dreamweaver.exe
Application Version: 9.0.0.3453
Application Timestamp: 45dc22c4
Fault Module Name: SWFFile.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 46005ceb
Exception Code: c0000005
Exception Offset: 000014f8
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 1408
Additional Information 2: ff0d25f33f25db708157a94a72eb7055
Additional Information 3: e50e
Additional Information 4: 5884d087550981989b4e6d4494addb3b
Can anyone help me resolve this problem?

raysyms,
> Fault Module Name: SWFFile.dll
The crash is happening in the Flash code. If you can get DW
to start at
all, turn off the Welcome Page: click "Don't show again"
checkbox, or:
Preferences > General > Show Welcome Screen
HTH,
Randy

Similar Messages

  • APPCRASH PROBLEM IN WINDOWS 7

    I had APPCRASH problem for the last few days.  Even after formatting my system also, I had the same problem.
    Here is the problem description
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Ruby.exe
      Application Version:    8.9.5.3
      Application Timestamp:    5220d1eb
      Fault Module Name:    Ruby.exe
      Fault Module Version:    8.9.5.3
      Fault Module Timestamp:    5220d1eb
      Exception Code:    80000003
      Exception Offset:    0017dbda
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

    Hi,
    As I known, Ruby.exe is a executable file (a program) for Windows. The filename extension .exe is the abbreviation for executable. Only run executable files from publishers you trust, because executable files can potentially change your computer settings
    or harm your computer. The free file information forum can help you determine if ruby.exe is a virus, trojan, spyware, or adware that you can remove, or a file belonging to a Windows system or an application you can trust.
    Please note: Some malware camouflages itself as ruby.exe. Therefore, you should check the ruby.exe process on your PC to see if it is a threat.
    Since I cannot find detailed information about this application, I would like to suggest you try the following steps to check the issue:
    1. Uninstall the application that is crashing.
    2. Update your antivirus software definition and perform a full disk scan.
    3. Reinstall the application that was crashing. Now that the corrupted files have all been removed, your program should run smoothly after reinstallation.
    4. Check for application incompatibility. The application you are trying to use may not be compatible with your operating system or other programs on your computer.
    Meanwhile, I would like to share the following link with you:
    What is ruby.exe ?
    http://processchecker.com/file/ruby.exe.html
    Please note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

    i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys??  i don't know what to do..

    Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
    Cheers!
    -Bryan

  • When opening a PDF I get a APPCRASH problem

    Im unable to open a PDF, the doc opens up but then closes very shortly afterwards, the problem is as follows
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: AcroRd32.exe
      Application Version: 11.0.10.32
      Application Timestamp: 547e9779
      Fault Module Name: AcroRd32.exe
      Fault Module Version: 11.0.10.32
      Fault Module Timestamp: 547e9779
      Exception Code: 40000015
      Exception Offset: 000e2f57
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 1033
      Additional Information 1: c37e
      Additional Information 2: c37eace044c7ca1363ee7c4cfb11aae7
      Additional Information 3: d9f6
      Additional Information 4: d9f66b0958125a38ecce91544b0025a9

    Duplicate topic https://forums.adobe.com/thread/1668761

  • 9.3.4 export functionality results in APPCRASH

    Item #1 might not be germaine to the issue, but...
    1. App version discrepancy:
    Windows APPCRASH problem details dialog indicates version 9.3.3.177
    Complete "Problem Detail" text:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Acrobat.exe
    Application Version: 9.3.3.177
    Application Timestamp: 4c1d77c5
    Fault Module Name: StackHash_4bbe
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000374
    Exception Offset: 000afaf8
    OS Version: 6.0.6002.2.2.0.256.1
    Locale ID: 1033
    Additional Information 1: 4bbe
    Additional Information 2: c703abf76aa5986ccce979fe60f50061
    Additional Information 3: e7b2
    Additional Information 4: 667563a597f2ff288d6b435ff860bcec
    2. This APPCRASH also happens when trying to "select all"; "Copy As Table", "Save AsTable..." or "Open Table In Spreadsheet"
    3. OS is Windows Vista Ultimate 32 bit
    Not sure what other information would be helpful to troubleshoot this problem.

    add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

  • Elements 13 crashes before it starts! APPCRASH

    Hey Community,
    yesterday I refresh my system and copied the favorite Programms. All of them running, also lightroom 5.7 64bit. But when I want to start elements 13, I get the error message:
    Problemsignatur:
      Problemereignisname:    APPCRASH
      Anwendungsname:    Photoshop Elements 13.0.exe
      Anwendungsversion:    13.0.0.0
      Anwendungszeitstempel:    54023988
      Fehlermodulname:    Photoshop Elements 13.0.exe
      Fehlermodulversion:    13.0.0.0
      Fehlermodulzeitstempel:    54023988
      Ausnahmecode:    c0000005
      Ausnahmeoffset:    0000000000041709
      Betriebsystemversion:    6.1.7600.2.0.0.768.3
      Gebietsschema-ID:    1031
    My operating system is win7 home premium 64bit. Do you knwo how to repair this APPCRASH problem?

    Hi,
    Please first rename the following files and then launch PSE Editor again.
    1. C:\ProgramData\Adobe\Photoshop Elements\13.0\ThumbDatabase.db3
    2. C:\ProgramData\Adobe\Photoshop Elements\13.0\Locale\en_US\MediaDatabase.db3
    Please let me know if this doesn't work.
    Thanks,
    Swapnil

  • Important Publishing Problem..

    Hi everyone.
    I'm creating a flash based game.But i faced many problems.I'm using CS5 but on recent days when i try to open CS5 i faced APPCRASH problem.   I tried publishing on CS4 it created new problems. I finished my game's important parts but i have 2 parts which didn't finished.I uploaded that files and i'm waiting you to publish for me.
    I'm waiting for your helps.Thanks..
    http://uploading.com/files/fee7be1a/market01_tr.rar/
    http://uploading.com/files/12fec6c5/kulupBinasiz_tr.rar/

    Hey guys !
    That job is too easy for you and too important for me.I'm waiting for your help..Please.

  • Dreamweaver 6 Win 7 Ultimate x64.  Crashes /Hangs when using site|New Business Catalyst Site...

    Hi all,
    I hope someone can help me here.
    I have installed Dreamweaver 6 on windows 7 Ulitmate X64.  I have also installed patches 12.0.2 & 12.0.3.  (My current version is 12.0 Build 5861)
    When I navigate through the menus
    Site | New Business Catalyst Site...
    The dialog appears and the application grays out.  Then it will sit with the timer until I click on the blank dialog.  At which point Windows performs an APPCRASH
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Dreamweaver.exe
      Application Version:          12.0.3.5861
      Application Timestamp:          50be54e4
      Fault Module Name:          KERNELBASE.dll
      Fault Module Version:          6.1.7601.18229
      Fault Module Timestamp:          51fb1116
      Exception Code:          e06d7363
      Exception Offset:          0000c41f
      OS Version:          6.1.7601.2.1.0.256.4
      Locale ID:          2057
      Additional Information 1:          7fdd
      Additional Information 2:          7fddb5d7ac5be2d68e8c7847b585232e
      Additional Information 3:          6544
      Additional Information 4:          6544ff2b28432e179aaa41ed0f3a3030
    Thank you advanace
    Huet

    Does BC require any special ports open inbound for it to work.  I have managed to get it working on a DW 5 install with the BC plugin but on a different machine!  Still no joy with DW6 :-(

  • ITunes 10.4 Update keeps crashing

    I allowed the update to 10.4 yesterday and iTunes now crashes everytime I open it. The crashes are intermittent and the first sign just before a crash the scroll bar freezes then Windows says that it needs to close iTunes. The event viewer displays the following information:
    Log Name:      Application
    Source:        Application Error
    Date:          7/23/2011 9:56:40 PM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Chris-PC
    Description:
    Faulting application name: iTunes.exe, version: 10.4.0.80, time stamp: 0x4e262cf4
    Faulting module name: WebKit.dll, version: 7534.50.0.1, time stamp: 0x4e056f6c
    Exception code: 0xc0000005
    Fault offset: 0x001f2a69
    Faulting process id: 0x1ba4
    Faulting application start time: 0x01cc49aacd439140
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll
    Report Id: 8d5bcdad-b5a0-11e0-9f14-7a8020000200
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-07-24T02:56:40.000000000Z" />
        <EventRecordID>26960</EventRecordID>
        <Channel>Application</Channel>
        <Computer>Chris-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>iTunes.exe</Data>
        <Data>10.4.0.80</Data>
        <Data>4e262cf4</Data>
        <Data>WebKit.dll</Data>
        <Data>7534.50.0.1</Data>
        <Data>4e056f6c</Data>
        <Data>c0000005</Data>
        <Data>001f2a69</Data>
        <Data>1ba4</Data>
        <Data>01cc49aacd439140</Data>
        <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
        <Data>C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll</Data>
        <Data>8d5bcdad-b5a0-11e0-9f14-7a8020000200</Data>
      </EventData>
    </Event>
    Does anyone know where I can download iTunes 10.3 from?

    Having the same problem with iTunes 10.4 and followed the Apple Support Doc to uninstall iTunes and all its componets on Windows 7 x64. Re-installed everything and tried to re-sync my iPhone and its still causing the sync or APPCrash problem below.
    Faulting application name: iTunes.exe, version: 10.4.0.80, time stamp: 0x4e262cf4
    Faulting module name: iTunes.dll, version: 10.4.0.80, time stamp: 0x4e262cc3
    Exception code: 0xc0000005
    Fault offset: 0x00cf55aa
    Faulting process id: 0x690
    Faulting application start time: 0x01cc4e7ed01dee6c
    Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: D:\Program Files (x86)\iTunes\iTunes.dll
    Report Id: 47b6a64d-ba72-11e0-996b-000272d5a3a4
    I also noticed this error after the Application Error in the event log. As though it was trying to sync but getting these mutiple errors.
    244: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    340: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    424: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    504: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    548: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    556: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    Most of these errors are pointing to some Microsoft article about chaning the Bonjour Service from autmatic to manual but that did resolve my issue.

  • My computer running on Windows 7 blue screens often whenI use Firefox since I installed latets version

    I have been using Mozilla for a long time. On one computer where I am running Windows 7, I suddenly started having problems after I downloaded the latest upgrade to Firefox 7.0.1 . not only does silverlight not work-always crashes, but firefox often (several times a day) stops responding and my computer blue screens. None of this was happening until this latest upgrade.
    I am not currently sending this from my computer with the problem because I cannot get Firefox to open

    Updating this thread...
    I see some people talking about Forms 6i and SQL Plus crashing when connecting to a database:
    APPCRASH Problem for plus80 and forms 6i builders
    Forms Developer 6i will crash if you try connecting to a database running the AL32UTF8 character set. Older systems require the UTF8 character set.
    Here are several very old threads with similar issues:
    <p>connecting form 6i  to oracle database 10G express edition
    <br>Forms 6i X 10g Database (the solution is here)
    More info: In Windows 7, I am running Forms 6i WITHOUT compatibility mode set to XP. It all seems to be running fine. I have had no problems with it since I first installed last year.
    Unfortunately, I don't have an Oracle 11 database available to try connecting to. I have only used this setup with Oracle 9 and 10 databases.

  • ITunes 10.4 (80) keeps losing/deleting song files

    As the topic title says, since downloading the most recent update to iTunes, (about 4 days ago) I have had to re-Add to Library several albums and Podcasts after the initial files disappeared.
    Is anyone else experiencing similar issues?

    Having the same problem with iTunes 10.4 and followed the Apple Support Doc to uninstall iTunes and all its componets on Windows 7 x64. Re-installed everything and tried to re-sync my iPhone and its still causing the sync or APPCrash problem below.
    Faulting application name: iTunes.exe, version: 10.4.0.80, time stamp: 0x4e262cf4
    Faulting module name: iTunes.dll, version: 10.4.0.80, time stamp: 0x4e262cc3
    Exception code: 0xc0000005
    Fault offset: 0x00cf55aa
    Faulting process id: 0x690
    Faulting application start time: 0x01cc4e7ed01dee6c
    Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: D:\Program Files (x86)\iTunes\iTunes.dll
    Report Id: 47b6a64d-ba72-11e0-996b-000272d5a3a4
    I also noticed this error after the Application Error in the event log. As though it was trying to sync but getting these mutiple errors.
    244: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    340: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    424: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    504: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    548: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    556: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    Most of these errors are pointing to some Microsoft article about chaning the Bonjour Service from autmatic to manual but that did resolve my issue.

  • Forms 6i, blocks and rowtype

    Is there a way to base a block on a table or view and then reference the data locally via a %rowtype. If my block has 25 items and I want to have a database procedure do the updates to the table, I can create the procedure to accept the 25 columns as parameters, or I can pass in a pl/sql table or record. If I want to pass in a record or pl/sql table, what's the easiest way to populate the pl/sql table or record. Can I reference the table name via the %rowtype and access the local values?
    Thanks

    Updating this thread...
    I see some people talking about Forms 6i and SQL Plus crashing when connecting to a database:
    APPCRASH Problem for plus80 and forms 6i builders
    Forms Developer 6i will crash if you try connecting to a database running the AL32UTF8 character set. Older systems require the UTF8 character set.
    Here are several very old threads with similar issues:
    <p>connecting form 6i  to oracle database 10G express edition
    <br>Forms 6i X 10g Database (the solution is here)
    More info: In Windows 7, I am running Forms 6i WITHOUT compatibility mode set to XP. It all seems to be running fine. I have had no problems with it since I first installed last year.
    Unfortunately, I don't have an Oracle 11 database available to try connecting to. I have only used this setup with Oracle 9 and 10 databases.

  • OVI Suite crashes when connected e71 on bluetooth ...

    Hi,
    I'm using OVI Suite 2.1.1.1 on windows Vista and a Nokia e71-3 400.21.013.
    If my e71 is connected over bluetooth and I move out of range and back in, ovi Suite crashes with the following error. http://twitpic.com/1qtb4l
    Crash Dump in textual format:
    Problem Event Name: APPCRASH
    Problem Event Name: APPCRASH
    Application Name: NokiaOVISuite.exe
    Application Version: 2.1.1.1
    Application Timestamp: 4b857b2b
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000420
    Exception Offset: 000afaf8
    OS Version: 6.0.6002.2.2.0.256.6
    Local ID: 3081
    Additional Information 1: ab3d
    Additional Information 2: 9a1ad9a8a2f7b6c4eb46309f1b433c26
    Additional Information 3: 3817
    Additional Information 4: 6021944cbd0ff759eesf56e975e24b88
    Problem Event Name: APPCRASH
    Application Name: NokiaOVISuite.exe
    Application Version: 2.1.1.1
    Application Timestamp: 4b857b2b
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000420
    Exception Offset: 000afaf8
    OS Version: 6.0.6002.2.2.0.256.6
    Local ID: 3081
    Additional Information 1: ab3d
    Additional Information 2: 9a1ad9a8a2f7b6c4eb46309f1b433c26
    Additional Information 3: 3817
    Additional Information 4: 6021944cbd0ff759eesf56e975e24b88
    Attachments:
    ovicrash.jpg ‏60 KB

    Hi,
    I'm using OVI Suite 2.1.1.1 on windows Vista and a Nokia e71-3 400.21.013.
    If my e71 is connected over bluetooth and I move out of range and back in, ovi Suite crashes with the following error. http://twitpic.com/1qtb4l
    Crash Dump in textual format:
    Problem Event Name: APPCRASH
    Problem Event Name: APPCRASH
    Application Name: NokiaOVISuite.exe
    Application Version: 2.1.1.1
    Application Timestamp: 4b857b2b
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000420
    Exception Offset: 000afaf8
    OS Version: 6.0.6002.2.2.0.256.6
    Local ID: 3081
    Additional Information 1: ab3d
    Additional Information 2: 9a1ad9a8a2f7b6c4eb46309f1b433c26
    Additional Information 3: 3817
    Additional Information 4: 6021944cbd0ff759eesf56e975e24b88
    Problem Event Name: APPCRASH
    Application Name: NokiaOVISuite.exe
    Application Version: 2.1.1.1
    Application Timestamp: 4b857b2b
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000420
    Exception Offset: 000afaf8
    OS Version: 6.0.6002.2.2.0.256.6
    Local ID: 3081
    Additional Information 1: ab3d
    Additional Information 2: 9a1ad9a8a2f7b6c4eb46309f1b433c26
    Additional Information 3: 3817
    Additional Information 4: 6021944cbd0ff759eesf56e975e24b88
    Attachments:
    ovicrash.jpg ‏60 KB

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • Problem Event :APPCRASH=Application:iTunes.exe=Fault Module QuickTime.qts

    Dear Friends,
    When i usb-connect my iphone to computer, i-tunes opens and says "ITUNES HAS STOPPED WORKING" and it shuts down.
    If any body faced this problem, Please advice me how to connect to itunes, i cannot upload or download anything from iphone. iam stuck with this.
    this started happening after I-tunes got updated.
    I HAD UN-INSTALLED AND RE-INSTALLED ITUNES,QUICKTIME COUPLE OF TIMES, STILL SAME ERROR.
    please see below the details of this errors
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 8.0.2.20
    Application Timestamp: 4925c4fe
    Fault Module Name: QuickTime.qts
    Fault Module Version: 7.60.92.0
    Fault Module Timestamp: 49628b19
    Exception Code: c0000005
    Exception Offset: 00a02227
    OS Version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 720c
    Additional Information 2: 87abfdde4e44868a2d32f6948e899598
    Additional Information 3: f90e
    Additional Information 4: 9e28fae53134737dc3d52f78b3058022
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    same error on windows-xp and vista.
    it used to work fine before the itunes updates.
    Thankyou.
    Shankar

    I had this same problem, and to solve it I had to remove iTunes and revert back to older version. Also, when you do this, you have to remove the iTunes Library.ilt file or else you will get an error message saying it was created with a newer version of iTunes. So what I'm trying to say is don't install the iTunes 8.1 update just yet.

Maybe you are looking for