AppDiscovery did not discover all SCCM Applications

Hello,
I have a problem with the appdiscovery from mdt 2013.
i use mdt with sccm 2012 r2 Integration.
In my UDI Tasksequence the appdiscovery only discover Software that are installed with msi.
Scripted Software installations are not discovered.
The WMI Application History in the appdiscovery.log is empty.
Thanks for help

Hi..
Follow the instrucitons here > OS X Lion: About Lion Recovery
At that link see: Restoring iLife applications after Internet Restore of OS X Lion

Similar Messages

RAC11.2 EMGC 11.1 node did not discover ASM

Hi,
we installed a two node RAC with ASM and grid infrastructure on OEL. On system level grid and db runs fine.
#>crsctl stat res -t --> all ok.
We deploy the agents form EMGC 11.1the installation was finish successfully.
On node one the agent discover all components form the node...host, +ASM1, LISTENER_node1, SCANS1,2
But on node two the agent did not discover +ASM2 and the LISTENER_node2.
All Passwords are the same on both nodes and provided to the EMGC11.1
In configuration tab in EMGC 11.1 all installations are found
Oracle Database 11g 11.2.0.2.0     /u01/app/oracle/product/11.2.0/dbhome_1 (OraDb11g_home1)     Jun 9, 2011 1:26:07 PM GMT
Oracle Grid Infrastructure 11.2.0.2.0     /u01/app/11.2.0/grid (Ora11g_gridinfrahome1)     Jun 9, 2011 12:23:31 PM GMT
Oracle Management Agent 11.1.0.1.0     /u01/app/oracle/product/agent11g (agent11g1)     Jun 14, 2011 1:14:26 PM GMT
node2 #>emctl status agent ---> agent OK heartbeat to OMS --> 2011-06......
Does anyone can help to find why the agent on node2 don´t find all components. Or how to tell agent to rediscover everything.
Thanks
*T

have you installed the agent in clustermode?
I can't tell you the reason why one agent has discovered the node completely and why the other hasnt't. Please compare the file target.xml (.../sysman/emd) from the fully discovered node with the the file target.xml of the other node. Do both contain the same amount of targets?
If not, you may edit this file on the node where the targets are missing (but be careful: you have ASM1 on node#1 and ASM2 on node #2).
And you certainly have to replace the hostname from node #1 with host-name of node #2. But before editing this file please shutdown the
agent and restart them afterwards. I know that this way is not supported or recommended by Oracle - but I have done that before and it worked
fine.
If you want to figure out why the targets on one node haven't been discovered please check the logfiles under .../sysman/log. Maybe you
find a reason. Any you could try "emctl stop agent", "emctl clearstate agent" and "emctl start agent"...

How do I recover photos from my AppleTV photo stream? when I reset my iPhone, I did not get all of my photos back. How do I get these photos off of my Apple TV?

how do I recover photos from my AppleTV photo stream? when I reset my iPhone, I did not get all of my photos back. How do I get these photos off of my Apple TV?

Hi MrRhea,
Welcome to the Apple Support Communities!
It sounds like you have photos in your Photo Stream that you would like to download. The photos are not actually stored on your Apple TV, it sounds like they are being displayed from your Photo Stream. Please read over the attached article for information on your Photo Stream and how to download these photos.
My Photo Stream FAQ - Apple Support
Because your Mac and PC have more storage than your iOS devices, you can choose to download all of your My Photo Stream photos automatically.
In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will import into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
On your PC with My Photo Stream on in the Control Panel, all of your photos will import intoC:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream
Best regards,
Joe

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

HT1535 i HAVE AN iPAD iii. iT HAS ABOUT 4000+ PHOTOGRAPHS. I bought a new PC. The IT company did NOT download all my pictures from the old drives to the new drive. I am afraid if I sync, I will lose all 4000 photos. Any ideas on how to upload those p

i HAVE AN iPad iii. iT HAS about 4000 photos on it. I just bought a new PC and the IT people did not copy all the photos from the old computer but they are all on my Ipad.
Is there a way to upload those photographs to ITUNES and have them stored on my computer. Or if I synch, will all those photos vaporize because they are not on my computer.

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

HT4914 I turned on iTunes Match, and subscribed; but it did not load all of my library. How can this be corrected so that I can recover all of my library?

I turned on iTunes Match, and subscribed; but it did not load all of my library. How can this be corrected?

iTunes Store: Subscribing to iTunes Match
After looking through the above link, and still doesn't help then try this below:
> iTunes Content: Downloading past purchases from App Store, iBookstore, and iTunes Store
> Non-iTunes Content: Transfer them from a different iDevice or from USB flash drive and/or external hard drive.
I don't use iTunes Match so I don't really know.
Message was edited by: keeferaf

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

You did not select all the docs belonging to the cross-co code transact Message no. F5876

Hello All,
When Cross company document is reversed with FBU8, Only one (1) leg is reversed and another (2) is not.
For internal audit purpose, when any document is reversed, User should attach some proofs and then he should reverse it.
When I tried to reverse only (2) leg through FBU8, I am getting this error – “You did not select all the docs belonging to the cross-co code transact Message no. F5876”.
Pls give me some inputs how to reverse (2) leg.
Thanks

Hello Kalim - I am getting error message. We can not make it to warning message, though we have option in OBA5.
Any other alternatives?
Thanks

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

If you had never saved the file at any time, you have lost your work.
Go to; Apple Menu > Force Quit
Start a new presentation, and from now on, after adding the first object to the slide, save the file.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Edge 2013 does not discover all Exchange servers in the org

We have the following co-existence setup:
Edge 2013 sitting on the DMZ.
1 CAS 2013
1 MBX 2013
1 CAS/HUB 2010
1 MBX 2010
After creating a new edge subscription on the edge server and successfully completing it on the 2013 mbx server, when I run get-exchangeserver on the edgeserver I get only the 2010 CAS and the 2013 MBX. 2010 MBX and 2013 CAS are missing.
All mailflow is working fine, yet if I shutdown the 2010 CAS, incoming mail flow stops, because for the edge server the 2010 CAS is the nexthopdomain, it doesn't find it and gives a 4.4.1 error in the SMTP receive protocol logs.
I have tried re-creating the subscription several times, I tried forcefullsync, it syncs fine yet it does not discover all the servers.
The firewall on the edge is disabled and in the internal servers as well, just to be sure that there is no communication error.
When the edge server receives an email from the internet it sends it to the 2010 CAS/HUB server and then to the 2013 MBX server.
Also the documentation from technet states the following for Edge and messages arriving from external senders.
Mailbox server and Client Access server installed on different computers In this configuration, the Client Access server is bypassed for inbound mail flow.
Mail flows from the Transport service on the Edge Transport server to the Transport service on the Mailbox server.
So in my config, the CAS should be bypassed, but yet that's not happening. The "proxy to a CAS server" option on the connectors is not enabled.
I believe all the above would be resolved, If I could make the Edge server discover all of the servers in the org.
Ideas?

Hi Dimitris,
Base on my knowledge, I think this is a normal behavior on Edge server. Since the computer that has the Edge Transport server role installed doesn't have access to Active Directory.
We will create an Edge Subscription from mailbox server(Exchange 2013) or hub server(Exchange 2010). So the Edge server will only connect to these servers with transport role.
According to the Edge Subscriptions document, it said:
“The Edge Subscription process provisions the credentials used to establish a secure LDAP connection between Exchange 2013 Mailbox servers and a subscribed
Edge Transport server.”
Edge Subscriptions
https://technet.microsoft.com/en-us/library/aa997438(v=exchg.150).aspx
Best regards,
Niko Cheng
TechNet Community Support

The apple store has changed my phone. But when I got the new one i did not have all the songs and apps that i bought. WOuld you please help me to retrieve them back to my iphone. thanks

The apple store has changed my I broken Iphone to a new one. But when I got it, i did not have all my purchased songs and apps in it.

You will need to plug it into your computer and re-sync them from iTunes. The iPhone is meant to be synced/backed up to iTunes on your computer on a regular basis. It is NOT a primary or backup storage device.

Just downloaded book but did not get all the way down now cant play it any answers

just downloaded book but did not get all the way down now cant play it any answers

in iTunes, access your purchase history via your account in the iTunes store, find the file in question, and click on the report a problem button. report the problem. more info in this support article.
clicking here should take you directly to your iTunes store log-in window.

Please helpJ2EE engine JCO did not reach the "starting application" state

Hi,
I get the following error "J2EE engine JCO did not reach the "starting application" state" when I try to install my Java components using SAP Development Studio.
When I checked my std_servero.out the get the following error
[GC 65868K->39262K(128320K), 0.0173335 secs]
[GC 65942K->39031K(128320K), 0.0071339 secs]
[GC Full GC[Unloading class com.sap.engine.customizing.ccms.CustomizePerformanceMTEObjectImpl0]
[Unloading class com.sap.engine.customizing.ccms.CustomizeSingleMessageMTEHomeImpl0]

Hello Santhi
The GC messages you see are just an indication of the garbage collector activity. It is not an error.
I'm not sure about what you are doing with the Developer Studio. I guess your WAS Java is already installed, is it right? Are you able to start the visual administrator? Please, paste here the exact error you receive.
Regards,
Désiré

Bundle purchase did not download all files

Bundle purchase did not download all files

Try the Store > Check For Available Downloads menu option.
Or try clicking on your name at the top right of your iTunes and then click Purchased on the popup
and see under Movies/Films for downloading.

AppDiscovery did not discover all SCCM Applications

Similar Messages

Maybe you are looking for