Appear/Fade not working in IE

Please help.  I'm using Dreamweaver CS4 and have used the appear/fade effect to fade-in a div of text links.  The links fade-in fine in all browsers, except IE, where they don't come through all the way and look blotchy.  Is there an IE workaround for this problem?  Thanks

Hi,
I'm not sure why the slide effect is not working but the blotchy text problem can be fixed by adding to the class or id the font-family: "MS Sans Serif"; in your css

Similar Messages

  • Motion tween- arrows not appearing, tween not working! please help?

    I select where I want my motion tween to be, ctrl-click and select 'create motion tween'. It appears blue, and does not come up with an error message but no arrows appear like in the video's and the motion tween has not worked. Any ideas why? Also, I opened up a file that already had a motion tween in it (made by somebody else) to test it. I selected the motion tween and clicked 'remove tween' and straight away clicked 'create motion tween' again- to put exactly the same motion back into it, but the same thing happens- the selected area appears blue but no motion tween. Then, if I select it again, the option is 'remove motion' not 'remove tween' as before. A little complicated and could really use some help! Thanks!

    Thanks very much for the help. Classic tween has worked, the arrows have appeared and the figure moves but the shapes do not move around their anchor points and go all over the place before suddenly appearin in the right position on the very last frame.This is a screenshot of what i see on the second to last frame:
    And this is the last frame:
    I made sure all the anchor points were in the right place beforehand, any ideas why the shapes wont move right?
    Thanks.

  • Flash CS4 Alpha Motion Fade Not Working In flashplayers 10

    Hi,
    I have a basic alpha motion fade which works using my flashplayer but not in flash players less than version 10 (no fade is present its just instantly there). If I change the player I am developing for in my movie settings the fade just does not work.
    Can anyone help with a solution?
    Chance
    SEO Scotland

    Hey there,
    Could you describe the setup or link a file with the problem?  I can't reproduce the problem with basic fades (obviously they should continue to work when you switch the player).  Is it just in the document you're working on, or all documents you create?
    Thanks,
    Jen.

  • [SOLVED] Cinnamon appearance settings not working.

    I have a strange problem concerning Cinnamon 2.2.0-1 from [community-testing], in which some appearance settings simply do not work. Specifically, I can't change icons or gtk theme, and making any change in cinnamon-settings has no effect whatsoever on the system. I've tried changing the appearance with lxappearance to some success - now the panel and some Gnome3 applications show the selected theme and icons, but the rest of the applications keep the old appearance settings. I have no .gtkrc files in my home folder and I start Cinnamon from LightDM.
    This is the output from running cinnamon-settings from a terminal:
    arachnid92 %> cinnamon-settings [~]
    ** (cinnamon-settings.py:3156): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    libupower-glib.so.1: cannot open shared object file: No such file or directory
    Failed to load module: /usr/lib/cinnamon-control-center-1/panels/libpower.so
    Could not find bluetooth module; is the cinnamon-control-center package installed?
    Could not find wacom module; is the cinnamon-control-center package installed?
    __init__ took 131.978 ms
    pacman -Q | grep cinnamon:
    arachnid92 %> pacman -Q | grep cinnamon [~]
    cinnamon 2.2.0-1
    cinnamon-control-center 2.0.9-1
    cinnamon-desktop 2.2.0-1
    cinnamon-menus 2.2.0-1
    cinnamon-screensaver 2.0.3-4
    cinnamon-session 2.2.0-1
    cinnamon-settings-daemon 2.0.8-6
    cinnamon-translations 2.0.3-1
    Last edited by Arachnid92 (2014-04-18 17:27:58)

    Confirming @Arachnid92's problem.
    I've got a whole raft of problems with the latest update, which I've listed here.
    EDIT: I'm going to wait until these two are updated before I start reporting bugs, purely because it may just be that not all the updates have been pushed at the same time.
    Last edited by clfarron4 (2014-04-14 22:38:40)

  • Audio fade not working in compound clip

    How are you doing? When I have a compound clip of multiple audio files, the fade handle doesn't seem to be affecting the audio like it did before the update.
    Below is an example...

    actually, that audio compound clip is not inside the compound clip. What you are seeing is multiple audio files compounded together. When I do this, the fade does not work. I can automate the level line, but the fade handles are ineffective.

  • Fade not working

    I cannot get fade out at the end of a clip; using the Rt click/Fade/fade Video out or Fade Audio out.
    I've consulted the manual and a search on "Fade" and "Fade in" brings up nothing relative to that menue option; it just talks about transitions.
    How does the option know what end to apply a Fade to?  It seems to be working on the front end of the clip on track 1, but not that back end.  How can I tell if a Fade has been applied to a clip, and how do I remove a Fade?
    I have a couple short clips on track 2 where the Fade; at the end of the clip, seems to be working.
    fyi the Audio/Visual in tracks 1 and 2 of my clips have been unlinked, and the audio has been removed from the clips on track 2. 

    Do you confirm that at this time, your only problem is with the one clip that you have targeted in your screenshot? I want to make sure of that so I am posting a mark up of your screenshot.
    If this is the case,
    Yes, that is the only clip that is refusing to respond to Fade.
    a. Can you add your own Opacity Keyframe at the end of that clip by holding down the Ctrl key of the computer main keyboard and clicking with your mouse cursor on the spot where you want the Opacity keyframe to go?
    Great!  I had no idea, that solves a lot of problems I've had with missing keyframes when I use Fade; which; seems to me, is just very squirrely! Look at some the wierd behaviours I've captured in the collection of screenshots!
    http://www.pixentral.com/show.php?picture=1tydAAiJnrMwOmFi34V6rc5G43z3us0
    To get around them I added transisitons and used the "Adjust" options.
    b. Have you been adding these Fades Video or Audio In and/or Out solely at the Timeline level by right clicking the video clip and selecting Fade followed by the wanted option?
    Yes
    what happens if you highlight the clip, go to Applied Effects Palette/Opacity Panel, expand the Opacity Panel to see its options, and click on the Fade Out there?
    This has been my work around.  When I do that I get the results I desire.  I think you suggestion of using the Ctrl key to put a keyframe in place will also help in working with the squirrely Fade feature.
    Another supportive information might be right clicking the video in its middle if you are indeed right clicking at the extreme right edge of the video for the Fade Out. You can right click the video at its beginning, select Fade Out, and still you will get the Opacity keyframe toward the end of that video.
    That's a good approach, but I'm pretty certain there are no "slivers"  I just went through and snipped specific locations in my sound track, then ran Fade on them; so there was no change for a "sliver".
    Well, I have finished my video and I am very happy with it.  Thanks for your patient support, as usual (-:  I have learned a lot in this effort, but you will; no doubt, be hearing from me again
    Here is the link to my Box; you can see my video there.
    https://www.box.com/s/z5z0rcp4xgd4vwfe1wgn

  • Fades not working on imported music

    I have just recently bought the iMac and created a 34 minute movie in iMovie. Everything was going great until just recently. I can't tell you why, but I all of the sudden lost the audio for most of the songs I had imported into my movie from ITunes. The green bars were still in my project, but the music wouldn't play back when I played the movie or skimmed over the clips. So, I have started deleting the music tracks and inserting these once again. However, an additional problem has arrived. When I import the music clips, I do get the sound back. However, the fades and audio adjustments do not seem to be working on these songs. In other words, I can insert these again to get the sound back, but I can't seem to add any effects to these through the audio adjustments window (i.e. fading, decreasing/increasing volume, etc.) The only two things I can remember doing that would have impacted the program right before this happened was to upgrade iTunes and choose to "clean up the selection" on my hard drive from the desktop. Does anyone know if either of these two things could have some how broke the links to the songs? If not, anyone have an idea of what happened? Does anyone know how I can get the audio adjustments to work on these songs again? HELP. I don't want to start over.

    Hi, Sachin_925. Since the access to Nokia Music is no longer available through the Nokia Music Player, downloading of songs using this computer (PC) app will not be supported. You can still download and listen to music files here: http://www.mixrad.io/
    Hope this helps.

  • Slide fade not working in Captivate 5

    Hello all -
    The project I'm creating requires fading in on slides. I've set the slides to fade, and when viewed the slides do not in fact fade. I've heard of a workaround that by accessing the dropdown menu under Transition and selecting another fade (which one is not relevant to the trick) that when fade is re-selected the fade behaves as expected. This hasn't been useful in this case. I've also cleared the cache thinking perhaps that would be helpful. This trick was also not a resolution.
    Thanks in advance to anyone with a suggestion to resolve this issue!

    Hello all -
    The project I'm creating requires fading in on slides. I've set the slides to fade, and when viewed the slides do not in fact fade. I've heard of a workaround that by accessing the dropdown menu under Transition and selecting another fade (which one is not relevant to the trick) that when fade is re-selected the fade behaves as expected. This hasn't been useful in this case. I've also cleared the cache thinking perhaps that would be helpful. This trick was also not a resolution.
    Thanks in advance to anyone with a suggestion to resolve this issue!

  • Cross fades not working in flex mode.

    Hey there,
    i have an audio region in Logic Pro X (latest update) that's using the flex pitch mode. When I want to cross fade it with another region, it just doesn't work. Seems to be a bug or am I wrong?
    Greetings,
    R. Philipp

    Me too. Does the fade tool move your region las if you just had the cursor selected?
    Looks like there are quite a few threads on this topic to check out.

  • Compressor 3 shows no interface and appears to not work

    For some reason Compressor never works for me. Every time I click compressor icon it appears to load up and the toolbar show "compressor" but I see no work interface.
    Or if I try import a FCP project into compressor the samething happens.
    I'm using FCS2.

    What is in the list under the View and Window menus?
    It's possible all of your windows are simply off the edges of your monitor, no way for me to guess form where I'm sitting. Do you know how to use the application feature of Exposé? You can also change the size of your monitor to the largest possible option and see fi the windows become visible.
    Beyond that, no clue. Except many such issues turn out to be simple user errors. You just need to figure out which simple issue you're dealing with.
    bogiesan

  • Fades not working

    Hi there, I'm on 8.0.1. In the middle of a session, the fade function stopped working. it still draws in the fades, but doesn't produce any result. I've tried deleting all fade files, but it doesn't fix it.
    Any ideas?
    Cheers.

    forget it. had melodyne running and it overrides any fades you add later. my bad.

  • Text fade not working when published

    I am doing a text fade the same way I always have (or so it
    seems) and it looks fine when I scrub the play head or play in the
    program but when I test the movie the fade doesn't work. I've done
    and redone this and still the same results. I have the text as a
    graphic symbol, set alpha in one frame to 0 and to 100 in the other
    frame, did the motion tween. I am guessing the problem lies in some
    sort of publish setting but I have compared the settings between
    this project and one that works fine and can't seem to find any
    differences. Ideas?

    Is the text static?
    Dave -
    www.offroadfire.com
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • 4.3 Update - Car Stereo Issue, voice dialing not working with Bluetooth

    I've seen some similar issues reported, but they were for specific cars/stereos, and the symptoms were different, so I'm posting about mine:
    Phone: Samsung Galaxy SIII, Android 4.3.
    Car Stereo: Pioneer AVH-X2500BT
    This is a stereo I bought and installed myself. All of its features worked fine, and I was enjoying making calls using voice dialing via the stereo. Then, I installed the 4.3 update to the Galaxy SIII. Ever since (literally, I made a call that day before installing it, and tried shortly after), I cannot use the voice dialing feature. Any attempt to use voice dialing or voice commands via the car stereo will fail. Here's what happens:
    I do a long press on the car stereo's Home button to initiate voice dialing. On my phone, S-Voice starts up, and a Toast (little message) pops up briefly that says "Check in-car audio". When I talk, the little animation on the microphone button in S-Voice does not happen, meaning it's not hearing anything. The car stereo shortly cancels out of voice dialing mode, as though it timed out, or something.
    I've tried switching to Google voice, but the same thing happens. I've tried all kinds of configuration on both devices. I've unpaired and re-paired. Nothing.
    Also, turn-by turn directions from Google Maps appears to not work. The app thinks it's giving them, and when I turn the car off, the voice suddenly works from the phone, but it just won't come out the stereo.
    All other features work fine, including Pandora, and streaming Bluetooth audio. I can even make phone calls, by accessing the contacts and recent call list from the car stereo. The calls work and come through the stereo fine. Literally voice dialing and Google Maps are all that doesn't work.
    Does anyone know how to fix this?

        There could be any number of factors that may be affecting this, byounie. It may be that the firmware on your car stereo headunit may need to be updated. My direct recommendation to check first would be to access your bluetooth submenu, and next to paired info for the Pioneer AVH-X2500BT, you should see a little cog wheel/settings icon. Please select this, and start unselecting everything available there. Work your way up, and enable and test these different settings one by one, to see if there is a conflict between Google Maps and Voice dialing services. Let us know what happens, byounie.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

Maybe you are looking for