# appearing in the 0GL_ACCOUNT field in the report

HI guyz,
I am using the info object 0GL_ACCOUNT in my reports, but # is appearing pre suffixed.
like "#/2020060".
please guide through your expertise.
cheerz,
raps.

You are getting # / 0gl_account field bcoz the 0gl_account filed has 0CHRT_ACCTS as compounding.
If the 0CHRT_ACCTS values are not there then you will get # infront if not you will get value of 0CHRT_ACCTS/0GL_ACCOUNT.
check if the chart of account values master data is loaded or not?

Similar Messages

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Technical Names appearing in the report output

    Hi Experts,
    I am in support and got a strange case. When one of the users runs the report in web, he sees technical names of the fields instead of their description. On the contrary, when I run the report, everything comes fine. I don't know where the problem could lie. If you can help me, that would be really great.

    Hi Shobhit,
    Please check that if the objects are Translated to the language User is using.
    When you try to run the report, you might be using English as default language and everything is there in English only.And when user tries to run the report, most possibly use's login Language must be different.
    You can crosscheck this by using the users language while logging in to Analyser,
    If this is the case (Translation) even you will see the Technical names.
    For Translation Help :
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5]
    Hope this helps.
    Best Regards,
    Pratap Sone

  • Transport of Query successful, but changes not appeared in the report

    Hi All,
    I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
    For that User asked me to add one characteristic to Free characteristics.
    I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
    query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even  the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
    Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
    Help me here asap..
    Thanks,
    Chaitu.
    Edited by: chaithu218 on Jun 21, 2011 10:37 AM
    Edited by: chaithu218 on Jun 21, 2011 10:40 AM

    Hi Chaithu,
    As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
    2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
    1) In development system too, do you have 2 versions?
    2) In production system, check the UID for both verions of the query
    3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
    2 versions by same technical name can exist if:
    1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
    2) or due to system refresh, copy, etc.
    Hope it helps.
    Thanks,
    Abhishek.

  • 0CO_ITEM_TX field needs to appear in the report

    Hi,
    I have a report which gets data from MULTI PROVIDER in turn from DSO 0CCA_O09     CO-OM-CCA: Actual - Line Items. This DSO has the field 0CO_ITEM_TX - but when I try to drag it in from dso to multi provider screen it disappears in the data fields of dso.
    This Info Object is marked as attribute only and it gets errors when it is activated by unchecking the attribute only..
    Please let me know how to make this field available in multi provider for reporting?
    Thanks in advance
    Anil

    Roberto,
    When I uncheck it and try to activate it it gives me errors:
    EXCEPTION CX_RSRV_SID_CREATION_ERROR occured (Program:CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include:
    CL_RSDRO_GET_SIDS_FOR_ODSO====CM004,
    I do not know if I give  aclear picture, but if you can provide me ur mail ID, I can send you the screen shot of it. Thanks

  • How to pull the date parameter to appear in the report template?

    Hi Gurus, and Experts,
    I need to pull the date parameter I selected in BIP to appear in my report template? How to code this in BIP?
    Identifier are: dto and dfrom
    date fromat string: MM-dd-yyyy
    Regards,
    JP
    Edited by: user10955574 on Nov 10, 2010 2:38 AM
    Edited by: user10955574 on Nov 10, 2010 2:39 AM

    Declare the parameter in the template as
    <?param@begin:param1?>
    and use it as <?$param1?>

  • SY-PAGNO does not appear when the report is run in background

    Dear all,
    I have one customised program that has page number included in each page. When I run it online, it will display the page number. But, when I run it in background, the page number disappear!!
    The command of WRITE: 'PAGE NUMBER:', SY-PAGNO was done under TOP-OF-PAGE.
    Am I doing it correctly? Please advice. Thank you.

    Dear Seshu,
    This is my complete coding under TOP-OF-PAGE.
          write: /130 'VA DYNAMICS SDN BHD',
                 /122 'Stock Ageing Report as at ', s_budat.
          skip 1.
          write: /270 'Page: ', SY-PAGNO.
          skip 1.
          format intensified on color col_heading .
          write: /01(292) sy-uline.
          write: /01  sy-vline, 'Part No.                  ',
                      sy-vline, 'Mat.Grp. ',
                      sy-vline, 'Description                             ',
                      sy-vline, 'GT 2 Years           ',
                      sy-vline, '1 - 2 Years          ',
                      sy-vline, '6 - 12 Months        ',
                      sy-vline, '3 - 6 Months         ',
                      sy-vline, '3 Months             ',
                      sy-vline, '7 Days               ',
                      sy-vline, 'Quantity      ',
                      sy-vline, 'Value           ',
                      sy-vline, 'Avg.Price',
                      sy-vline, 'ValA',
                      sy-vline, 'Loc. ',
                  292 sy-vline.
          write: /01(292) sy-uline.
    Below is my report declaration:
    REPORT ZTEST_STKAGE_VAD NO STANDARD PAGE HEADING LINE-SIZE 295 LINE-COUNT 65  .
    All this while, I used the same way of displaying SY-PAGNO. No problem at all. Now it give me a problem.
    Regards.

  • Key figures are not appearing in the reports ?

    Hi Guys,
    After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

    Hi,
    can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
    Ingo

  • What is the reason for these messages appearing in the report Please help

    Hi Guru's,
    In BI Report Output displays following warning message along with Report Output
    Warning Messages : (
    Characteristic Organizational Unit has no master data for "00000000" or you do not have authorization
    An invalid selection for characteristic Organizational Unit has been discarded )
    Please help me by providing the inputs what might be causing this issue.
    So that I can resolve this.
    Organizational Unit(0EMPLOYEE_0ORGUNIT) is present in selection screen of report.
    Orgaizational unit(0EMPLOYEE_0ORGUNIT) is the attribute of Employee.
    First when I got this warning messages I found that master data for 0employee was loaded but not for loaded for 0orgunit
    So I loaded the data for 0orgunit (attr, text and hierarchy) and Then again loaded for 0Employee
    Then I run attribute change run for 0EMPLOYEE and 0ORGUNIT
    I thought this would resolve the issue
    After doing the above steps also I am still getting same warning message
    Please gurus help
    Thanks,
    Deepika

    Hi Depika,
    Refer the SAP Note 1149556 - Characteristic ... has no master data for "..."
    Hope this helps.
    Regards,
    Hari.

  • Report S_ALR_87012341Duplicate invoices have started to appear on the repor

    There is a Report S_ALR_87012341 for Duplicate invoices verification.
    The Report S_ALR_87012341 is not working correctly. 
    Duplicate invoices have started to appear on the report for the first time.
    These documents are however 2 years old and have now been archived.
    It appears that the documents are only on the report once the archiving of the document has taken place.
    We need to understand why the report is not showing these documents as we use this as one of our controls in AP. 
    Kindly help the approach that is required to resolve this issue.

    Look at the authorizations , use SU53 to find out missing authorizations .
    Else , look up for your basis counterpart - to take a trace of the same to find out the exact bug.
    Cheers ,
    Dewang

  • Not appear the value when i execute the report

    Hi, what reasons could be:
    appear "#" instead a value for example "100", but only forthe records of the last load, the other records of another loads are ok, the report show
    Infoobject value = 200
    KF = 1,
    but for the last record in the query
    Infoobject value = #,
    KF=  1
    in the cube exist this record, it not must be # , is 100, the only thing that i did was change an attr Nav, of this infoobject, just mark the check of lowercase allowed,
    i dont know what can i do to solve this problem that i made i m sure because i execute this report yesterday and it was ok....
    help

    i reactivate the Master data,
    i was checking and this Infoobject has 10 records in the cube and in the KF that i evaluate has record 1 = 1, record 2= -1,  you know, and the others records that appears in the report has just 1, i guess this happend because i run the Delta load twice, i have just to load only one record trought Repair  load and now appear ok in the report, but the problem is i can do this repair for all the records because it works with delta, and the delta works wrong....

  • How to format the report with the aggregated value

    Hi,
    I have 2 characteristics and 3 KFs in the infocube.
    First field is Cost Center
    Second field is creation Date
    3rd field is KF1
    4th field is KF2
    5th field is KF3
    I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
    The date in the info cube is as follows.
    Cost Ceneter  Date( no Display)   KF1     KF2      KF3
    CC1           01/01/2006          100     150      200
    CC1           02/02/2006          75      100      95
    CC1           05/02/2006          125      95      125
    CC2           01/02/2006          75       25      85
    CC2           02/02/2006          85       65      10
    As the Date field is in query set to No display so the date appearing in the report is as follows
    CC1       100        150        200
              75         100        95
              125          95        125
    CC2       75           25        85
              85           65        10
    But I want the aggregated value at cost senter level i.e.
    CC1       300         245       420
    CC2       160         90         95
    I can not remove the Date frield from query as there is a formula variable defined on the date field.
    Please let me know how to bring the report to the required format.
    Bill
    Message was edited by:
            Bill Bryan

    If you are in new Bex, you can do it.
    You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
    Say you have
    CH1--CH2CH3--CKF1
    To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
    Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
    ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
    Message was edited by:
            Ajay Das

  • Error in Accessing the Report Server URL

    Hi All,
              I am trying to access the Report Server URL in PowerPivot.But facing below issue .Can any one help me how can I solve the issue
    Thanks,  
    Sid

    Hi Visakh,
                    Yes,The user is holding the permission as "Global User" in sql.Hope you help me in solve this issue
    Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .
    Hi siddiqali,
    According to the screenshot you posted above, the use account didn't have sufficient permission to open the report, please check the following prerequisites before you perform the action:
    You must use a report definition (.rdl) file as a data source. Importing from a report model is not supported.
    You must have permission to open the report under your Windows user account, and you must know the address of the report or the report server that hosts it. You can check your permissions by trying to open the report in a Web browser first.
    If the report opens, it confirms that you have sufficient permissions and the correct URL.
    Reporting Services must be version SQL Server 2008 R2 or SQL Server 2012. Those versions include the data feed export feature that streams report data in the XML data feed format. You can identify the report server by the Export as Data Feed option
    that appears in the report toolbar when you open the report in browser:
    For detail information, please see:
    Import Data from a Reporting Services Report:
    http://technet.microsoft.com/en-us/library/gg413491.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • Need to send Automatic mails when the report successful or Fail.

    Hello Experts,
    Created one report for reconciliation to check BW and R/3 figures.
    There are exceptions designed using reporting Agent settings on the same report.
    (When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
    There are some mandatory variables for Company code, Period and Currency Type.
    Selections for  Company code and Period are fixed but We have three currency types (00,10,30)
    Reports needs to be executed for three currency types.
    Requirement is that
    when the report is executed for One currency type  (Ex u2013 00)
    If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
    If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
    Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
    Sending mails can be taken care by BASIS people with SMTP configuration.
    I want to know the development needs to be done from BW side.
    Are there are any settings in BW to send the message as Successful  when the report shows green color and message as failed when red color appears in the report.
    Regards,
    Siva.

    Hi,
    As i understand you need to set up an alert framework.
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
    This can also be achieved using BEx broadcaster
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
    Hope this helps.
    -Vikram

  • Why do the "Ok", "No Data" and "N/A" all show as "N/A" in the report?

    Well, I guess the title of this post says it all.
    I'm right now preparing the customer report, but I need to manually change all "N/A" tp their original meaning, which might be "Ok", "No Data" or  "N/A".
    Is this a bug, or what is the train of thought here?
    /Anders

    Short answer is that this is the way it was designed.
    You're seeing "N/A" in the Priority column which, in the design of the health check service, only had meaning for the P1,P2 or P3 grades. That was the basic idea behind the output you're seeing. Another goal in the design of the service was to keep the report focused on the results that were important for the customer to see. And so it was decided that by default, only P1, P2, or P3 grades would be included in the report. We allow overrides, but since the overrides were the exception rather than the rule, there shouldn't be too many "no priority" entries in the report.
    That being said, we're always looking for ways to improve the service, and I can see how it would make sense to display "Ok", "No Data", etc... in the priority column. I will talk to the team to see if it makes sense to change this in a future release.
    In the mean time, I'm afraid you're going to have to continue to change it manually if you would like the non-priority grade names to appear in the report.
    Best,
    Tobin

  • Missing image (html4botransp.gif) from the report

    Hi,
    Our application connects to BO XI R2 server for displaying full client reports using JSP and servlet. Here is the code snippet, we are using to open report in servlet -
    HttpSession session = httpservletrequest.getSession();
              IEnterpriseSession eSession=(IEnterpriseSession)session.getAttribute("EnterpriseSession");
              if (eSession != null)
                   try
                        ReportEngines boReportEngines = (ReportEngines) eSession.getService("ReportEngines");
                        ReportEngine reportEngine = boReportEngines.getService(ReportEngines.ReportEngineType.FC_REPORT_ENGINE);
                        DocumentInstance doc = reportEngine.openDocument(new Integer(httpservletrequest.getParameter("docID")).intValue());
                        Report rep = doc.getReports().getItem(0);
                        HTMLView docHtmlView = (HTMLView)rep.getView(OutputFormatType.HTML);
                        String sHTMLView = docHtmlView.getContent();
                        httpservletresponse.setContentType("text/html;charset=ISO-8859-1");
                        PrintWriter pw = httpservletresponse.getWriter();
                        pw.println(sHTMLView);
                   catch(SDKException ex)
    The report opens successfully, however an 'image not found' error appears on the report opened in HTML page. On checking out the source of opened HTML page, noticed following <IMG> tag at 'image not found' position -
    IMG SRC='getImage.jsp?sEntry=re0000000019f28e6b5990&name=html4botransp.gif' WIDTH='1280' HEIGHT='1810'
    which image is 'html4botransp.gif'? Is it a BO specific image and if yes have we missed adding some library file?
    - A
    Edited by: aditya gaurav on Aug 20, 2008 4:32 PM

    Hi,
    Any1 can suggest what's wrong in below code for image callback -
    In 1st JSP -
    ReportEngines boReportEngines = (ReportEngines) eSession.getService("ReportEngines");
              ReportEngine reportEngine = boReportEngines.getService(ReportEngines.ReportEngineType.FC_REPORT_ENGINE);
              session.setAttribute("ReportEngine", reportEngine);
              System.out.println("docID -
    " + request.getParameter("docId"));
              DocumentInstance doc = reportEngine.openDocument(new Integer(request.getParameter("docId")).intValue());
              Report rep = doc.getReports().getItem(0);
              HTMLView docHtmlView = (HTMLView)rep.getView(OutputFormatType.DHTML);
              ImageOption     webiImgOpt = null;
              webiImgOpt = doc.getImageOption();
              webiImgOpt.setImageCallback("imageCallback.jsp");
              webiImgOpt.setImageNameHolder("image");
              webiImgOpt.setStorageTokenHolder("entry");
              String sHTMLView = docHtmlView.getContent();
    In callback jsp file -
    response.setContentType("image/gif");
    String strEntry = request.getParameter("entry");
    String strImageName = request.getParameter("image");
    ReportEngine cdzReportEngine = (ReportEngine)session.getAttribute("ReportEngine");
    DocumentInstance cdzDocument =  cdzReportEngine.getDocumentFromStorageToken(strEntry);
    Image objImage = cdzDocument.getImage(strImageName);
    byte[] abyBinaryContent = objImage.getBinaryContent();
    ServletOutputStream objServletOutputStream =  response.getOutputStream();
    response.setContentLength(abyBinaryContent.length);
    objServletOutputStream.write(abyBinaryContent);
    objServletOutputStream.flush();
    objServletOutputStream.close();
    I am still unable to display graphs and continue getting error for 'html4botransp.gif'. Both JSP files are present in same sub-directory.
    Thanks

Maybe you are looking for