Append data to internal table

i m calling one FM inside the loop, this FM will return data in internal table. for each loop count i want to save this data to same other internal table, how to do that?
i want to append the one internal tables data to another internal table how to do that?
Thanks

Hi Lucky,
              Refer this code :
LOOP AT I_TAB1.
CALL FUNCTION <FUNCTION NAME>
      EXPORTING
      IMPORTING
      TABLES = I_TAB2.
APEEND LINES OF I_TAB2 to I_TAB3.
REFRESH I_TAB2.
ENDLOOP.
REWARD POINTS IF HELPFUL.
Regards,
Hemant

Similar Messages

Urgent - Append data to internal table from Application server

Hi All,
I encountered the problem while read the input file from Application server...then append it to internal table. I manage to read the input file from presentation and append the data to internal table.
Below are my coding which cause me not able the append data from Application server. Please kindly help me to solving/correct my coding. Thanks in advance .
PARAMETERS : p_inpfl LIKE rlgrap-filename. "Material Input File
SELECTION-SCREEN BEGIN OF LINE.
Application Server
SELECTION-SCREEN COMMENT 1(19) text-002 FOR FIELD rb_ux.
SELECTION-SCREEN POSITION 33.
PARAMETERS: rb_ux RADIOBUTTON GROUP g1.
Presentation Server
SELECTION-SCREEN COMMENT 40(21) text-003 FOR FIELD rb_pc.
SELECTION-SCREEN POSITION 65.
PARAMETERS: rb_pc RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK b01.
FORM f_Input_file.
CLEAR: v_f_exists.
CHECK NOT p_inpfl IS INITIAL. "input file exist
IF NOT rb_pc IS INITIAL. " Pc check
    PERFORM f_read_tab_delimited_file TABLES i_input
                           USING    c_09
                                    p_inpfl
                                    rb_ux
                           CHANGING v_ifile_str_with_tab
                                    v_f_exists
                                    v_ifile_record_count
                                    v_message.
    IF v_f_exists EQ '1' .
UPLOAD FILE could not be read
      MESSAGE e546 .
    ENDIF .
    IF v_ifile_record_count EQ 0 .
Zero records in upload file
      MESSAGE e547 .
    ENDIF.
ELSE.
    OPEN DATASET p_inpfl FOR INPUT IN TEXT MODE.
    DO.
      READ DATASET p_inpfl INTO i_input.
      IF sy-subrc EQ 0.
        APPEND i_input.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    CLOSE DATASET p_inpfl.
ENDIF.

Hi,
Refere the following code for the poulating internal from the application server.
PARAMETERS : pr_sfile TYPE filename-fileintern,
Here give the logical file name from the application serevr.
data :        w_param_1 LIKE filename-fileintern,
               x_file(500),
               w_move_file LIKE epsf-epsfilnam,
               w_from_dir LIKE epsf-epsdirnam,
               w_path LIKE rlgrap-filename,
              input_line(1000),
              w_path LIKE rlgrap-filename,
              w_file LIKE rlgrap-filename,
              w_dir LIKE rlgrap-filename,
              w_dir1 LIKE epsf-epsdirnam,
              w_file1 LIKE epsf-epsfilnam,
**************Start of the code***************
MOVE '*' TO w_param_1.
PERFORM get_file_name USING pr_sfile w_param_1.
    LOOP AT it_file WHERE name CP w_file1.
      CLEAR : x_file, w_path,
              w_move_file, w_from_dir.
      REFRESH : it_input,
                it_input_err.
   IF w_flag IS INITIAL.
      CONCATENATE w_dir it_file-name INTO x_file.
      CONDENSE x_file.
TO Move file from sever for backup storing the file name and path
      w_path = x_file.
      CALL FUNCTION 'TRINT_SPLIT_FILE_AND_PATH'
        EXPORTING
          full_name     = x_file
        IMPORTING
          stripped_name = w_move_file
          file_path     = w_from_dir
        EXCEPTIONS
          x_error       = 1
          OTHERS        = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
********here it_input will be the structure of the file present on the application server
      PERFORM read_file TABLES it_input
                        USING x_file.
      CLEAR it_input_err.
      REFRESH it_input.
    ENDLOOP.
*******************end of the code****************
*&      Form read_file
      text
     -->P_X_FILE text
FORM read_file TABLES it_tab
                USING x_file.
OPEN DATASET x_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    WRITE : / text-006.
ELSE.
    DO.
      READ DATASET x_file INTO input_line.
      IF sy-subrc = 0.
        CLEAR: it_input, count.
        DO.
          ADD 1 TO count.
          ASSIGN COMPONENT count OF STRUCTURE it_tab TO <fs>.
          IF sy-subrc = 0.
            SPLIT input_line AT separator INTO <fs> input_line.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        APPEND it_tab.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
ENDIF.
CLOSE DATASET x_file.
*&      Form get_file_name
      text
     -->P_P_SFILE text
     -->P_W_PARAM_1 text
FORM get_file_name USING    p_sfile
                            w_param_1.
                           CHANGING x_file.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      client           = sy-mandt
      logical_filename = p_sfile
      parameter_1      = w_param_1
    IMPORTING
      file_name        = x_file
    EXCEPTIONS
      file_not_found   = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
w_path = x_file.
CALL FUNCTION 'TRINT_SPLIT_FILE_AND_PATH'
    EXPORTING
      full_name     = w_path
    IMPORTING
      stripped_name = w_file
      file_path     = w_dir
    EXCEPTIONS
      x_error       = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_dir1 = w_dir.
w_file1 = w_file.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
    EXPORTING
      dir_name               = w_dir1
      file_mask              = w_file1
    TABLES
      dir_list               = it_file
    EXCEPTIONS
      invalid_eps_subdir     = 1
      sapgparam_failed       = 2
      build_directory_failed = 3
      no_authorization       = 4
      read_directory_failed = 5
      too_many_read_errors   = 6
      empty_directory_list   = 7
      OTHERS                 = 8.
IF sy-subrc <> 0.
    WRITE : / text-006.
ENDIF.
Hope this will help you.

Xml data into internal table

Hi Friends,
See the followong code which converts xml data into itab.
*& Report ZTEST_XML1                                                  *
REPORT ZTEST_XML1                              .
*PURPOSE: This program transfers XML data into SAP internal table format
*The nodes in DOM can be stored as fields in SAP Internal table
type pool definitions
TYPE-POOLS: ixml. "iXML Library Types
type definitions
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
*t_xml_line
l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string. " String to hold filename
data: begin of i_final occurs 0,
      pnumber(20),
      pname(50),
      pdes(70),
      end of i_final.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'C:\product.xml'.
Validation of XML file: Only DTD included in XML document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
start of selection
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
Wrap the table containing the file into a stream.
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Creating a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val = 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) <> 0.
IF l_parser->num_errors( ) <> 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
text
<--P_L_XML_TABLE_SIZE text
<--P_L_XML_TABLE text
FORM get_xml_table CHANGING p_l_xml_table_size
p_l_xml_table.
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
Upload file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement
= space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. " get_xml_table
*& Form process_dom
text
-->P_L_DOCUMENT text
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE:/.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL.
EXIT.
ENDIF.
Create a node iterator
iterator = node->create_iterator( ).
Get current node
node = iterator->get_next( ).
Loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
Advance to next node
node = iterator->get_next( ).
ENDWHILE.
*delete adjacent duplicates from i_final.
*loop at i_final.
*write:/ i_final-pnumber,i_final-pname,i_final-pdes.
*endloop.
*if not i_final[] is initial.
*modify ztestproduct from table i_final.
*endif.
ENDFORM. " process_dom
in the above code at line no: 268 there is a method:
value = node->get_value( ).in which actual data from XML file is coming.
So the varibale "Value" contains the data.
see line no: 270:
WRITE: AT indent value COLOR COL_GROUP INVERSE.
what ever values i am getting here i want to append to a Internal table ...
Can any body tell me how to do that?
i am sure of reward points.

Hai Ravi
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:\xx.xml'
TABLES
data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[].
Regards
Sreeni

Error in uploading excel sheet data into internal table

Dear all,
i am facing problem when uploading data from excel. i used KD_GET_FILENAME_ON_F4.i select the file and pass on to ALSM_EXCEL_INTO_INTERNAL_TABLE.and i get the ERROR....
Illegal type when transferring an internal table to a FORM. this is my code .
types : begin of ty_mm01,
        matnr like rmmg1-matnr,
        mbrsh like rmmg1-mbrsh,
        mtart like rmmg1-mtart,
        maktx like makt-maktx,
        meins like mara-meins,
        matkl like mara-matkl,
        bismt like mara-bismt,
        spart like mara-spart,
        mtpos like mara-mtpos_mara,
        end of ty_mm01.
data : tt_mm01 type standard table of ty_mm01,
        wa_mm01 like TT_MM01.
data : t_bdcdata like standard table of bdcdata,
       t_bdcmsgcoll like standard table of bdcmsgcoll.
constants: begcol TYPE i value 1 ,
            begrow TYPE i value 1,
            endcol TYPE i value 100,
            endrow TYPE i value 32000.
selection-screen : begin of block bdc with frame.
parameter : tfile like rlgrap-filename obligatory.
selection-screen : end of block bdc.
at selection-screen on value-request for tfile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
   PROGRAM_NAME        = 'ZMM_MAT_MAS_BASIC_DATA'
   DYNPRO_NUMBER       = '1000'
   FIELD_NAME          = 'TFILE'
   STATIC              = 'X'
MASK                = ',*.xls,'
CHANGING
    FILE_NAME           = tfile
start-of-selection.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = tfile
    I_BEGIN_COL                   = begcol
    I_BEGIN_ROW                   = begrow
    I_END_COL                     = endcol
    I_END_ROW                     = endrow
TABLES
    INTERN                        = tt_mm01
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance

Hi,
Check these FM : KCD_EXCEL_OLE_TO_INT_CONVERT
Report ZPSP_TEST.
data: bdc_DATA like bdcdata occurs 0 with header line,
mess_tab like bdcmsgcoll occurs 0 with header line.
DATA: BEGIN OF ITAB OCCURS 0 ,
tcnt TYPE i, "Table Counter &H0D
WERKS LIKE T001W-WERKS,
BNFPO LIKE EBAN-BNFPO,
MATNR LIKE MARA-MATNR,
MENGE LIKE EBAN-MENGE,
END OF ITAB.
start-of-selection.
PERFORM upload_data.
loop at itab.
perform bdc_dynpro using 'SAPMM06B' '0100'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-BSART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-BSART'
'NB'.
perform bdc_field using 'RM06B-LPEIN'
'T'.
perform bdc_field using 'EBAN-WERKS'
ITAB-WERKS.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RM06B-EKGRP'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RM06B-BNFPO'
ITAB-BNFPO.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-MATNR(01)'
ITAB-MATNR.
perform bdc_field using 'EBAN-MENGE(01)'
ITAB-MENGE.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'RM06B-EEIND'
record-EEIND_010.
*perform bdc_field using 'RM06B-LPEIN'
record-LPEIN_011.
*perform bdc_field using 'EBAN-EKGRP'
record-EKGRP_012.
*perform bdc_field using 'EBAN-BADAT'
record-BADAT_013.
*perform bdc_field using 'EBAN-FRGDT'
record-FRGDT_014.
*perform bdc_field using 'EBAN-PREIS'
record-PREIS_015.
*perform bdc_field using 'EBAN-WAERS'
record-WAERS_016.
*perform bdc_field using 'EBAN-PEINH'
record-PEINH_017.
*perform bdc_field using 'EBAN-REPOS'
record-REPOS_018.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE(02)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'RM06B-BNFPO'
record-BNFPO_019.
*perform bdc_field using 'EBAN-MATNR(02)'
record-MATNR_02_020.
*perform bdc_field using 'EBAN-MENGE(02)'
record-MENGE_02_021.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'EBAN-MENGE'
ITAB-MENGE_023.
*perform bdc_field using 'RM06B-EEIND'
record-EEIND_024.
*perform bdc_field using 'RM06B-LPEIN'
record-LPEIN_025.
*perform bdc_field using 'EBAN-EKGRP'
record-EKGRP_026.
*perform bdc_field using 'EBAN-BADAT'
record-BADAT_027.
*perform bdc_field using 'EBAN-FRGDT'
record-FRGDT_028.
*perform bdc_field using 'EBAN-PREIS'
record-PREIS_029.
*perform bdc_field using 'EBAN-WAERS'
record-WAERS_030.
*perform bdc_field using 'EBAN-PEINH'
record-PEINH_031.
*perform bdc_field using 'EBAN-REPOS'
record-REPOS_032.
perform bdc_field using 'EBAN-TXZ01'
'BEARING 2"X2"'.
perform bdc_field using 'EBAN-MENGE'
'65'.
perform bdc_field using 'RM06B-EEIND'
'2005/01/03'.
perform bdc_field using 'RM06B-LPEIN'
'D'.
perform bdc_field using 'EBAN-EKGRP'
'M11'.
perform bdc_field using 'EBAN-BADAT'
'2005/01/03'.
perform bdc_field using 'EBAN-FRGDT'
'2005/01/03'.
perform bdc_field using 'EBAN-PREIS'
' 1,120.00'.
perform bdc_field using 'EBAN-WAERS'
'EUR'.
perform bdc_field using 'EBAN-PEINH'
'1'.
perform bdc_field using 'EBAN-REPOS'
'X'.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-TXZ01'
'DRILLING PIPE 10"'.
perform bdc_field using 'EBAN-MENGE'
'75'.
perform bdc_field using 'RM06B-EEIND'
'2005/01/03'.
perform bdc_field using 'RM06B-LPEIN'
'D'.
perform bdc_field using 'EBAN-EKGRP'
'M11'.
perform bdc_field using 'EBAN-BADAT'
'2005/01/03'.
perform bdc_field using 'EBAN-FRGDT'
'2005/01/03'.
perform bdc_field using 'EBAN-PREIS'
' 0.53'.
perform bdc_field using 'EBAN-WAERS'
'EUR'.
perform bdc_field using 'EBAN-PEINH'
'1'.
perform bdc_field using 'EBAN-REPOS'
'X'.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RM06B-BNFPO'
perform bdc_field using 'BDC_OKCODE'
'&H3DBU'.
*perform bdc_field using 'RM06B-BNFPO'
CALL TRANSACTION 'ME51' USING BDC_DATA MODE 'A'.
endLOOP.
FORM upload_data.
*local variable declaration
DATA : lv_index TYPE i,
l_count TYPE i.
*local constants declaration
CONSTANTS:
lc_start_col TYPE i VALUE '1' ,
lc_start_row TYPE i VALUE '2' ,
lc_end_col TYPE i VALUE '256' ,
lc_end_row TYPE i VALUE '65536'.
*local field symbol declaration
FIELD-SYMBOLS : <lf_s>.
*loacal internal table declaration
DATA : li_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
*refresh internal table for each loop
CLEAR: li_intern,
l_count .
REFRESH li_intern.
to upload the data in excel on the presentation server this function
module converts the data from excel file into an internal table
containing row no col no and value
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename &H3D 'Give file location here'
i_begin_col &H3D lc_start_col
i_begin_row &H3D lc_start_row
i_end_col &H3D lc_end_col
i_end_row &H3D lc_end_row
TABLES
intern &H3D li_intern
EXCEPTIONS
inconsistent_parameters &H3D 1
upload_ole &H3D 2.
checking for data in internal table
CHECK NOT li_intern[] IS INITIAL.
sorting internal table
SORT li_intern BY row col.
collecting data into an internal table
LOOP AT li_intern.
MOVE: li_intern-col TO lv_index.
lv_index &H3D lv_index + 1.
ASSIGN COMPONENT lv_index OF STRUCTURE itab TO <lf_s>.
MOVE : li_intern-value TO <lf_s>.
AT END OF row.
l_count &H3D l_count + 1.
itab &H3D l_count.
APPEND itab.
ENDAT. " at end of row
ENDLOOP. " loop at li_intern
Reg,
Siva
Edited by: Siva Prasad on Jun 1, 2009 8:41 AM
Edited by: Siva Prasad on Jun 1, 2009 4:25 PM

Download data from internal table to flat file.

I need to download the data from Internal table to Flat file. can any one suggest how to do it? i suppose WS_Download OR GUI_DOWNLOAD.
but if it is please guide me how to use this.
is thre any other F.M. please provide the information.
Thanks in advance

Hi,
Try this,
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
   row(500) type c,
   end of it_excelfile.
DATA: rc TYPE sy-ucomm,
        ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
       EXPORTING
            query    = 'FE' "File Exist?
            filename = p_file
       IMPORTING
            return   = rc.
IF rc NE 0.                       "If File alread exists
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
*          TITLEBAR              = ' '
*          DIAGNOSE_OBJECT       = ' '
           text_question         = 'File Already exists!!'
           text_button_1         = 'Replace'
*          ICON_BUTTON_1         = ' '
           text_button_2         = 'New name'
*          ICON_BUTTON_2         = ' '
*          DEFAULT_BUTTON        = '1'
*          DISPLAY_CANCEL_BUTTON = 'X'
*          USERDEFINED_F1_HELP   = ' '
*          START_COLUMN          = 25
*          START_ROW             = 6
*          POPUP_TYPE            =
      IMPORTING
           answer                = ld_answer
*     TABLES
*         PARAMETER              =
      EXCEPTIONS
          text_not_found         = 1
          OTHERS                 = 2.
* Option 1: Overwrite
    IF ld_answer EQ '1'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
*            BIN_FILESIZE            =
             filename                = p_file        "File Name
             filetype                = 'ASC'
*       IMPORTING
*            FILELENGTH              =
        TABLES
            data_tab                = it_excelfile   "Data table
        EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      IF sy-subrc <> 0.
        MESSAGE i003(zp) WITH
                 'There was an error during Excel file creation'(200).
        exit. "Causes short dump if removed and excel document was open
      ENDIF.
* Option 2: New name.
    ELSEIF ld_answer EQ '2'.
      CALL FUNCTION 'DOWNLOAD'
        EXPORTING
             filename            = p_file          "File name
             filetype            = 'ASC'           "File type
*             col_select          = 'X'            "COL_SELECT
*             col_selectmask      = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
*                                                   "COL_SELECTMASK
             filetype_no_show    = 'X'     "Show file type selection?
*       IMPORTING
*             act_filename        = filename_dat
        TABLES
             data_tab            = it_excelfile    "Data table
*            fieldnames          =
        EXCEPTIONS
             file_open_error     = 01
             file_write_error    = 02
             invalid_filesize    = 03
             invalid_table_width = 04
             invalid_type        = 05
             no_batch            = 06
             unknown_error       = 07.
    ENDIF.
ELSE.                               "File does not alread exist.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
*          BIN_FILESIZE            =
           filename                = p_file         "File name
           filetype                = 'ASC'          "File type
*     IMPORTING
*          FILELENGTH              =
      TABLES
           data_tab                = it_excelfile   "Data table
      EXCEPTIONS
           file_write_error        = 1
           no_batch                = 2
           gui_refuse_filetransfer = 3
           invalid_type            = 4
           OTHERS                  = 5.
    IF sy-subrc <> 0.
      MESSAGE i003(zp) WITH
               'There was an error during Excel file creation'(200).
      exit. "Causes short dump if removed and excel document was open
    ENDIF.
ENDIF.
Regards,
Raghav

Reading Data from Internal Table

Hi,
Can anyone please tell me how to read data from Internal Tables in the Event Handler without using the Select statement OnInitialization?
Thanks,
Gaurav

Hi Siddhartha,
Can you tell me the problem in my code. I tried to work on the way you suggested. Though I have not finished with the coding, I just wanted to know whether I am going in the direction or not.
I have declared the the structure in Type Defination as
TYPES: BEGIN OF TEST_STRUC,
         BEGDA TYPE BEGDA,
         ENDDA TYPE ENDDA,
       END OF TEST_STRUC.
TYPES: TEST_TAB_TYPE TYPE TABLE OF TEST_STRUC.
In the Event Handler, I have added the following code on OnInputProcessing:
event handler for checking and processing user input and
for defining navigation
DATA TEST_INFO LIKE LINE OF TEST_TAB.
DATA: MYTAB6 TYPE TABLE OF PA0006,
      MYTAB6_WA LIKE LINE OF MYTAB6.
REFRESH TEST_TAB.
CLEAR TEST_INFO.
MYTAB6_WA-BEGDA = REQUEST->GET_FORM_FIELD( STARTDATE ).
MYTAB6_WA-ENDDA = REQUEST->GET_FORM_FIELD( ENDDATE ).
IF EVENT->NAME EQ 'button'
   AND EVENT->SERVER_EVENT EQ 'click'.
LOOP AT MYTAB6 INTO MYTAB6_WA.
    TEST_INFO-BEGDA = MYTAB6_WA-BEGDA.
    TEST_INFO-ENDDA = MYTAB6_WA-ENDDA.
ENDLOOP.
APPEND TEST_INFO TO TEST_TAB.
CLEAR TEST_INFO.
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'begda' ).
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'endda' ).
NAVIGATION->GOTO_PAGE( 'MyBSP2.htm').
ENDIF.
P.S. MyBSP2.htm is my next page.
Thanks,
Gaurav

Move Field symbol data to Internal table

Dear All,
                 Please suggest how to move field symbol data to internal table. The requirement is I have dynamic data in Field symbol which to move to table parameter of a function module.
Thanks in Advance
Rams.

Dear All,
                In need to pass tabular data i.e. multiple entries from field symbol to the table parameter of the custom function module.
Field symbol is declared as below:
FIELD-SYMBOLS: <FS_EXCEL_TAB> TYPE STANDARD TABLE,
                             <FS_TABLE_HEADER> .
DATA WA_PD LIKE PRICE_DOWNLOAD.
APPEND <FS_TABLE_HEADER> TO <FS_EXCEL_TAB>.
CLEAR <FS_TABLE_HEADER>.
WA_PD-VKORG = <FS_EXCEL_TAB>-VKORG.u201D Problem while using this statement
APPEND WA_PD TO PRICE_DOWNLOAD.
   CLEAR WA_PD.
Field symbol <FS_EXCEL_TAB> is populated like this.
VKORG | KUNNR_SH | KUNNR_SP |
0015      | 102105       | 102105       |
Now I need to move this data to table in tables parameter of custom fucntion module.
Thanks in advance,
Rams

How to get editable data into internal table

Hi ABAPers,
I am displaying REUSE_ALV_GRID_DISPLAY report with one editable field and i have post button in report. Once i select post button i need to get editable data to internal table which i passed to REUSE_ALV_GRID_DISPLAY.
actually i am writing below code but data is not coming to internal table.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                          = sy-repid
     i_callback_pf_status_set                  = 'PF-STATUS'
     i_callback_user_command               = 'USER_COMMAND '
     it_fieldcat                                        = t_field[]
     i_default                                          = 'X'
    TABLES
      t_outtab                          =   <fs_display1>.       "t_display
FORM user_command USING g_ucomm LIKE sy-ucomm
               rs_selfield TYPE slis_selfield.
g_test1 = g_ucomm.
CASE g_ucomm.
    WHEN 'POST'.
      READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1.    "Just for testing index 1
      IF sy-subrc = 0.
        w_display = <fsw_display1>.
        APPEND w_display TO t_display.
        CLEAR : w_display.
      ENDIF.
      PERFORM v1.
      PERFORM bapi_call.
ENDCASE.
ENDFORM.                    "USER_COMMAND
Please help me how to get.
Regards,
Raju.

Hi,
Try the following:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF-STATUS'
i_callback_user_command = 'USER_COMMAND '
it_fieldcat = t_field[]
i_default = 'X'
TABLES
t_outtab = <fs_display1>. "t_display
FORM user_command USING g_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
g_test1 = g_ucomm.
CASE g_ucomm.
WHEN 'POST'.
* to reflect the data changed into internal table
      DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1. "Just for testing index 1
IF sy-subrc = 0.
w_display = <fsw_display1>.
APPEND w_display TO t_display.
CLEAR : w_display.
ENDIF.
PERFORM v1.
PERFORM bapi_call.
ENDCASE.
ENDFORM. "USER_COMMAND
Hope it helps.
Regards,
Gilberto Li

Char data into internal table.

Hi all,
I will get data from the FTP (.TXT file) through FTP_SERVER_TO_R3.
in chardata with separater Tab delimited.
here i took one field symbol and assigning the data into internal table.
till here every thing is ok.
My problem is one data type is 13 char, if that field is more than 13 char in the file
it is giving DUMP. (DUMP is OVERFLOW Field 999976767878.22)
TYPES : BEGIN OF X_STRING,
                   LINE(150) TYPE STRING,
              END OF X_STRING.
data : IT_STRING TYPE STANDARD TABLE OF X_STRING,
          WA_STRING TYPE X_STRING.
                      FIELD-SYMBOLS : <fs> TYPE ANY.
                    LOOP AT chardata INTO wa_chardata.
                      REFRESH it_string.
                      SPLIT wa_chardataline AT cl_abap_char_utilities=>horizontal_tab INTO TABLE it_string.
                      LOOP AT it_string INTO wa_string FROM 1 TO 29.
                        ASSIGN COMPONENT sy-tabix OF STRUCTURE wa_data TO <fs>.
                        <fs> = wa_string-field1.
                        UNASSIGN <fs>.
                      ENDLOOP.
                      APPEND wa_data TO it_data.
                      CLEAR wa_data.
                    ENDLOOP.
Please give me solution to over come this.
Regards,
Sri

In Statement ASSIGN COMPONENT sy-tabix OF STRUCTURE wa_data TO <fs>.
insted of using SY-TABIX use the actual field name of the structre wa_data .
Use a RTTS Method to get all the fields of the structre WA_DATA and then loop at all the fields and then manuplate teh that which has been splitted...!
Hope it helps it will not cause any over flow..and ...( Try to condence the The splitted dat use condence addition while moveing the data to wa_data it will avoide the leading and trailing spaces.... )
Edited by: Anup Deshmukh on Jun 17, 2010 8:31 AM

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

Appending data from one table to another

Hello
How to append data from one table t1 to another table t2.
t1 and t2 have the same structures .
t2 contains already data so i don't want do delete it and create it as select * from t1.
If there is a mean to add t1 content without altering t2 content.
Thanks in advance

insert into t2
select * from t1

Gui_download for transferring the data from internal table to excel sheet.

hi all,
i am using gui_download for transferring the data from internal table to excel sheet.
I have a internal table with 3 columns col1,col2,col3 and I am getting the file at the specified path,but my problem is that,in the excel sheet(path specified) all the 3 columns values are printed in one column.Please help me.
Thanks in advance.

Hi Venkata,
plz use FM 'SAP_CONVERT_TO_XLS_FORMAT' :
call function 'SAP_CONVERT_TO_XLS_FORMAT'
    exporting
*   I_FIELD_SEPERATOR          =
*   I_LINE_HEADER              =
      i_filename                 = p_file
*   I_APPL_KEEP                = ' '
    tables
      i_tab_sap_data             = t_mbew
* CHANGING
*   I_TAB_CONVERTED_DATA       =
* EXCEPTIONS
*   CONVERSION_FAILED          = 1
*   OTHERS                     = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hope this helps,
Erwan

Downloading data from internal table to xls file leading zeros are not disp

Hai abap gurus,
when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
Ex:
<b>ECC Code.</b>
045234
88567
098456
but output is giving like this:
45234
88567
98456
how to get the actual values.....
plz help me in this matter.

Dear Kiran,
Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
Then use the function module to download the content of the internal table to the excel file.
Regards,
Abir
Don't forget to Reward Points *

Upload excel data into Internal table

Hi,
I'm trying to upload excel data into internal table, well the excel file layout will be different on each run of the report.
Excel file will have 60 columns and 500 record limit. I can upload the excel data using 'ALSM_EXCEL_TO_INTERNAL_TABLE' and 'KCD_EXCEL_OLE_TO_INT_CONVERT' but the output table is generates 60 lines for each record i.e.., 60 * 500 = 30,000 which could cause performance.
I try with the FM 'TEXT_CONVERT_XLS_TO_SAP', but this will only work if the file structure is static. It didn't work for dynamic file layout. Even GUI_UPLOAD doesn't work to upload excel file, it will work if I convert the file to Tab delimited file.
Please advise if you know any alternate procedure to upload excel data into internal table.
Thanks,
Kumar.

Moderator message - Cross post locked
Rob

Problem in collecting Spool data into internal table

Hi ,
i need to download spool request data into internal table,
after collecting i need to loop it and delete some records,
for this i am using Fm RSPO_RETURN_ABAP_SPOOLJOB
but getting some extra spaces and lines,unable to get right format.
please help me in this issue to prepare internal table like normal internal table with spool id.
Regards
sarath

Hi ,
Thanks for the reply,
My requirement is like i need to collect all the records from the spool to Internal table and
after that based on one field in the internal table i have to separate error records by deleting sucess records from that internal table(from spool),
for that i have to loop the internal table and need to count the error records, after that download to excel and mail functionalities
required for that .
so please help me in this.
Regards
sarath

Append data to internal table

Similar Messages

Maybe you are looking for