Append file problem

its an IDOC to file scenario....
there is a feild called document in receiver feild(In mapping).it can get two values xyz and ABC.
If document = XYZ then XI create file with u201Cxyz.txtu201D name and places in the path
XYZ
ELSE XI creates file with u201CABC.txtu201D name and places in path
ABC
now they say,
R/3 will collect the idocs and sends to XI once, XI should able to crate single file out of these IDOCu2019s
if so i can go with this.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b
but i asked the business people to give us an IDOC immediately rather than collecting it at sender side.
my problem here is,
if we go with append file at the target ,will that properly append as there are two paths
If document = XYZ then XI create file with u201Cxyz.txtu201D name and places in the path
XYZ
ELSE XI creates file with u201CABC.txtu201D name and places in path
ABC

Yes I believe it would... Ihaven't tested so I don't know for a fact but...
In theory it should append to which ever the relevant file is... abc or xyz.
they would be my thoughts...
Obviously you would use variable substiution to make all of this happen but I dont see why it wouldn't work.
Have you tested?

Similar Messages

[log4j] problem with appender file

Hi
i create a new fonctionnality in my web application that needs to write in a specific file some informations. So i create a new appender ..and all it's OK
but now i imagiine that someone change the right off my new appender file : for example suppose that the rights are readonly . I supposed that log4j me an IOException but nothing
my question is informe that the new appender file is readonly
PS : my jdk version is 1.3
Best regards

Hi, hari,
I met the same problem as yours. Did you solve it?
Thanks.

DW CS5 Missing Related Files Problem

Hello
Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
*Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
Any help would be gratefully appreciated, this is a great feature when it works
Cheers
MB

UPDATE:
Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
Hope that helps anyone else that encounters the same issue!
MB

With conversion to Leopard, file problems with networked Windows computer

Last night I did an Archive & Install from Tiger to Leopard on my Intel MacBook Pro. Today, I had trouble finding the other computers at my office. Once I finally got them to show up, I opened a Word file found on another computer, made some changes, and when I tried to save it, I got this message: "This is not a valid file name. Try one or more of the following: *Check the path to make sure it was typed correctly. *Select a file from the list of files and folders." Since this file already existed and I wasn't changing the name, I thought this was odd, but I changed the name from "Seating Chart 3-8-08" to "SeatingChart3-8-08" in case Leopard didn't like spaces when talking to Windows, but I got the same error message. Finally I gave up, not knowing what to do, then discovered that it had in fact saved my file. Still, every time I try to save ANY Word document from the shared folder of the Windows computer, I get the same error message endlessly until I choose "Don't Save."
When I try to open an Excel file from that computer, it won't even open; it says " 'File Name.xls' cannot be accessed. This file may be Read-Only, or you may be trying to access a Read-Only location. Or, the server the document is stored on may not be responding." As with the Word file problem above, I did not have any problem accessing the files until I converted to Leopard.
The Windows machine is Windows XP using Microsoft Office 2003; I have Microsoft Office 2004 on my machine.

See if this Link, by Pondini, offers any insight to your issue...
Transfer from Old to New
http://pondini.org/OSX/Setup.html
Also, See here if you haven't already...
http://www.apple.com/support/switch101/ Switching from PC

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

[ZIP Archive] Append files to an existing archive

Hi to all,
I have an existing file that contains a ZIP archive. I want to add some files to this archive. I have seen in another thread that it's mandatory to read all the structures and construct a new zip file in order to add other files?
Is it true?
In this thread, someone proposes a method that performs this job
<quote>
 * Loads a zip file for appending files
 * @param file The old zip archive
 * @param newFile The new zip archive
 * NOTE: This method will write a new file and data to an archive, to
 * write an existing file, we must first read the data frm the file,
 * then you could call this method.
 public ZipOutputStream loadZipFile(File file, File newFile)
 ZipOutputStream zipOutput = null;
 ZipFile zipFile = null;
 Enumeration zippedFiles = null;
 ZipEntry currEntry = null;
 ZipEntry entry = null;
 try {
 zipFile = new ZipFile( file.getAbsolutePath() );
 //get an enumeration of all existing entries
 zippedFiles = zipFile.entries();
 //create your output zip file
 zipOutput = new ZipOutputStream(new FileOutputStream (newFile));
 //Get all the data out of the previously zipped files and write it to a new ZipEntry to go into a new file archive
 while (zippedFiles.hasMoreElements())
 //Retrieve entry of existing files
 currEntry = (ZipEntry)zippedFiles.nextElement();
 //Read data from existing file
 BufferedReader reader = new BufferedReader( new InputStreamReader( zipFile.getInputStream( currEntry ) ) );
 String currentLine = null;
 StringBuffer buffer = new StringBuffer();
 while( (currentLine = reader.readLine() ) != null )
 buffer.append( currentLine);
 //Commit the data
 zipOutput.putNextEntry(new ZipEntry(currEntry.getName()) ) ;
 zipOutput.write (buffer.toString().getBytes() );
 zipOutput.flush();
 zipOutput.closeEntry();
 //Close the old zip file
 zipFile.close();
 return zipOutput;
 catch (Exception e)
 Logger.error("LoadZipFile", e);
 System.out.println("Fatal error: "+e);
 return null;
}</quote>
It runs fine but all the file contained in the archive are on a singlie line.
E.g. I have a text file in the original archive. When adding another stuff in the archive and by using this method, my orignal text file has its content on only one line.
Could someone help with this bug?
Kind regards,
St�phane

yes it is true. You can only create a new archive with the added file(s) inside, there is nothing to happen an existing file to an existing zip file.
Good luck

Anyone know if the long standing duplicate files problem with File History has been fixed yet?

There are loads of public threads about the duplicate files problem
with Windows 8/8.1 File History backup system.
From all the threads I've looked at, there seems to be no solution,
and no acknowledgement from MS that they can even repro the problem
(which surprises me considerably as there are so many people who
notice the problem).
Is anyone aware of whether MS (may) have fixed this for Win10?
Are MS aware of the problem and if they're able to fix it?
Dave - with many GB of duplicated files in File History :)

Hmm, is that the attitude MS would recommend? :)
Why would I care what Microsoft would recommend?
Clearly you don't, and you appear to have missed my smiley. Calm down
Noel, many of us are as annoyed by aspects of modern Windows as you
are. :)
I'm all about making Windows actually WORK/./
Aren't we all? Windows is software I use too many hours every day, I
along with many millions of others need it to work really well. You
are not alone.
When they implement something that doesn't work, and even if it did work doesn't do what's needed - and/beyond that/ they remove features people DO need (such as the GUI for Windows Backup), I see no wrong in advising people of the way things
really are.
File History essentially does work - it's saved me a couple of times
in the past couple of weeks. It just has a highly annoying habit of
creating 100% duplicates of some files for no apparent reason. If MS
have fixed that I won't have any known complaints about it.
If you don't like it, you don't have to use it. I generally like it, I
just want to see that its fixed.
Dave

Idoc to file problem.......... IDOC lost

i have a idoc to file problem,
the idoc is sent from R/3 to XI,
the problem is IDOC is sent from R/3,
it didnt reach to XI.....
i have checked.......we05 in R/3, it gives a status 3,
then i checked SM58 in R/3, it shows nothing,
when i check in idx5 in XI, theres no trace of that idoc....and no trace of the scenario run in SXMB_MONI
pls help, where can i trace the idoc.....
pls help

Hi sudeer,
Did You Check It In WE19.(Test Tool For Idoc Processing)
If Not Do The Following Steps:
Step1:
>> Give Your Existing Idoc Number.
Step 2:
>> Basic Type is Your Message type.
 Ex: MATMAS05 or CREMAS05.
Step 3:
>> In Your Existing MATMAS05 or CREMAS05 Structure say EDIDC,
>> You Should Fill Your Mapped Entries In Data Structure of EDIDC.
>> So that Those Fields Gets Framed as Segments.
Step 4:
>> After Doing It goto Menu Bar and Click Idoc And Goto Edit Control Record.
Step 5:
>> Now You Give Your Sender And Receiver Port Number Along With Your
 Logical System And Message Type again its Your MATMAS05 or
 CREMAS05 .
Step 6:
>> After Doing It Click Standard Outbound Processing.
Step 7:
>> It Will Say what Happened To your Idoc.
Step 8:
>> It Is For Sure That if This Processing Fails It Wont Go To XI..
Regards,
Dhayanandh .S
Dont forget To Provide Points If Found Helpful...
Message was edited by:
 DHAYANANDH SIVASANKARAN

Append file name using FileSelectPopup under Windows 7

Hi,
I saw the following thread for the same issue in Vista, just wanted to make sure that this issue has been fixed for Windows 7 also before I upgrade to the latest version.
http://forums.ni.com/t5/LabWindows-CVI/Append-file-name-using-FileSelectPopup-under-Windows-VISTA/m-...
Thanks,
Karthik
Solved!
Go to Solution.

Hi,
I ran across that issue when I was running applications built under CVI 7.1.1 on Windows 7. I can verify that rebuilding the application under CVI 2009 SP1 and later CVI 2010 fixed the issue. So you should be ok.

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

RMI class file problem

I have already write a RMI example for self-study successfully, but there are a little class file problem that I'm not able fix it.
In my RMI example there are 3 .java files (RMIServer.java, RMIClient.java and a MethodImpl.java)
After I have javac and rmic them, I got RMIServer_Skel.class, RMIServer_Stub.class, RMIClient.class and the MethodImpl.class
In order to run the RMI in a local envirnment, I divide them into 2 folders as listed below:
Server - RMIServer_Skel.class, RMIServer_Stub.class and the MethodImpl.class
Client - RMIServer_Stub.class, RMIClient.class and the MethodImpl.class
Then when I start to run them in a DOC envirnment...
start rmiregistry........(run successful and another rmiregistry DOC window created)
java RMIServer.........Exception in thread "main" java.lang.NoClassDefFoundError: RMIServer
Oops? Class not found? How can that be? And after that, I tried something.......to add the RMIServer.class into the Server folder.
Again, I start to run them in a DOC envirnment...
start rmiregistry........(run successful and another rmiregistry DOC window created)
java RMIServer.........The server is instantiated(run successful and print out a String)
Um...is the RMI have to run with a RMIServer.class file? But the RMI notes I refered from is not seems to be telling me to do this, are there any one can give me a helping hand?

please, go here, read thoroughly
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html

Locked file problem with WebDAV

I am using DreamWeaver CS3 on my Macintosh at home and on a
PC at work. I am connecting to my website via WebDAV, and for some
reason Dreamweaver cannot edit the files on the site. When I try to
check out any file I get an error stating: "file.html is locked and
can be viewed but not edited" I then have the option to check it
out or view or cancel. Regardless of what I do, if I continue and
open the file and make changes the file will not get updated on the
remote server even though Dreamweaver reports a successful "put" or
"check in" command in the log file. This happens on both the
Macintosh and the Windows PC. Both are also updated to the latest
versions of Dreamweaver.
The strange thing is, if I mount the WebDAV server as a
filesystem on my macintosh and authenticate with the same
login/password that entered in Dreamweaver's WebDAV settings, I can
edit the html files using a text editor and they save perfectly
fine. Additionally, while the web server is mounted on the desktop,
if I change Dreamweaver's site settings to "local/network" and
enter the locally mounted WebDAV share path instead of using
Dreamweaver's built-in WebDAV client, then everything works
properly in Dreamweaver. Reverting back to using WebDAV in
dreamweaver (as opposed to through the OS) brings about the same
"locked file" problem as before.
There appears to be a problem with Dreamweaver's WebDAV
access to the site, and I'm wondering if there's an easy fix or if
this has been experienced by others?
Thanks,
-Topher

Have a look at FileUtils::DecomposeUnicode and NormalizeUnComposedUnicodeChars. Use the first to convert before using i.e. FileUtils::PMStringToSysFile() and the later afetr i.e. FileUtils::IDFileToPMString().
HTH

Bat file problems with 5.2(3)

I'm having bat file problems with CCM 4.2(3) with bat version 5.2(3). When adding phone/users getting an error number -2146828279 with this message "Description -Subscript Out of range".

Hi Denis,
Just wanted to know if the description contained a comma? There was a bug in a previous BAT version that would affect phone/user inserts if there was a comma.
CSCsb61425 Bug Details
Headline BAT insert fails if phone description contains comma
This was in BAT 5.1.4
Hope this helps!
Rob

Append file extension

I want to shut off the automatic append file extension when saving a file in Illustrator CS3 to not have the .ai appear at the end of the file name. How do I do this?

In a manufacturing company where naming conventions are in place, we don't want .ai placed into the file name on certain files. I am running a Mac and never had to have an extension in the filenames before cause Macs always hid the extension? I have the Finder preference to not show extensions but since Illustrator is placing it as part of the filename in the save dialog, it shows no matter what. What does adobe expect us to do, click on the file in the Finder and get infor, then click hide extension? We are making the conversion from Freehand to Illustrator (not by choice) and this is turning into a big nightmare on a lot of issues.
Give me a lecture on the mapping issue. If I remove the .ai in the save dialog box before saving, I haven't seen any issues yet. My applescript studio applications don't save the .ai when they drive Illustrator. No issue there either. Tell me what you know about mapping issues.
Don't want the app to automatically append file extension. Can it be done.... Yes or No?

Appending tdms files problem

Hello all,
I've developed a VI that logs data from a 6 hours test. Sampling rate is 10k resulting to 3,600 TDMS files each of them saving 6 columns (AI channels) of 60,000 rows. These are raw data that are going to be post processed calculating i.e rms values, FFTs and so on.
I am in a stage where I should take a decision of whether I should use DIAdem for post processing or develop my own LabView code. By far I would prefer DIAdem as I am not very experienced Labview programmer. My questions are:
1) Drag&dropping 3,600 tdms files to the Data Portal results as expected memory overflow. Is there anyway of appending all these massive data for processing? I.e being able to have a chart of 6 hours and the corresponding rms values?
2) Is there any way of (if it is required) compressing my samples? I.e get an average of rms values every 10 or 50 cycles?
I have been through most of the webcasts on DIAdem and I really wanna take a swift decision of how I should orient my post processing work and your help and suggestions are most welcomed.
Thank you
Panos

Herbert,
does this mean you can stitch TDMS files together?
Like this:
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Append file problem

Similar Messages

Maybe you are looking for