Append hyphen automatically after the wrapping of text in the dimension field

Post Author: Nita_here
CA Forum: WebIntelligence Reporting
I want to Append hyphen automatically after the wrapping of text in the dimension field.
e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
Thanks in advance,
Nita

Post Author: Nita_here
CA Forum: WebIntelligence Reporting
Thanks for your input.
Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
A B C
1 2 3
4 5 6
(you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
I wonder if there would be a way to do the things dynamically.
Thanks in advance,
Nita

Similar Messages

How can I separate the "Icons and Text" of the browser control buttons (Back, Forward, etc.) from the Icons on the Add-on toolbar?

At home, this is not an issue. I don't know why it's different here at work--same installation, same settings (as far as I can tell).
Windows Vista
Firefox 7.0.1
Status-4-Evar installed to turn add-on bar into a status bar
I have a NoScript add-on icon in the corner, which works fine. If I add a GreaseMonkey icon from the Customize menu, the "Icon and Text" appears for that icon, like the Icon and Text from the browser controls (Home, stop, etc). Other add-on icons also show Icon and Text (S4E, for instance). NoScript is the only one I've found so far which collapses down to just an Icon.
This leads to the status (add-on) bar having a much larger height than I like. Essentially what I want is for only the Icon to appear in the Status bar (Add-on toolbar), while keeping Icons and Text in the Browser controls. My current workaround is simply removing the other add-on icons from the status (add-on) toolbar, but that takes away the ease of toggling and setting options.
Please tell me if I can provide you with anything else, and thanks for your help.
Edit: I've got some screenshots to show what I mean.
[http://i41.tinypic.com/ftek9s.jpg desired behavior]
[http://i43.tinypic.com/1z6a4h3.jpg problem when icon is added]

Surely there must be some UserChrome.css that will solve this problem. Something like this:
/* Remove text titles for icons in add-on bar */
addonbar .button-text {
visibility: collapse !important;
Unfortunately that does not work. I probably have the button text item name wrong (there is a pound sign before addonbar but it doesn't show in this posting).

Changing the Condition type Text in the Purchase Order

Hi SAP,
Hi,
We have a requirement where by we need to change the Description of the condition type text in the Purchase order.
The condition type is a entered at item level.
Normally this description comes from the Condition type Definiton i.e., T685T-VTEXT.
can any one of you suggest a User exit or a method where by we can change this text at PO.
Has any one of you came across such situation before. if so please provide me with your inputs.
Thanks
Best Regards
ShitalD
Edited by: Shital Deshpande on Feb 21, 2010 1:07 PM

Hi,
I think it is a config setting..Please check with your functioal consultant regarding the same.. I won't suggest to change the standard SAP table T685T but you can keep it as last option .
From SPRO you can follow the below path
Sales and Distribution->Basic Functions -> Pricing > Pricing Control -> Define condition types.
Regards,
Nagaraj

Can I change the reort total: text in the summary row in a report region?

Hi all,
This might has been asked before, I tried searching the forum but couldn't find an answer. In the report attribute, if I tick the sum checkbox then run the page, the last row would give me the summary numbers which is what I want. However is there a way I can change the "report total" text in the last row of the first column?
Thanks very much for your time.
Pete

Hello user9546327,
I had the same problem, until I realised that the text seems to be printed under the first column of the report. If that one is a hidden column, the text won't be printed in the report.
Solution:
In the 'Report Attributes' tab, move the first visible column (= attribute 'Show' is ticked) to the top of the report columns.
Best regards,
Sabine

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

HT4427 how do you get the speak to text on the iphone4

How do you get the speak to text on the iphone4??

You do not... that is a feature of the 4S and 5 with Siri.

HT4528 Why doesnt my iphone 4 from Verizon have the FCC ID text on the back?

Why doesnt my iphone 4 from Verizon have the FCC ID text on the back?

Because you or someone replaced the back with an aftermarket piece maybe?
Why does it matter?

How do I split each page into a PDF and name them after a line of text on the split page?

All,
I am running a report that is creating hundreds of letters to be sent to customers. When I run the report it creates one large PDF (one letter = one page). To help with a specific business solution I need to split each page into an individual PDF. I know I can extract the pages using the extraction tool. I have also been able to duplicate this from the Javascript console, but only with generic names. The problem is that I need each PDF named after the customer's account number. The account number is listed on the page that I am extracting, but I am having a hard time parsining the text on the pages to find it.
I need to be able to turn each page into a seperate PDF and then rename that PDF to match the account number list on the page.
The account number, is of course, different for every customer and has varied prefixes. The line of text that I need to read starts like this:
Account Number#: NJA00001
I need to just pull the NJA00001.
I would really love to automate this process.
Can you help me with this? Thanks in advance.
PS: I am a little rusty on my Javascript, its been a couple years.

This can probably be achieved with a custom-made script, but it's not possible to know for sure before seeing some sample files.

Wrapping of Text in the Table UIElement

Hi
Is it possible to wrap the text in the header of a Table UIElement.Whenever a column heading is created it keeps extending on one single line. Any suggestions.
ravi

Please give a try with one of the following options..
A similar post is also available at
Newline in WDTextView
<u>Option 1</u>
1.Set the layout property of the UI element container to be GridLayout or MatrixLayout.
2.Enable the "wrapping" property of Label or TextView to "true"
3.Set the "width" property of the UI Element's(label/TV) Layout data to <integer>px [eg: 100px]
3.Build and Deploy
<u>Option 2</u>
This option is only applicable for Labels. But for any Layout.
1.Set the "width" property of the UI Element(label/TV) to <integer>px [eg: 100px]
2.Enable the "wrapping" property of Label or TextView to "true"
3.Build and Deploy
Thanks and Regards,
Sam Mathew

2 questions. can i get rid of the " thousands of add ons" dialogue box below my browser? i find it annoying,pointless and it feels like a commercial and second i want the about mozilla text at the bottom of the page gone can these 2 things be removed?

just want those 2 things to not be on my homepage. i know how to use the add ons link in the options panel why do i need a text button on my home page. and also the "about mozilla" button at the bottom of page couldnt this also be in the options panel? i just want a clean looking home page with nothing on it i didnt put there.

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

Changing the alignment of text on the Creative Zen Visio

Ok after having the Vision:M for a very long time it finally has a crack in the screen. The crack has turned into one big black blob and is on the left side which is covering up the text. Is there is a way to change the alignment of everything on the player so everything is aligned to the right side? Which would let me see artist names etc...

Hi, i have a similar situation without the icon. I have a button whose text is to be left aligned. Here is the snippet of code i have. But, it is not working.
linksButton = new JButton(link);
         linksButton.setHorizontalTextPosition(SwingConstants.LEFT);
         linksButton.setBounds(xComp,yComp,width,height);

How can I set the different boolean text in the button array?

I created the OK boolean button array. How can I change the boolean text of each button to be different at run-time? I changed one, but the others are changed also.

> Thank you for your help
> Unfortunately I'm a beginner of this software. Please you
> explain me more details.
Select the control using the positioning tool and choose
Customize... from the Edit menu or choose it by popping up
on/right clicking on the control and selecting Advanced>>
Customize...
This will open the control up in a new window -- the control
editor window. This window allows for lots of additional
control modifications and allows for them to be saved into
typedefs to promote reuse and make things more consistent.
Once in the control editor, popup on the button and select
the menu item near the bottom Multiple Text Strings.
Close the editor window and the first dialog will ask if
you would like to save the change
d file. Choose No, and a
second dialog will ask if you would like to Replace the
Original Control. Choose Yes.
At this point the Button will support multiple text labels.
To edit the True string, make the Boolean True and use the
Labeling tool to edit the string that is visible. To edit
the False string, make the Boolean False and use the labeling
tool to edit that string too.
Greg McKaskle

Error loading file in the operation long text in the General task list

Hi all,
I couldnt upload the detailed check lists in the operations (operation tab) of the general task lists through the long text uplaod via Text->Upload->RTF---> .System is throwing the following Information...
1.Error loading file " specified path with filename.rtf"
Could you please give me any idea to eliminate this.The client is having the detailed check list for each and every operation with safety measures to be taken.
Plz help.
Regards,
Suresh.

Hi all,
It was an authorisation object missing and the problem got solved.
Regards,
Suresh.

How to add the line item text in the Ledger line item report

Hi SAP Gurus,
I having one requirement from the user. He wants the line item text which we will enter in FB60/FB70/FB50 has to be shown in the Ledger line item report. Right now this field is not available. Is there any possible we can make this line item text in the ledger line item report i.e. FBL1N/FBL3N/FBL5N?
advance thanks for the help.
Regards,
Deva.

Hi,
You can do the below to get this. (You can change the names of the function modules as per your wish/ organization naming convention):-
Step 1:-
Create function module Z_GET_SGTXT as below:-
Import:-
BELNR LIKE BKPF-BELNR
BUKRS LIKE BKPF-BUKRS
BUZEI LIKE BSEG-BUZEI
GJAHR LIKE BKPF-GJAHR
Export:-
PRCTR LIKE BSEG-SGTXT
FUNCTION Z_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(BELNR) LIKE BKPF-BELNR
*" VALUE(BUKRS) LIKE BKPF-BUKRS
*" VALUE(BUZEI) LIKE BSEG-BUZEI
*" VALUE(GJAHR) LIKE BKPF-GJAHR
*" EXPORTING
*" VALUE(SGTXT) LIKE BSEG-SGTXT
SELECT SINGLE SGTXT FROM BSEG INTO SGTXT WHERE GJAHR = GJAHR
AND BELNR = BELNR
AND BUKRS = BUKRS
AND BUZEI = BUZEI.
ENDFUNCTION.
Step 2:-
Then create the Function Modules as below:-
Z_LINE_ITEMS_GET_SGTXT (Copy of SAMPLE_INTERFACE_00001650)
FUNCTION Module Z_LINE_ITEMS_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
Initialize Output by using the following line
E_POSTAB = I_POSTAB.
E_POSTAB = I_POSTAB. "<-- important
CALL FUNCTION 'Z_GET_SGTXT'
EXPORTING
BELNR = I_POSTAB-BELNR
BUKRS = I_POSTAB-BUKRS
BUZEI = I_POSTAB-BUZEI
GJAHR = I_POSTAB-GJAHR
IMPORTING
SGTXT = E_POSTAB-SGTXT
EXCEPTIONS
OTHERS = 1.
ENDFUNCTION.
Step3:-
Transaction FIBF:-
Settings -> Products -> of a Customer
SGTXT Text in Line Item Display Active
Settings -> P/S Module -> of a Customer
00001650 SGTXT Z_LINE_ITEMS_GET_SGTXT
Step 4:-
Create the layout for FBL*N with display of the TEXT.
Regards,
Gaurav

How to align text below the menu with text in the menu?

I'm trying to design a law firm site with a menu with text below it that is centered with the text in the menu. So, under "ABOUT" in the menu, there is "Meet our Attorneys". I can't get the 2 text boxes to center. When it looks centered, it moves when its FTP uploaded. Here's the site:
http://mckenzielaird.com

Hi
I checked the site and can see that under About , Meet our attorneys both are aligned centrally.
Can you please confirm me if I am missing anything here ?
Thanks,
Sanjit

Append hyphen automatically after the wrapping of text in the dimension field

Similar Messages

Maybe you are looking for