Append messages with out header tag " ?xml version="1.0" encoding="UTF-8"?
Hi all,
I am doing file to file scenario.When I use APPEND in the File adapter it is also adding <?xml version="1.0" encoding="UTF-8" ?>
I need to send a file for every 10 minutes consolidate all files and send at the end of the day.
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
The next time when i send the file with different< ID>31155</ID>
it should append ignoring <?xml version="1.0" encoding="UTF-8" ?>
The consolidated file must look like this...
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
< ID>31155</ID>
Thanks ,
Srinivas
Hey
as pointed out by everyone else,there is no straight way for this,one thing u can do is that create two separate scenarios.
in first scenario use content conversion on receiver side and keep on appending the text for 10 mins (guess this is ur pooling interval),now since ur using FCC u wont get <?xml version="1.0" encoding="UTF-8" ?>,you will get a flat file on receiver side.
after 10 mins u can have one more scenario which picks up this flat file and this time use FCC on sender side so that it will convert this flat file to XML,in this way you will get <?xml version="1.0" encoding="UTF-8" ?> only once.
hope this solves ur problem.
just make sure that you specify correct polling intervals for both the scenarios.
thanx
ahmad
Similar Messages
-
Hi,
When I am Using append mode in file adapter,for each file that i send a seperate <?xml version="1.0" encoding="UTF-8"?> tag is getting generated in the target.
eg:
File 1
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
File 2
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Result
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Here <?xml version="1.0" encoding="UTF-8"?> tag is repeated.
How to remove the same from 2nd time.so that my output file is displayed as follows
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<DEPT>
<name>e2</name>
</DEPT>
Thanks in advance
sreeHi
Did you check the occurence of DEPT Node as 0..unbounded???
Did You check the output from Test tab of Message Mapping???
Did You use the Node function in mapping???
if not
You better use either Java mapping
with regards
Gabriel -
Adding " ?xml version="1.0" encoding="UTF-8"? " in generated xmls
Hi,
I am using xmlbeans framework to generate xmls , i am able to generate xml using document object but header "<?xml version="1.0" encoding="UTF-8"?>" is not coming in that xml file , how to include this in output xml files.Hi,
I don't know the XMLBeans Framework, but this header is called XML declaration.
In general there are options to configure this (i. e. setOption("omit-xml-declaration", false);).
Anyway, I don't know the exact syntax in this framework but have a look at this, maybe it helps somehow.
http://xmlbeans.apache.org/docs/2.0.0/reference/org/apache/xmlbeans/XmlOptions.html#setSaveNoXmlDecl()
Best Wishes
esprimo -
Client Java Proxy - ?xml version="1.0" encoding="UTF-8" tag missing
Hi All,
I have a Java Proxy to File scenario. I am getting the output in the SAP XI but when i check the XML payload <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> is missing from it. Rest of the document is coming fine.
Any idea how to fix it up?
Thanks and Regards,
Anurag Mahendru.Here it is:
Re: ABAP Proxy -> XI - > File on a Website
As I know, this is still on discussion, if the Java Proxy generation will be replaced by web service proxy generation.
But existing Java Proxy applications definitivley will run in PI 7.1 as well.
Regards
Stefan -
is it possible with SYS_XMLGEN and xmlelement
to change the xml tag <?xml version="1.0"?> and add a encoding attr like <?xml version="1.0" encoding="UTF-8" ?>
when making xmltype from a query?select xmltype( '<?xml version="1.0" encoding="UTF-8" ?>' ||
xmlelement( "xx", dummy ).getclobval()
).getclobval()
from dualCode like this will result in a CLOB, which uses the characterset of the database and NOT the characterset specified in the encoding of the XML-header
Anton -
Hello all,
The spools of a SmartForm that I developed are missing the line:
<?xml version="1.0" encoding="utf-8" ?><sf>
The spool starts with:
<smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
The Functional Counsultant wants the spool to look like:
<?xml version="1.0" encoding="utf-8" ?><sf><smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
Only such a spool can be printed successfully. If the line is missing, no print out can be taken.
Could you please tell me what settings need to be done in order to see the missing line in the spools?
Thanks and regards,
Ameya
Edited by: Ameya_Tulpule on Mar 9, 2011 8:58 AMhii,
http://help.sap.com/saphelp_nw70/helpdata/en/a5/28d3b6d26211d4b646006094192fe3/content.htm
Go to this link click under Activating XSF Output
statically
dynamically
Overriding the Output Format
Desired Output Format
Settings for Overriding
Standard output
(OTF)
XSFCMODE = 'X'.
XSF = SPACE.
XDFCMODE = 'X'.
XDF = SPACE.
XSF
XSFCMODE = 'X'.
XSF = 'X'.
XDFCMODE = SPACE.
XSF+HTML
XSFCMODE = 'X'.
XSF = 'X'.
XSFFORMAT = 'X'.
XDFCMODE = SPACE.
XDF
XDFCMODE = 'X'.
XDF = 'X'.
XSFCMODE = SPACE.
Matching Parameters for Static Attributes
Output Format
Input Field in Form
Parameter of Structure SSFCOMPOP
(possible settings)
XSF
Output mode
(for XDFOUTMODE='S')
XSFOUTMODE ('S'|'A')
Output device
XSFOUTDEV
XSF+HTML
Output mode
XSFOUTMODE ('A')
BSP page/URL
XSFACTION
XDF
Output mode
XDFOUTMODE ('S'|'A')
Output mode
(for XDFOUTMODE='S')
XDFOUTDEV
regards,
Sridhar.V -
Hi, I have a message which must contain XML inside XML, this internal one must start off with the <?xml version="1.0" encoding="utf-8"?> string.
Is there a nice trick for inserting this before an element? (not at the beginning of the mapping, a specific place further inside the XML).
All of the other elements are mapped as part of the message type.Did you check Message Mapping : Play around with target structure .
You can do this easily with UDF.
public String setPrevalue(String var1,Container container) {
StructureNode node = ((StructureNode) container.getParameter("STRUCTURE_NODE"));
node.setPreValue("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
return""; -
Can anyone spot where I'm going wrong?
I'm creating a DOMDocument like this:
Document document = null;
DocumentBuilder doc_builder = null;
try
doc_builder = factory.newDocumentBuilder();
catch(ParserConfigurationException e){/* deal with exception*/}
document = doc_builder.newDocument();Adding various stuff to it, then saving it like this
Source source = new DOMSource(document);
Result result = new StreamResult(idx);
Transformer xformer = TransformerFactory.newInstance().newTransformer();
xformer.setOutputProperty(OutputKeys.METHOD, "xml");
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes"); //??????
xformer.setOutputProperty(OutputKeys.ENCODING, "ISO-8859-1");
xformer.setOutputProperty(OutputKeys.INDENT, "yes");
xformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
xformer.transform(source, result);All the usual stuff.
But how do I get it to write:
<?xml version=\"1.0\" encoding=\"UTF-8\"?>
at the top of the page?
One further thing...
If I have nothing to write in my xml file, it just spits out a blank file.
Instead, I want it to write:
<?xml version="1.0" encoding="UTF-8"?>
<upIdx/>
a simple:
document.createElement("upIdx");doesn't appear to do anything if the block "upIdx" is subsequently empty.
Many thanksduugggh....
(well it is friday evening.. ... long week.. all that kind of stuff)
how stupid of me....
to answer my own question, it was here:
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no"); //??????
xformer.setOutputProperty(OutputKeys.VERSION, "1.0");
xformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8"); -
Why does the header with encoding set to UTF-8 get rejected by the Oracle XML C++ V2 Parser when one of the features of this version is UTF-8 support?
Hi
If I change my document header from <?xml version="1.0" encoding="UTF-8"?> to <?xml version="1.0"?> then it parses without error. Will this situation change if I intall ORACLE_HOME? If so, why do I need to install ORACLE_HOME to get the XML Parser to work?
Thanks.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xmlteam ([email protected]):
Hi,
Do you have your ORACLE_HOME set up correctly?
Thanks,
Oracle XML Team<HR></BLOCKQUOTE> -
?xml version="1.0" encoding="UTF-8" ? is missing
HI,
My scenario:
Http Post ->PI---->Siebel
When they post from source to PI. In source file <?xml version="1.0" encoding="UTF-8" ?> is missing.
It is failing in Request Message Mapping step in pipeline.
Can we append this <?xml version="1.0" encoding="UTF-8" ?> when it is coming to PI.
Kindly tell me how to acheive this issue.
Take care.
PreethaHi aamir,
I did exactly what u told but i am getting following error in pipeline step - Request Message mapping
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>mapping/Mapping.xsl</SAP:P1>
<SAP:P2>http://abc.com/LMIChat</SAP:P2>
<SAP:P3>eed947a0-59c5-11de-b473-f9eb401c9ba9</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Trace Info:
Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Transformer configuration exception occurred when loading XSLT mapping/Mapping.xsl (http://abc.com/LMIChat, eed947a0-59c5-11de-b473-f9eb401c9ba9, -1) at com.sap.aii.ibrun.server.mapping.MappingPool.checkOut(MappingPool.java:114) at
Aamir what i need to do now.... Will there be any error in code.... -
Hi,
I am using following SQL query to generate output from XML
select
XMLTYPE
('<?xml version="1.0" encoding="UTF-8"?>'||
xmlelement("bank",
XMLATTRIBUTES('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
'http://www.XXXX.xsd' AS "xsi:nonamespaceSchemaLocation" ),
xmlelement("Transaction",
xmlforest(
intraday "MessageCode",
actnum "ToAccountNo",
v00090 "ToBranchCode",
v00230 "CurrencyCode",
amt "Amount",
trandt "TransactionDate",
valuedt "ValueDate"),
xmlelement("CustomerRefNo",
xmlforest(
utr_number "ReferenceNo1",
ref1 "ReferenceNo2",
ref2 "Custtype",
r1 "SequenceNo"
x1
from
It is working fine but '<?xml version="1.0" encoding="UTF-8"?>' it is not coming as header of output My output is coming like
<bank xmlns:xsi="http://www.w3.org/2001/XMLSchema" xsi:nonamespaceSchemaLocation="http://www.XXXX.xsd">
<Transaction>
<MessageCode>0100</MessageCode>
<ToAccountNo>012340123456</ToAccountNo>
<ToBranchCode>01234</ToBranchCode>
<CurrencyCode>INR</CurrencyCode>
<Amount>11.00</Amount>
<TransactionDate>2007-01-15T17:54:31</TransactionDate>
<ValueDate>2007-01-15</ValueDate>
Kindly help.
PJPTry using the XMLRoot function.
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb13gen.htm#sthref1566 -
HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?
Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
ArmanHi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna -
?xml version="1.0" encoding="UTF-8"? coming twice in payload
Hello SOA Gurus,
I am working on a BPEL process, which produces message in JMS Queue and another process consumes the same.
Issue I am facing is
*<?xml version="1.0" encoding="UTF-8"?>*
*<?xml version = '1.0' encoding = 'UTF-8'?>*
<Exception xmlns="http://xmlns.xxxx.com/EBS/xsd/ExceptionDetails">
<InterfaceID>001</InterfaceID>
<InterfaceName>Test Interface</InterfaceName>
<KeyID>000001</KeyID>
<KeyName>Emp ID</KeyName>
<FaultName>DOB Missing</FaultName>
</Exception>
XML Encoding is getting populated twice, Can anyone help me if fixing this.
Thanks,
Sunilplease let us know,how you are trying to copy the variables.
-
XML - including: " ?xml version="1.0" encoding="UTF-8"? "
When I parse an XML document and output:
#xmlCode.XMLRoot.property.autoID#
I get this line before every field: <?xml version="1.0"
encoding="UTF-8"?>
eg.
<?xml version="1.0" encoding="UTF-8"?>
<autoID>19</autoID>
<?xml version="1.0" encoding="UTF-8"?>
<autoID>53</autoID>
<?xml version="1.0" encoding="UTF-8"?>
<autoID>59</autoID>
How do I stop this? I just want the number from the field.
I also don't understand why it is UTF-8 when I specify
iso-8859-1.If you use the CFXML tag, you dont need to do the <?xml
version='1.0' encoding='iso-8859-1'?> line in your code. It will
do it for you automatically.
Remove it and it should be fine.
EX:
<cfxml variable="rsPropDataXML" casesensitive="no">
<allData>
<cfoutput query="rsPropData" maxrows="20">
<property>
<autoID>#rsPropData.autoID#</autoID>
<Tour>#rsPropData.Tour#</Tour>
</property>
</cfoutput>
</allData>
</cfxml> -
PRC: Create Accounting Output shows "xml version="1.0" encoding="UTF-8"
I m getting Error in the Output of Create Accounting like <?xml version="1.0" encoding="UTF-8" ?>
Any one have some Clue ...Hi,
It is a bug, and an enhancement request (6354170: ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES) was created for this issue. Check Metalink and see if the patch is released or not, or you may log a SR to confirm the status of this bug with Oracle support.
Bug# 6354170 - ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=6354170
Regards,
Hussein
Maybe you are looking for
-
How to change the NAT type to Open on a Imac using bridged connections
Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i conne
-
Outgoing payment vs invoice due date
Dear Forum, Our management wants to get historical due date outgoing payment compare to invoice due date. So we know if out finance paid accordingly based on the invoice due date. The fields ; Invoice Number Invoice Date Invoice Value
-
I talked to Hughes net and they said it was with foxfire and it was not compatible with the new changes to e-mail accounts == This happened == Every time Firefox opened == This afternoon
-
I have a mid 2010 Macbook Pro a1278. When I plug in the magsafe it is green and then changes to orange and charges the battery. As soon as I hit the power button the light goes to green for about 10s and then back to orange. The macbook does not star
-
Split a column based on even and odd rows
Table1 Table2 Col1 Odd Even A A B B C D C E F D G H E I NULL F G H I I am using MS SQL v2005 I want to split a column into two columns : - one column must have all the odd rows data while the other column must ha