Append Structure to MCCOMP but not appear in Extract Structure (LBWE)

Dear Experts,
We are using the datasource 2LIS_04_P_COMP
1) We append a field into MCCOMP and MCCOMPB, but that field doesn't appear in the pool of communication structure fields. Therefore, we cannot move from the pool (right side) to extract structure (left side)
2) We need to add a field into MCCOMP, as we need to capture Delta for this field. Is there any user exit that can populate value for this structure?

Hi,
Follow the steps.
1. Delete Setup tables in LBWG.
2. Clear Q in SMQ1/LBWQ.
3. Delete Q in RSA7.
Then fine the ECC correct client for Customizing and there you can do the changes and activate it. If still it is not allowing and you want to add fields by using enhancements then goto SE11, and give MCCOMP and Append Structure and add fiels and write code in CMOD.
Thanks
Reddy

Similar Messages

  • FIREFOX IS RUNNING BUT NOT APPEARS

    FIREFOX IS RUNNING BUT NOT APPEARS Hello, I'm with problem after I updated Firefox to version 3.6.4 and then to 3.6.6, 3.6.8 and also installing direct either version. Is the following, simply I click on browser shortcut and it doesn't open, ja tried everything, reinstalled, spent registry cleaners, ja installed straight from the website and nothing. Versions prior to version 3.6.4, please send to my email [email protected] , [email protected] Thank you

    Versions prior to version 3.6.4, install and run normally, but the subsequent install but do not work in Task Manager, it appears as if it had opened, but the desktop is as if it were closed and does not respond. I installed the pre-alpha version 4.0.3 and happened the same thing. Please give me a light, ja I consulted on the Internet and I didn't find nothing. Already deleted the profile and created another, ja deleted the folder profiles and none of it solved. Never seen similar problem

  • Hi, i am from UAE. I buy iphone 4 yesterday but i cant able to activate. when i insert iphoone to itunes informing sim inserted but not appears to be supported. what can i do pplz help...........

    Hi, i am from UAE. I buy iphone 4 yesterday but i cant able to activate. when i insert iphoone to itunes informing sim inserted but not appears to be supported. what can i do pplz help...........

    From where did you buy the iphone?
    What country?
    What store?
    An Apple store? Official Apple reseller?
    Why do you think it is unlocked?

  • Some contacts appear in the search but not appear in the contacts

    Some contacts appear in the search but not appear in the contacts and same not appear in iCloud. Using iPhone 4 iOS 5.1

    See if either of these help:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_The_list_of
    http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

  • I am using Office for MAC 2008, when I switch to other applications on my MAC and then go back to Office window it never brings me back to the window I was working on.  I have to click on the Window tab, but my window is ticked but not appearing. Why?

    I am using Office for MAC 2008, when I switch to other applications on my MAC, to copy and paste something for instance and then go back to Office window it never brings me back to the window/worksheet I was working on.  I have to click on the Window tab in excell for instance, but my window is ticked but not appearing. I then have to click on one of the other open files and then click back to the sheet I was working on for it to appear.  Can any one tell me why?

    Does that happen only on web pages that are running a Flash presentation? <br />
    When Flash "steals focus" from Firefox, you need to click outside the Flash presentation in the browser window, to regain focus in Firefox. A major problem arises when the Flash presentation is in the entire browser window, though. The Firefox developers are working on fixing that in Firefox, but it doesn't look like a fix is going to make it into Firefox 4.0, though.

  • Structure maintenance not provided for Extraction structure MC02M_SCN

    Hi BW Experts,
        I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you please help me on this.
    Thanks in advance.
    Thanks,
    Ram.

    Hi,
    In LBWE for some of the DS Structure is not provided by the SAP.
    So For the mentioned DS "CGR" you can't see the structure from LBWE .
    Enhancement will be done based on extractstructure.
    Two ways 1. Through RSA6
                       2. TAKE THE EXTRACT STRUCTURE NAME OF " CGR" DS from RSA6 and append the fields in SE11.
                       3. Append the fields to the DS Extract strcuture " MC02M_0CGR" in se11
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 30, 2009 5:28 AM

  • PLIKZ field for COPA data source not there in Extract structure.

    Hello all,
    When I create a data source for COPA the PLIKZ field from the segment level is not maintained in the Extract structure and it is not replicated to BW also. But the other field GJHAR is maintained in the Extract structure which is also there in the segment level!!
    Clarify me why it is not available in extract structure? Also we are in 4.7 version and 3, 5 in BW.
    Points will be assigned!!!
    Thanks
    Ram

    Hello Friends,
    Could some one help me why the field PLIKZ is not available in the Extract structure when i create a COPA Data source?
    Need ur suggestions urgently!!!
    Helps please
    Thanks in advance once again

  • Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

    I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
    What could be causing these not to appear in the cross reference pane?
    Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
    Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
    Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
    Technical Details:
    InDesign CS5.5 - Version 7.5.3
    Microsoft Word 2010, File type .docx

    I have found the possible cause of this problem!
    If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
    So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
    I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
    InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

  • IPod recognised by windows, but not appearing in iTunes

    My sister recently bought an iPod nano so we have both been using the same computer, different user areas for our iTunes. However, there is some conflict between them somehow as now the iPod is not appearing in iTunes but is appearing as a hard drive.
    My iPods an old 20gb one so I'm guessing that's got something to do with it, the iPod software doesn't work for both of them.
    I just got a laptop today so I'm copying my music over using the iPod as a hard drive so it's not such a problem for me but I want to sort it out for my sister. How can we make the iPod appear in iTunes?
      Windows XP  

    Change the drive letter to something higher, like M.

  • Newly added OAF region is shown in Worklist but not appearing in Email...

    Hi,
    We have a very serious issue in our applications. We have customized Requisition Approval workflow and in the Requisition approval notificaiton, added one extra OA Framework region attribute. The region fetches some value from a custom table and renders it. This region is perfectly alright when seen from the worklist. But the email that is sent for the same notification, the region is not appearing !
    We have checked a lot but unable to find what we are missing here. If it is a problem with the region, then it shouldn't appear in worklist too. The strange thing is that this was working (region was appearing in email) in one instance. When the same code were moved to another instance, it is not working (region is shown only in worklist). Please help me as this is very urgent for us.
    Thanks,
    Arun

    OK, there is other way to check.
    1) Take the notification framework region URL from the Workflow Mailer log ( log should be STATEMENT level)
    2) and copy / paste same URL in a web Browser ( you may login as SYSADMIN user)
    3) and see if newly added region comes?
    Just check if you bounced the iAS after apply the changes on that instance.

  • Mails phisically in the server but not appearing in webmail and reconstruct

    Hello:
    Solaris 10 8/07 s10x_u4wos_12b X86
    Sun Java System Messaging Server 6.3
    The user deleted every single mail from his mailboxes via webmail. Every folder appeared empty in the webmail, the inbox, recycle bean, sent mails... all of them (I checked it). However, it stated that the quota usage was 50%. That was because in the server there were 50 MB of .msg files, and the user's quota is 100 MB. I don't know why happened that, as far as I know, if the .msg files were expunged messages, they shouldn't count for the quota usage, is that right?
    Anyway, I removed the messages using rm, then imexpire and reconstruct -r user/username/INBOX. I sent two emails to the user with attached files, they were correctly received and the quota usage changed right (files size was 2 MB, so quota usage was 2%). I deleted the messages via webmail, I was able to see them in the server but did not appeared via webmail, and the quota was right, so everything seemed to be OK.
    The weird thing is:
    root@machine # reconstruct -n user/username/INBOX
    user/username/INBOX
    ERROR: Inconsistent information: 0 idx records 2 messages 3 expunged
    So, I run reconstruct -n user/username/INBOX, it finds the problem, it shows something like "reconstructing: OK", but if I run the reconstruct -n again, it still show the "Inconsistent information" error. ¿? What am I missing?
    Any help would be really appreciated. Thank you very much, and I apologize for my poor English.

    Sorry for the incomplete info:
    shjorth wrote:
    Deprecated wrote:
    Sun Java System Messaging Server 6.3What is the exact version (./imsimta version)?
    The user deleted every single mail from his mailboxes via webmail.Which webmail? UWC/CE or Messenger Express?
    Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
    libimta.so 6.3-6.03 (built 17:07:13, Mar 14 2008; 32bit)
    SunOS mail1 5.10 Generic_137112-03 i86pc i386 i86pc
    Webmail is UWC.
    Every folder appeared empty in the webmail, the inbox, recycle bean, sent mails... all of them (I checked it). However, it stated that the quota usage was 50%.Where did it state the usage was 50% -- it may be you were seeing an old cached value?
    Did you verify this output with the output of mboxutil/imquotacheck for the account?
    The 50% quota usage was reported in UWC and also in the output of mboxutil.
    That was because in the server there were 50 MB of .msg files, and the user's quota is 100 MB. I don't know why happened that, as far as I know, if the .msg files were expunged messages, they shouldn't count for the quota usage, is that right?The ".msg" files are not removed from disk until the next imexpire run. If a message is expunged it won't count towards quota usage.
    Right, because of that I don't understand why there were ".msg" files in the disk that were not displayed in UWC, as they were expunged, but they did count towards quota usage.
    Anyway, I removed the messages using rm, then imexpire and reconstruct -r user/username/INBOX. I sent two emails to the user with attached files, they were correctly received and the quota usage changed right (files size was 2 MB, so quota usage was 2%). I deleted the messages via webmail, I was able to see them in the server but did not appeared via webmail, and the quota was right, so everything seemed to be OK.
    The weird thing is:
    root@machine # reconstruct -n user/username/INBOX
    user/username/INBOX
    ERROR: Inconsistent information: 0 idx records 2 messages 3 expunged
    So, I run reconstruct -n user/username/INBOX, it finds the problem, it shows something like "reconstructing: OK", but if I run the reconstruct -n again, it still show the "Inconsistent information" error. ¿? What am I missing?
    -n          : report basic errors found but try not to rebuild most folder files if possible
    (This may be used to catch errors before repair so they may be studied)If you run "reconstruct user/username/INBOX" was the mailbox fixed?Well, the mailbox is working fin, but I think that there's something that I'm misunderstanding. I'm really newbie in SJS Messaging Server. The -n flag is for report errors only, without performing any repair, isn't it?
    http://docs.sun.com/app/docs/doc/819-4429/acmeb?a=view :
    Checks the message store only, without performing a fix on the mailbox or mailboxesCommand help:
    -n          : report only, no repairAnd the -r is for recursively repaire the mailbox, right? So, if I run the reconstruct -n and it found a problem, then I run the reconstruct -r and it said that the reconstruction was OK... When I run the reconstruct -n again, why did it find an inconsistency again? I don't get it.
    Anyway, I don't see that problem now:
    root@machine # reconstruct -n user/username/INBOX
    username/INBOX
    >
    Regards,
    Shane.Thank you for your kind help.

  • I have bought a Bose soundlink AirPlay which is set up correctly but not appearing on my air playlist. However my apple TVs are. Anyone got any idea?

    I Have bought a Bose Soundlink AirPlay which is connected to my home wifi. My MacBook, iPad and iPhone are all connected to the same wifi. The Bose sometimes shows up on the AirPlay list but mlst of the time does not appear. I have 2 Apple tvs which show up in the list but the Bose seems to be the problem. Does anyone have any idea what the problem may be?
    any help would be greatly appreciated

    Try this:
    1. Turn off router, AirPlay Speaker and iPad
    2. Turn on router and then wait 30 seconds for it to complete start-up process
    3. Turn on AirPlay Speaker and then wait 30 seconds for it to complete start-up process
    4. Turn on iPad and test AirPlay Speaker

  • Dates Appearing in Tabular Model but not appearing on Pivot table

    Hi all,
    I am using SSAS tabular Model 2012, in tabular model all dates are appearing correct in date column but not when i drag attribute to my pivot table it shows only one date. Does anyone has the solution of this issue.
    Regards,
    Piyush

    Hi Piyush0308,
    According to your description, you have date column displayed all dates correctly in Tabualr. When showing in a Excel Pivot table, it only get the first date. Right?
    In this scenario, firstly please check the source table data in database, then make sure the data type of this column is Date in Tabualr. In Excel, please make sure there's no aggregation setting on this field. As I tested in our local environment, it should
    display same thing in tabular.
    If the issue still persists, please share some information about your date table so that we have some deep analysis.
    Best Regards,
    Simon Hou
    TechNet Community Support

  • I canu00B4t modifyRowInDB, but not appear error...

    Hi, i have a problem... i´m doing a SmartSync Project, and i want modify a row with the method modifyRowInDB.
    My steps are:
         public void modificarIMP (String BO, String m, Vector lista) {
              for (int i = 0; i < lista.size(); i++) {
                   try {
                        dbAccess.modifyRowInDB(BO,(String)lista.elementAt(i), m, 4);
                   } catch (SmartSyncException e) {
                        e.printStackTrace();
                   } catch (PersistenceException e) {
                        e.printStackTrace();
    lista = Vector of SYNC_KEY
    m = new value
    4 = column for modified
         public void modifyRowInDB(
              String syBName,
              String syncKey,
              String newValue,
              int col)
              throws SmartSyncException, PersistenceException {
              String syncBoName = syBName;
              // Set default Syncboname for this example in case value is null.          
              SyncBo syncBo = getSyncBoInstance(syncBoName, syncKey);
              SmartSyncTransactionManager transactionManager;
              // A transaction manager is valid for one action starting with beginTransaction and ending with commit/rollback
              // In this example we commit (save) every modification - no rollback.               
              transactionManager = dataFacade.getSmartSyncTransactionManager();
              transactionManager.beginTransaction();
              setHeaderFieldValue(syncBo, arrayHeaderFieldNames[col], newValue);
              //Commit the transaction          
              transactionManager.commit();
    Not appear error, but not modify the row, what happend?
    Thanks,

    Hi Victor,
    You are trying yo modify a row but the chages are not appearing. It may be due to conflict between client and backend. In case of conflict backend wins. So it may be a case of conflict in which your changes are not appearing.
    Regards,
    Gopal.

  • "Result" row not appearing for the Structure record in Bex Designer.

    Hi
    In BI BEx Designer,
    under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
    But i am not finding this thing for the structure.
    Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
    Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
    Thanks...

    I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
    for the other query, yes i do KF in the report.
    thanks

Maybe you are looking for