Appending to a file accessed using a URLConnection

Hello,
I have a server hosting a text file, and I want to write a program that connects to the server and appends data to the end of this file. The problem is that URLConnection does not support appending data to the file, but just overwriting it.
Is there another way to append data to the file?
Thanks.

Hello,
I have a server hosting a text file, and I want to
write a program that connects to the server and
appends data to the end of this file.That would be the server's job to do that.
Is there another way to append data to the file?Yes. Have a server process and let that append the data it receives to the file using a file writer.

Similar Messages

.vi files access using Labview Communication Suite

Can't I access labview files from Comm Design suite?
What I see is it has got all the functionality I would be needing to program a USRP which I other wise use to do with Labview. Why .vi files are not being supported by cmm suite?
2. If I want to design a system comm suite is enough or I still need to buy Labview Package?

Hello Wired_,
With regards to your second question, LabVIEW Communications will allow you to design, develop, and test your communication algorithms. With this software, you will not be able to build your application into a executable format outside of LabVIEW Communications.
Regards,

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Open VDW files stored on file share using Visio Web Access

Hi,
Is it possiblwe to view VDW files that are stored in a file share using Visio Web Access in SharePoint?
If so, how?
Opening up a Visio Web Drawing stored in a SharePoint document library is straight forwards however I want to view a visio web drawing stored in a file system using the web access service.
Hope I'm made myself clear.
MDB

Hi Jens,
I will suggest you to call the support center, cause there are some bugs related to the issue you are having.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Regards.

Using get -childitem to scan different drives but append one text file.

Folks,
I need some help, I wrote the below to scan for certain files types on client machines but I cant get the script to scan anything other than the C$. Apologies I am kind of new to scripting and PS. The script is kicked off using a batch file that makes the
CR directory on the clients. I think the problem stems from the $disk variable or the way I have used foreach or the loop - any help would be appreciated
Set-Location c:\
$s = new-object -comObject SAPI.SPVoice
$s.speak("Scan in progress")
write-host "Scanning for files"
$Extension = @("*.zip","*.rar","*.ppt","*.pdf")
$Path = "$env:userprofile\Desktop"
$disks = "c$","D$"
foreach ($disks in $disks)
{get-childitem -force -include $Extension -recurs -EA SilentlyContinue >$path\files.txt}
$s.speak("Scan completed")
Write-Host "Scan complete, files.txt created on your desktop - press any key to exit..."
$x = $Host.UI.RawUI.ReadKey("NoEcho,IncludeKeyUp")
Remove-Item c:\cr -recurse -EA SilentlyContinue
exit

Then there is "$x = $Host.UI.RawUI.ReadKey("NoEcho,IncludeKeyUp")" , What are you trying to do?
It looks like that is a pause after the code has completed to give the user time to read the message prior to exiting.
@V Sharma - As gaff-jakobs has mentioned, there are some parts of your code that need looked at. Please take a look at what he has advised and make the necessary changes. If you want to append data (doing a > does not append), I would look at using Out-File
-Append -FilePath <filename> to accomplish this.
Usually, outputting to a text file limits what you can do with the output once it goes to a text file. I would look at using something such as Export-Csv -Append -Path instead (assuming you are running PowerShell V3). But if saving to a text file is part
of your requirement, then just be sure to use the first method I mentioned.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

See Terence Devlin's thorough explanation here.

Append file name using FileSelectPopup under Windows 7

Hi,
I saw the following thread for the same issue in Vista, just wanted to make sure that this issue has been fixed for Windows 7 also before I upgrade to the latest version.
http://forums.ni.com/t5/LabWindows-CVI/Append-file-name-using-FileSelectPopup-under-Windows-VISTA/m-...
Thanks,
Karthik
Solved!
Go to Solution.

Hi,
I ran across that issue when I was running applications built under CVI 7.1.1 on Windows 7. I can verify that rebuilding the application under CVI 2009 SP1 and later CVI 2010 fixed the issue. So you should be ok.

Can I access time capsule file without using imac

can I access time capsule file without using imac

From a time machine backup? No. If you mean just a regular file stored on there? Not directly. There are a couple of apps out there where you can indirectly get to a file but it's a pain. If you have need of accessing a file both from the mac and the iPad then I suggest DropBox. You get 2GB free and it's a good way to share information between machines and devices.

Append to jar file using java codings

Hi,
I have codings which could create jar file and write datas in it. but i need to append datas to existing jar file using java codings.Here i have attached my codings which will write datas to new jar file. when ever i use this my existing contents gets overritten. wat can i add to this to append.
FileOutputStream stream = new FileOutputStream(archiveFile,true);// archive file is jar file name
     JarOutputStream out = new JarOutputStream(stream, new Manifest());
JarEntry jarAdd = new JarEntry(tobeJar.getName()); // tobejar is a file to write in jar.
jarAdd.setTime(tobeJar.lastModified());
               out.putNextEntry(jarAdd);
               // Write file to archive
               FileInputStream in = new FileInputStream(tobeJar);
               while (true) {
               int nRead = in.read(buffer, 0, buffer.length);
               if (nRead <= 0)
               break;
               out.write(buffer, 0, nRead);
               out.closeEntry();
out.close();

JarInputStream in = new JarInputStream(new FileInputStream(oldJarName), true); // oldJarName is the JAR that contains all the files we want to keep
JarOutputStream out = new JarOutputStream(new FileOutputStream(tempJarName)); // this is your "out" variable
// copy the files from the old JAR to the new, but don't close the new JAR yet
JarEntry inEnt;
while ((inEnt = in.getNextJarEntry()) != null) {
JarEntry outEnt = new JarEntry(inEnt); // copy size, modification time etc.
byte[] data = inEnt.getSize();
in.read(data); // read data for this old entry
in.closeEntry();
out.putNextEntry(outEnt);
out.write(data); // copy it to the new entry
out.closeEntry();
// now write an entry for the file we want to append - this is the OP's code
JarEntry jarAdd = new JarEntry(tobeJar.getName()); // tobejar is a file to write in jar.
jarAdd.setTime(tobeJar.lastModified());
out.putNextEntry(jarAdd);
// Write file to archive
FileInputStream in = new FileInputStream(tobeJar);
while (true) {
int nRead = in.read(buffer, 0, buffer.length);
if (nRead <= 0)
break;
out.write(buffer, 0, nRead);
out.closeEntry();
// and *now* we close the new JAR file.
out.close();
// We then delete the old JAR file...
new File(oldJarName).delete();
// ... and rename the new JAR file to use the old one's name.
new File(tempJarName).renameTo(new File(oldJarName));

Appending multiple xml files to single xml file using File channel?

Hi Experts,
I would like to get some pointers around xml files append.
My sender application will send around 1000 messages through SOAP per day. But the target application needs single xml file formed by consolidation of all these 1000 files.
I tried with txt files and the receiver file channel could append the txt files. However, since xml files allow only one root node, I am not able to achieve the requirement.
Is there any option we can do to get the result?
The target file location is UNIX folder. Do we need to create any shell script to run from the channel for appending the file?
Do we need to use any XSLT mapping to strip the xml declaration tags and append the files. Once the single file is ready, using another file channel with XSLT mapping, insert a dummy root node and xml declaration tags to build an xml file?
Any thoughts to get the result will be much appreciated.
Thanks
Ray..

Hi,
You have two options
1)Using Receiver Sender File channel select mode append it does the job.
Option 2:
Using BPM we cann collect all messages per day and club them as a one message, in this case create Target data type root node occurance 1 to unbounded. so it cal hold multiples SOAP messages in only XML messages.
search in sdn for BPM collect pattrersn,its very simple .
Option 3:
Create scheell script in OS level and write a logic to append all files planced in FTP.
Regards,
Raj

How to append two CSV files using ftp

Hi
Please let me know the FTP command to append the two .CSV files into one .CSV file.
e.g.
Let me explain:
one CSV file has the fields F1 , F2, F3 , F4 and has 5 records
another CSV file has the same sequence of fields F1, F2, F3, F4 and has 10 records
after appending both the files , I must get 15 records.
Thanks
Alok

Ok I will try out.
I am illustrating my requirement as follow
File#1 (type .CSV)
F1     F2     F3     F4
100   566    89     86
235   256    56     12
File#2 (type .CSV)
F1     F2     F3     F4
56     56     98     102
12     23     36      523
23      56     56    89
Now we want to Append File#1 to File#2 as follow:
F1    F2    F3     F4
100   566    89     86
235   256    56     12
56     56     98     102
12     23     36      523
23      56     56    89
Please suggest now that which command would be appropiate.
Alok

Append to HTML file

Hi,
I have a VI that controls a stepper motor attached to a camera. I want people to be able to access this camera and control its position through the web. Is there any way to append an HTML file or icon from labview and rotate the camera with the data sent from the web?
Thank you for your help.
Guillermo Naranjo
Solved!
Go to Solution.

I tried using the labview web publishing tool like you suggested, but when I tried to preview the page (even with the VI running) I only get the border of the front panel without the VI in it. Do you know why this is happening?
Thank you for your help.
Guillermo Naranjo
Attachments:
frontpanel.jpg ‏29 KB

Files in use by Apache clients

I have a Mac Mini working as a web server using the built in Apache Server. I use the Console.app to read the access.log file and have a view of the traffic, but sometimes I would like to know exactly which are the files that the clients are at the moment. Is there a way? A program or something? Thanks.

There it is (complete). It is completely standard, aside of the server-status activation and some new icons addeed:
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 5
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 1
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
#LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
LoadModule rendezvousapplemodule libexec/httpd/modrendezvousapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
#AddModule mod_php4.c
AddModule modhfsapple.c
AddModule modrendezvousapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User www
Group www
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName blaze
ServerName MacMini1250
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Library/WebServer/Documents"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
Deny from 164.77.242.124
Deny from 147.156.17.133
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /Users/*/Sites>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
IndexOptions NameWidth=40
# IndexOptions IconsAreLinks
IndexOptions FoldersFirst
IndexOptions SuppressDescription
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/textx.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
#AddIconByType (SND,/icons/sound2.gif) audio/*
#AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/textx.gif .rtf
AddIcon /icons/fp5.gif .fp5
AddIcon /icons/sit.gif .sit
AddIcon /icons/winmp.gif .wmv .mpg .mpeg .mpe .m1v .mp2 .mpv2 .mpa .ivf .fxa .fxm
AddIcon /icons/mp3.gif .mp3
AddIcon /icons/bomb.gif core
AddIcon /icons/real.gif .swf .ra
AddIcon /icons/mplay.gif .avi .rm
AddIcon /icons/movie.gif .mov .mp4
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_php4.c>
# If php is turned on, we repsect .php and .phps files.
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
# Since most users will want index.php to work we
# also automatically enable index.php
<IfModule mod_dir.c>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule modrendezvousapple.c>
# Only the pages of users who have edited their
# default home pages will be advertised on Rendezvous.
RegisterUserSite customized-users
#RegisterUserSite all-users
# Rendezvous advertising for the primary site is off by default.
#RegisterDefaultSite
</IfModule>
Include /private/etc/httpd/users/*.conf

Not Working: BlackBerry Link Remote File Access Remove Old BlackBerry from BB ID

I have: removed my blackberry q10 from blackberry link, wiped my q10, uninstalled and reinstalled blackberry link, have link version 1.1.1.32, blackberry q10 os version 10.1.0.2309 - which whenever I plug in the q10 after removing the device from link, says there is an os update, so I update it, and then it does nothing apart from rebooting the q10, or gives an error saying 'updates not available. Please check internet connection and retry.'.
Also, I have Logout/login on blackberry link, I know my q10 is activated as I have purchased items from app world, and on the computer the app world site shows that I have a q10 when I sign in. I am using the same BBID and have changed the password on my q10 to see if that made a difference, then signed out and back into link on computer with updated password. I have administrator rights on my computer.
I can access the q10 from my computer over the same wifi network, and it syncs files fine with wireless sync turned on. It is remote file access not giving the option to connect to my q10. 'BBID *email* isn't associated with a device running Blackberry 10 OS or an error occurred when trying to retrieve your information from the Blackberry ID servers.'
The problem is that although I have the same blackberry id for link and my q10, no devices show up on the remote file access screen, and I cannot access my files on my computer from my q10, yet I can sync them on my computer over the wifi network. How can I enable Remote File Access?
A problem could be that I have a Curve 9300 on my BB ID account, so if I could disable this (which I have no idea how to do after a lot of research), this might rectify why link cannot set up remote file access.
What I haven't done is wiped my q10 and uninstalled all user data from link at the same time, as then I would have to manually reload everything on my q10.
My q10 shows my computer in the settings\blackberry link\paired devices , but I 'cannot view files on *computer*'. Also, link does not show in the file manager. I set up my q10 as a permanent link not a one-off connection.

No one cares because it's not a z10 (I know because I am having the same problem and no one knows how to fix it and no threads for q10 fix)
Slàinte.
Not all things are good.
Not all things are evil.
But with an open mind...
You can see the difference.
Knowledge is power.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Appending to a file accessed using a URLConnection

Similar Messages

Maybe you are looking for