Applciation Monitor (RZ20) not recording messages

Dear SRM 7 Experts,
We are implementing SRM 7 with ECC EHP 4. We transfer Preqs from ECC to SRM via PI and Central Contracts from SRM to ECC via PI. The problem we have is that the Aplplciation Monitor in SRM 7 (RZ20) is not recording any interface errors when replication of Preqs or Central Contracts fails. What are we missing? Is there a background job that we need to run to make RZ20 record messages?
Thanks and regards
Pedzi

Hi Pedro
Give some examples.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/000c6fb5-59ac-2d10-76a4-ed17eae5366c?quicklink=index&overridelayout=true

Similar Messages

Communication channel monitoring did not record the processing detail

Hi,
I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
Thanks in advanced!
Meiying

Hi
Try opening directly
tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
http://<host>:<port>/mdt/channelmonitorservlet
You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
also refer
No "Adapter monitoring" in runtime workbench

BT Stratus Answer Phone not recording messages

I have had this phone for about a year or so after returning previous ones with different faults. The answer and record facility on this unit will not work. There are no messages to delete so its not full and it is set to answer and record.
The message plays to the caller and says leave a message after the tone and then immediately says thank you for calling and cuts them off. I also cannot record a memo.
Is there a way of resolving this or am I going to return yet another dodgy BT product. Not happy. :-(

Have you tried disconnecting the phone from the line and the power supply for 20 minutes or so and plugging it back in?
Perhaps a simple reset would do the trick.

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

BPM Monitoring: not all messages are groupped my bpm name

Could you explain me why not all messages are groupped my bpm name?
There are messages above bpm name that was sent in this bpm.
It is too diffucult to monitor messages in BPM monitoring.

Hi Denis,
Is the concerned message a synchronous message or a message that relates two integration processes? If yes, this about to be changed and will be corrected in the next SP.
Best regards
Joachim

Infotype 2001 Record 00000000 000000000000000000000000000 does not exist Message no. PG225

Hi,
I am trying to create a record in infotype 2001 but getting error
Record 00000000 000000000000000000000000000 does not exist
Message no. PG225
This error not come before. I have created many records for the last few months.
Please suggest how to resolve.
Regards,
Pathi

Hi Pathi,
I guess this is because of Activity Allocation and Cost Assignment. Plz check the Number range assignment:
PA05 for Number range assignment for additional time data
PT12 for HR document posting
Thanks'
Gautam

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram and still not working. Message on black monitor says"check signal cable...?

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?

Go to System Preferences, Display. Click on dectect displays.

Phone not ringing and going straight to records message saying it's a private number

Phone is not ringing and callers get a message saying it is a private number. This is not the message I have recorded.
I have turned the phone off and sinc it with Itunes What else can I do????

I would suggest you Contact your Carrier...

My iphone is not recording voicemail messages that callers said they left for me-how to fix?

My iphone is not recording voicemail messages that callers said they left for me. The calls are showing up in voicemail list (no notification sound, but the discussion length is zero seconds. How do I fix this?

Most voicemail issues are dealt with by the cellular carrier and that is where the recording resides rather than on the phone. The following has some things you may troubleshoot in addition to contacting your carrier: http://support.apple.com/kb/TS4430

When using pdf reader a message "notes recording" and the time running appears . What is this?

When I use the pdf reader application a message in the upper ribbon says "notes recording" and also time time running. What does it mean?

Let's make sure your Smartphone stays smart and keeps your apps working, Jennifer! Can you tell me exactly what it shown about the bot? Did this start after installing any recent applications or updates? Please try a soft reset by holding the Power and Home keys until device restarts.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

LC10 - Monitoring: I get a message that SQL Access Not Possible

In our SCM 2007 system, when going to transaction LC10 -> Monitoring, I get a message in the top left box that says SQL Access Not Possible. Also, when I go to LCA03, I get a short dump with: Exception condition "LC_CONNECT_FAILED" raised.
This started happening after I changed the password for users: control and lcuser within the livecache database. I updated these passwords withing SCM -> LC10 -> integration and restarted the SCM system, but I still get this failure. I can run commands against the livecache database directly with dbmcli using the same username / password I put into LC10 and I don't get any errors.
This error shows up in the work process trace:
C *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
If anyone has experienced this before, I appreciate any input. Thank you.
~TJ

Hello,
Please update with additional information :
-> Did you follow the SAP note 616555 to change the passwords in the liveCache.
-> Please logon to the liveCache server, run the following commands & update
     with the outputs:
       xinstinfo <SID>
      dbmcli -d <SID> -u control,<new_password>
      <enter>
     dbmcli on <SID>>db_state
     dbmcli on <SID>>sql_execute select * from users
     u2026.
     dbmcli on <SID>>sql_connect lcuser,<new_pwd>
     u2026
     dbmcli on <SID>>sql_release
     u2026
     dbmcli on <SID>>sql_execute user-type=SAP select user from dual
     u2026
     dbmcli on <SID>>exit
-> Run the test connection on your system in /ndb59 for the LCA connection & update the thread with the log.
Thank you and best regards, Natalia Khlopina

Monitor audio input when NOT recording?

I've just bought my first mac along with Logic Studio in preperation for my Sound Technology university course in September. I'm used to using Logic 7 in college, so Logic 8's taking me some time to get used to. Basically, I'm trying to record a guitar part and can't figure out for the life of me how to monitor the audio input in realtime.
"Software Monitoring" is ticked in the core audio settings, and I can hear myself in realtime when I'm recording, but only when I'm recording. Also, the tuner is not picking up my guitar when not recording, however it does when I am recording.
Thanks for your help!

Use the "Monitor Input" Button on your Channel Strip.You might need to select it to show on the strip.It will be an I on the button next to the mute and record

Time in the message monitor is not correct

hi,
the time in the message monitor is not correct. ( -2 hours of the actual time)
So, how can I correct the time in the message monitoring??
Thanks for your help.
Regards
Stefan

Hi michal,
I have found only the user timezone and this zone is correct (Europe/Berlin).
So where can I find the system timezone?
Thanks.
Regards
Stefan

HT4085 I Phone 5 started not recording phone call messages! How do I correct this?

IPhone 5 started to not record phone messages, how to fix

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Applciation Monitor (RZ20) not recording messages

Similar Messages

Maybe you are looking for