Apple 23" Cinema Display HD to iMac G5?

The LCD dispaly on my iMac G5 has failed. I have an opportunity to purchase an older Apple 23" Cinema Dislpay HD. I've been comparing support pages for information but am not sure if this combination will work. The iMac G5 says I can use a VGA display. Is there a connector (adapter) that will work. The iMac has the mini VGA connector.
Thanks for your help!
Randy

I just ordered my new 2009 Mac Pro. I have a small budget for a monitor. <$500. Is buying an Apple Cinema HD Display 23", model M8537ZM/A for $300 a good deal in both cost and ability to use with my new 2009 MP? Or are the newer flat panels all that much better now?
Thanks. Covrc

Similar Messages

  • Apple LED Cinema Display connected to iMac 21.5" 3.33GHz

    I have an Apple LED Cinema Display connected to an older iMac 21.5" (late 2009) and I am using the Cinema Display as the main display. It is very dim though. The iMac's screen is brighter and this computer is actually way older than this LED Cinema Display. This LED Cinema Display should be way brighter, but I cannot adjust the brightness on it. There is no slider when I open display preferences. Anything I can do? Thanks.

    Brightness is controlled via USB.  Is the display's USB cable plugged into the computer?

  • IMac retina 5K, able to run old Apple LED Cinema Display?

    I am considering purchasing a new iMac retina 5K but will I be able to run my old Apple LED Cinema Display with  Mini DisplayPort cable from this? and if so will each monitor retain their native resolution?
    Thanks for your time.

    yes they should I use an asus 27" 3d monitor with my imac 21" even though they use the same res but with air display my ipad 2 acted as 3th display and it don't do 1080p of cause so that had it's own res

  • Mini DisplayPort adapter for 23" Apple HD Cinema Display?

    hello all,
    I'm sure this has been asked and answered here, but I can't find it! (grrr...)
    I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. The WIKI thing about DVI calls it a "DVI M1-DA (Dual link + USB)".
    http://en.wikipedia.org/wiki/DigitalVisualInterface
    For the life of me, I can't find an Apple (or other) adapter with the 10-pin connector to attach to the iMac?
    many thanks,
    b myers

    If it's the old, plastic cased, 23" display, it may use ADC (Apple Display Connector).
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    In that case, you will need a DVI to ADC adapter
    <http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTA4MzU1OTI>
    in addition to a Mini DisplayPort to DVI adapter/

  • Difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)?

    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different. Its so confusing! I want to purchase a secondary display for my 21" iMac, but idk the difference between the two.
    furthermore, another question i have is, is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    please help, thanks!

    rae90 wrote:
    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different.
    One has thunderbolt capabilities, the other doesn't.
    is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    No you can get a larger one.  Maybe not an Apple one, but certainly another brand.

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

    My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
    I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
    Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

    To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
    The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • How do I connect  Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

  • Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

    I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • VMware Fusion and Apple LED Cinema Display

    I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
    I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
    1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
    2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
    3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
    4) The resolution ia 1277 x 1234. That is weird.
    5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
    Something is wrong, Any help in fixing this would be greatly appreciated.
    Bryan

    you have to separate out what is Fusion and what is Windows native.
    Even doing updates to Windows sometimes should not or cannot be done properly in VM.
    And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
    Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
    You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

  • Older Apple HD Cinema Display is detected but no picture

    Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
    Yet.
    So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
    Everything was working fine and I was video editing and Photopshopping to my hearts content.
    I had noticed that recently the display would not come back from sleep without rebooting the computer.
    So that might have been an early clue.
    Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
    I rebooted the computer. This time the monitor displayed black and white vertical lines.
    "Oh joy," thought I.
    I rebooted again.
    This time nothing but the heart of darkness.
    Nothing.
    I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
    I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
    The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
    I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
    I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
    So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
    Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
    Many thanks.
    And good karma to all who give it a head scratch.
    A

    Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
    Good to know I'm not the only one, thanks for posting.

  • VGA Windows laptop to Apple LED Cinema Display...?

    Attaching VGA Windows laptop to Apple LED Cinema Display...? Is this possible? I have a personal MBP that'd work fine, but need to connect a work laptop as well. Any insight would be great. Thanks!

    As mentioned, the biggest issue is that the VGA signal is analog, and the Apple Cinema Displays only accept digital signals. Does your laptop have any other videop output ports? A DisplayPort or Mini DisplayPort would be the easiest, of course, but if you have an HDMI connection, you could get something like the Atlona HDMI to Mini DisplayPort Converter and Scaler. Not exactly cheap at $170, but if you really need it, and you have the port, maybe it is a solution for you. The only issue, it seems, is you would be limited to 1920x1080 resolution.

  • What connector is on the Apple 20" Cinema Display, DVI-I or DVI-D?

    Sorry if this is a noob question, i just have never bothered to clarify this fact before. I have an Apple 20in Cinema display. Is the DVI connector on it a DVI-I or DVI-D type. I'm not sure what the difference is but there is obviously one so i figured i'd ask.
    Thanks in advance!

    Hi 30inch-
    Welcome to Discussions!
    To extend the cable on the ACD, a cable such as that which Gefen offers will serve the purpose. At issue with the 30", is the dual link requirement. As well, with all ACD's, the USB connection is important. The firewire is for convenience, more than anything, but is included in the cable set from Gefen.
    The booster that is included, is important to keep signal strength, and maintain picture clarity over the distance of the cable.
    With distances of less than 10', one might get by with a quality dual link DVI-D (or DVI-I) connected cable, though the issue of signal strength may be a performance limiting factor. The picture quality and monitor performance from a passive (non-boosted) cable, will be determined by the strength, or weakness of the graphics card.

  • Need apple 23in cinema display 90w power adapter replaced

    need apple 23in cinema display 90w power adapter replaced

    I phoned Apple Care (without having a plan) and they sent me one for £47 then charged a further £8 for not sending the broken one back, lol.

Maybe you are looking for

  • Can we view the long Description in T C- CRM_DNO_MONITOR

    Hi guru,   Can any SAP Guru's help me to solve the given Below issue 1.  Is it possible to view the Whole  relpy text in the transaction CRM_DNO_MONITOR. 2. I can we the support BP No but is it possible to view the Support team  name along with the s

  • Wifi connnection annoyance on N95

    Hello again, Another problem I have with my N95 since the firmware upgrade about a month ago is that everytime I connect to my home wifi I am asked for the WEP key - does the phone not store this info? It used to remember the key (before the firmware

  • How can I whitelist specific URLs to disable mixed content blocking? (New Feature in FF23)

    For a few of the enterprise products I use, the mixed content blocker disables my ability to use these tools. While I understand I can toggle to allow mixed-content -- I would like to be able to whitelist the URLs that I use regularly that I don't wa

  • Windows does not seem to recognize my iphone as a storage device.

    How can I make this happen so that I can save my photos to the computer? I've been able to do it in the past so I'm not sure what has changed.

  • BAPI for Quotations

    Hi, is there any BAPI to list the customer quotations ? I'm looking for any "quotations-equivalent" to salesorder-BAPI : BAPI_SALESORDER_GETLIST. Thanks Martin Omamik