Apple 23" Cinema Display - lines around windows

I have the Apple 23" cinema display and now I'm seeing "ghost lines" around open windows on the desktop, and also along the sides of application windows, like Safari. What is causing this?

having the same problem, you can see right through to other open windows ie. photoshop/acrobat documents. not very good when retouching images etc.

Similar Messages

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

VGA Windows laptop to Apple LED Cinema Display...?

Attaching VGA Windows laptop to Apple LED Cinema Display...? Is this possible? I have a personal MBP that'd work fine, but need to connect a work laptop as well. Any insight would be great. Thanks!

As mentioned, the biggest issue is that the VGA signal is analog, and the Apple Cinema Displays only accept digital signals. Does your laptop have any other videop output ports? A DisplayPort or Mini DisplayPort would be the easiest, of course, but if you have an HDMI connection, you could get something like the Atlona HDMI to Mini DisplayPort Converter and Scaler. Not exactly cheap at $170, but if you really need it, and you have the port, maybe it is a solution for you. The only issue, it seems, is you would be limited to 1920x1080 resolution.

Apple 23" Cinema Display not supported by Windows Media Center Edition PC

Well I'm learning the hard way and of course that is through experience. I just found out after purchasing my 23"Apple Display and talking to the Apple Support Tech is that Apple does not support the Cinema Display with PC's,
Wish Apple would be more transparent on this issue prior to a costly purchase. For example on the Apple site listing the Display in system requirements:
Windows PC and graphics card that supports DVI ports with full single-link digital bandwidth and VESA DDC standard for plug and play setup
Well I have a Windows PC with a Nvidia Graphics card just as the system requirements state. Yet my PC will not adjust to proper resolution for the Apple Display. The graphics card works fine. Its a driver issue where the Apple Display is not compatible with Window Media Center Edition on Windows PC's
So in conclusion the system requirements for Windows PC's that Apple is stating For Apple Cinema Displays is not correct. The system requirements need also to state that the Apple Cinema Display does not work with Windows Media Center Edition (MCE)
Hope that helps for any users with Windows Media Center Edition thinking or already have purchased an Apple Cinema Display.
73,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Well,
Here is the latest from Nvidia Customer Care educating users on the DVI port on the Nvidia GeForce FX 5200:
"...The basic difference you will see in these ports are in their Physical appearance. The DVI-D has less pins compared to the DVI-I port connector. Also the Apple 23" Cinema Display will work at a resolution of 1920*1200. But this graphics card that is Geforce FX 5200 will not support this resolution of 1920*1200. It will support only till 1600*1200. So that's the reason you were having the issues were you were not able to adjust the resolution"
So I ask, which Nvidia GPU card can I substitute for the current one at a reasonable price? I don't need dual link, so single link would be sufficient for my application . Here is some more helpful tips from Nvidia support. Hope this helps other users, utilizing the Apple 23" Cinema Display"
"...go for a Geforce 7600 GS graphics card which is a AGP 8x compatible graphics card. This graphics card is just 129$ graphics card. Please visit the given link to know about the details of this graphics card."
http://bfgtech.com/7600GS_512.html
And now for the final conclusion of what you need to know regarding DVI ports. Evidently Nvidia uses a term called normal DVI port. I've never heard of that term in the literature in shopping for a graphics card and checking the specs. I guess you need to look for the specific term single or dual link specifically. If it doesn't say that, then what I can gather it is a normal DVI port...whatever the heck that is?
"...Yes let me inform you that the Geforce FX 5200 graphics card does have one DVI port and one VGA port. But these single link and Dual link DVI port is totally different compared to the normal DVI ports. As you wanted to connect an Apple 23" Cinema Display to this graphics card. So for this you will need to have a graphics card which will have a Single link or Dual link DVI ports not the normal ports. So to support an Apple 23" Cinema Display, you will need to have either a Geforce 6 series or the Geforce 7 series graphics card. That's the reason I gave you the list of graphics card which comes with Single or Dual link DVI ports, not the normal ports."
Oh well off to the market to pick up either a Series 6 or Series 7 Nvidia Graphics card. The Nvidia Customer Care team was very helpful and replied to my inquires very quickly through email.
Hope this long drawn out expose helps others who might have issue with connecting their proud Apple 23' Cinema Display to their PC
Kind Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Annoying Screen saver/Login window/Apple LED Cinema Display Bug

Hi all,
After upgrading to 10.6.4 I have a really annoying problem.
First the relevant setup information: MacBook Pro 17 inch (2009 model), 8 GB RAM, 10.6.4, Screen saver activates after a few minutes with password protection and a few minutes thereafter the screen is put to sleep.
Here is what happens: whenever I have an external Apple LED Cinema Display connected and I move the mouse while the screensaver is activated, I am able to type my login and password, but after that in just a matter of seconds (usually 3-4 seconds) the both screens become blue and all my programs close and Mac OS X jumps to the login screen (all data that was not saved is gone, all open windows also gone). This bug does NOT happen if the Apple LED Cinema Display is not connected.
Anyone else experiencing this issue?
Best Regards,
Michael

Hello guys, thank you for answering.
Yes, the USB cable is plugged.
At the moment I'm avoiding to flash the VRAM. But I found out that restarting my system gives me access to the controls again. It does randomly stop working. Sometimes I can adjust the cinema display settings but not the macbook screen settings. In my opinion it is definitely a bug.
There is any way to submit a bug somewhere?

Older Apple HD Cinema Display is detected but no picture

Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
Yet.
So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
Everything was working fine and I was video editing and Photopshopping to my hearts content.
I had noticed that recently the display would not come back from sleep without rebooting the computer.
So that might have been an early clue.
Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
I rebooted the computer. This time the monitor displayed black and white vertical lines.
"Oh joy," thought I.
I rebooted again.
This time nothing but the heart of darkness.
Nothing.
I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
Many thanks.
And good karma to all who give it a head scratch.
A

Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
Good to know I'm not the only one, thanks for posting.

Does the cinema display work with windows

Hi last year i got a new acer laptop and found the screen was much to small for all the windows i work with so i connected it to an external screen that i had just a week ago it stopped working and i was wondering if the cinema display would work with my laptop

Here's some interesting links that might help:
Boot Camp Software Update 3.2 for Windows 64 bit
Apple Cinema Display 27”on Windows
LED Cinema 27" with Windows 7 (Apple discussions thread)

VMware Fusion and Apple LED Cinema Display

I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
4) The resolution ia 1277 x 1234. That is weird.
5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
Something is wrong, Any help in fixing this would be greatly appreciated.
Bryan

you have to separate out what is Fusion and what is Windows native.
Even doing updates to Windows sometimes should not or cannot be done properly in VM.
And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
PS - I keep my MacBook Pro lid closed when using the display.

Is your 2.6 the CTO upgrade from the high end 2.3 15"?
Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

NVIDIA GeForce FX 5200 with Apple 23" Cinema Display?

Hi,
I would like to know if my graphic card in my Sony Vaio PC is compatible with a 23" Apple display ? I would like to run a splitter with one feed going to my Mac Pro and the other to my PC utilizing the same Apple LCD monitor.
I have a NVIDIA GeForce FX 5200 with 128Mb, this card has a PCI connection,but I am not sure if my card could support the Apple 23" Cinema Display that I recently purchased to replace the 19" Envison LCD that I'm currently using ?
Does anyone have an idea ?
Is there a list somewhere giving compatble graphic card ?
The nvidia site does not say a word about cinema display !
Thanks in advance
Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Apple doesn't make compatibility information known
for non-Apple systems.
But yes, they do.
Here is the list of tested video cards for the ACDs:
http://docs.info.apple.com/article.html?artnum=301066
I highly recommend the Quadro cards; they are fantastic.
nansaidh
Dell Windows XP Pro 23" Cinema Display

8800 GT vs. new Apple LED Cinema Display (27" flat panel)

I would like to buy the new Apple LED Cinema Display (27" flat panel), however, have no idea if it is compatible with my Mac Pro. Bellows are the details of my desktop...
Mac Pro (MacPro3.1) Quad-Core Intel Xeon 2.8 GHz * 2 (8 cores), with 12 GB DDRII 800 MHz.
Graphics cards for Mac Pro (Early 2008): NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
If it's not compatible, could someone let me know how to upgrade of what to make it work?
Thanks!
PJ

Doesn't look hopeful.
Apple LED Cinema Display 27"
http://store.apple.com/us/product/MB571Z/A
Obviously the ATI 5770, once it ships, will work.
Apple Display tech note only addresses ATI 5xxx and only 2009-2010 Mac Pro models.
http://support.apple.com/kb/HT4279
Cutting off anything two years old, is now 'legacy'? I don't think they hope to sell their 27" to older Macs or PCs.
In the product Q&A:
*This looks great! Does this work with PCs?*
Yes, but you'll need an adapter with a mini-displayport like the top of the line Radeon 5970 (they all have one MDP), or one of the 5870s specifically designed for Eyefinity (multiple displays). Search Newegg under graphics cards (advanced) and filter only cards with mini displayport. No other PC cards on the market, including Nvidia seem to have mini-displayport. It's a good interface, but I fail to see why Apple decided to loose customers to support it exclusively.
+ADC is dead! long live proprietary technology!+

How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks.

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

Apple 23" Cinema Display - lines around windows

Similar Messages

Maybe you are looking for