Apple 23" Cinema Display USB hub fixable?

My Keyboard was plugged into my cinema display, and my mouse into the keyboard. The mouse would occassionally drop out, and I would have to unplug/replug it in. (FTW, I do have two cinema displays connected to my mac, but as they both have bricks I don't see power being the issue)
Lately, the mouse has been going dead immediately after boot. No laser light or nothing.
Lately it has been extra slow and intermittent. I finally abandoned connecting the cinema display's usb and firewire connections to my mac (pro) completely. It has been working awesome so far.
Has anyone had this issue and been able to get their USB ports fixed on their cinema displays by Apple? It seems to me to be a defect.

I would power down everything, disconnect the monitor from the computer, and the power from the computer and the monitor, wait 15 minutes, and reconnect the power. *Double check* your monitor connections, make sure the USB is properly inserted to the compters USB port. Might try a different port. If the USB ports of the computer work with known working devices (like a keyboard) and the problems continue, it looks like the monitor ports have a hardware problem.

Similar Messages

Apple LED Cinema Display -- USB Port + iSight Camera not working

I see an unusual problem with my brand new LED Cinema display. When i put my Macbook pro in sleep mode it deactivate all the USB ports and isight camera in LED Cinema Display. When I turn the computer back on I cannot use USB or iSight camera. I tried below solutions -
- Restarting the Macbook pro and LED cinema
- Completely draining the power in both LED Cinema and Mackbook pro.
- Resetting Macbook pro.
- Upgrading LED Cinema to latest and greatest firmware ( firmware update 1.0)
Did anyone encounter this problem ? If yes please post your thoughts or any solutions.

After numerous attempts of powering down/resetting the macbook pro and led cinema i was able to make the USB ports work. However I was able to successfully reproduce the problem once again by putting the mackbook on sleep mode.
I finally ended up shipping my led cinema back to apple for a replacement. I will try the test case with the new one when it arrives.

Mini DisplayPort adapter for 23" Apple HD Cinema Display?

hello all,
I'm sure this has been asked and answered here, but I can't find it! (grrr...)
I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. The WIKI thing about DVI calls it a "DVI M1-DA (Dual link + USB)".
http://en.wikipedia.org/wiki/DigitalVisualInterface
For the life of me, I can't find an Apple (or other) adapter with the 10-pin connector to attach to the iMac?
many thanks,
b myers

If it's the old, plastic cased, 23" display, it may use ADC (Apple Display Connector).
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
In that case, you will need a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTA4MzU1OTI>
in addition to a Mini DisplayPort to DVI adapter/

What connector is on the Apple 20" Cinema Display, DVI-I or DVI-D?

Sorry if this is a noob question, i just have never bothered to clarify this fact before. I have an Apple 20in Cinema display. Is the DVI connector on it a DVI-I or DVI-D type. I'm not sure what the difference is but there is obviously one so i figured i'd ask.
Thanks in advance!

Hi 30inch-
Welcome to Discussions!
To extend the cable on the ACD, a cable such as that which Gefen offers will serve the purpose. At issue with the 30", is the dual link requirement. As well, with all ACD's, the USB connection is important. The firewire is for convenience, more than anything, but is included in the cable set from Gefen.
The booster that is included, is important to keep signal strength, and maintain picture clarity over the distance of the cable.
With distances of less than 10', one might get by with a quality dual link DVI-D (or DVI-I) connected cable, though the issue of signal strength may be a performance limiting factor. The picture quality and monitor performance from a passive (non-boosted) cable, will be determined by the strength, or weakness of the graphics card.

New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
PS - I keep my MacBook Pro lid closed when using the display.

Is your 2.6 the CTO upgrade from the high end 2.3 15"?
Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

Annoying Screen saver/Login window/Apple LED Cinema Display Bug

Hi all,
After upgrading to 10.6.4 I have a really annoying problem.
First the relevant setup information: MacBook Pro 17 inch (2009 model), 8 GB RAM, 10.6.4, Screen saver activates after a few minutes with password protection and a few minutes thereafter the screen is put to sleep.
Here is what happens: whenever I have an external Apple LED Cinema Display connected and I move the mouse while the screensaver is activated, I am able to type my login and password, but after that in just a matter of seconds (usually 3-4 seconds) the both screens become blue and all my programs close and Mac OS X jumps to the login screen (all data that was not saved is gone, all open windows also gone). This bug does NOT happen if the Apple LED Cinema Display is not connected.
Anyone else experiencing this issue?
Best Regards,
Michael

Hello guys, thank you for answering.
Yes, the USB cable is plugged.
At the moment I'm avoiding to flash the VRAM. But I found out that restarting my system gives me access to the controls again. It does randomly stop working. Sometimes I can adjust the cinema display settings but not the macbook screen settings. In my opinion it is definitely a bug.
There is any way to submit a bug somewhere?

Apple LED Cinema Display connected to iMac 21.5" 3.33GHz

I have an Apple LED Cinema Display connected to an older iMac 21.5" (late 2009) and I am using the Cinema Display as the main display. It is very dim though. The iMac's screen is brighter and this computer is actually way older than this LED Cinema Display. This LED Cinema Display should be way brighter, but I cannot adjust the brightness on it. There is no slider when I open display preferences. Anything I can do? Thanks.

Brightness is controlled via USB. Is the display's USB cable plugged into the computer?

Is Apple 27in Cinema display compatible with NVIDIA Quadro FX 4800 for Mac?

Can anyone tell me whether the new Apple 27inch Cinema display will work with the NVIDIA Quadro FX 4800 for Mac? I will use this on a MacPro with 2.66GHz 6-Core Intel Xeon “Westmere” and CS5 (Adobe recommends the NVIDIA). It seems incredible that it doesn't for whatever reason.
Thanks
James

You will need a dual-link DVI to Mini DisplayPort converter.
<http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Po wered.html>

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks.

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......

VMware Fusion and Apple LED Cinema Display

I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
4) The resolution ia 1277 x 1234. That is weird.
5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
Something is wrong, Any help in fixing this would be greatly appreciated.
Bryan

you have to separate out what is Fusion and what is Windows native.
Even doing updates to Windows sometimes should not or cannot be done properly in VM.
And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

Older Apple HD Cinema Display is detected but no picture

Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
Yet.
So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
Everything was working fine and I was video editing and Photopshopping to my hearts content.
I had noticed that recently the display would not come back from sleep without rebooting the computer.
So that might have been an early clue.
Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
I rebooted the computer. This time the monitor displayed black and white vertical lines.
"Oh joy," thought I.
I rebooted again.
This time nothing but the heart of darkness.
Nothing.
I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
Many thanks.
And good karma to all who give it a head scratch.
A

Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
Good to know I'm not the only one, thanks for posting.

Apple 23" Cinema Display USB hub fixable?

Similar Messages

Maybe you are looking for