Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

Similar Messages

  • Apple tv not working with panosonic TH-50PX75U old.

    Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • My factory unlocked iphone 4s mms is not working with tmobile, please help...

    my factory unlocked iphone 4s mms is not working with tmobile, please help...

    Check out this link. It should fix the problem
    http://support.t-mobile.com/thread/17918?tstart=0

  • Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

    Since updated softwear on iPad to 7.0 Apple TV not working?

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • Apple tv not working with emerson tv. Why?

    i just got a new apple tv. I have a emerson tv and it does not work with my tv. i have tried all options and trouble shooting. It just doesnt work. Does apple tv just not work with emerson tv?

    appletv works on all tv's which support hdmi 1.3 with hdcp

  • Apple TV not working with new 23" cinema display

    OK so I finally found a functional use for my new Apple TV, which has been sitting unused in my living room. My MacBook Pro already connects to the HD projector in there, so Mac TV is just less functionality and redundant.
    I decided the only use I have for a keyboardless Mac interface for just music, podcasts, photos, and videos is the bathtub.
    Being the Mac fanboy that I am, I wanted the solution to be all Apple.
    So I headed down to my local Apple Store with the intention of buying a new 23" Cinema Display for my Apple TV and an iPod HiFi for the sound. I was dismayed to see them showing off the Apple TV on Sony LCD TVs. Why wouldn't Apple want to sell people a triple-play package and have it set up as a demo? After all, they weren't selling the Sony TVs anyway.
    But my first sign of trouble was the very nice store employee who didn't know if the Apple TV would work on a cinema display. But he definitely wanted to find out when I got home. Searching here, I found posts that seem to confirm that it would work, but the actual source is related to an older ADC cinema display, not the new ones.
    I set everything up and used a Toslink-minijack adapter to run the optical digital audio from the Apple TV to the iPod Hifi. I used an HDMI-DVI-D adapter to connect the cinema display to the Apple TV. I powered it all up.
    I got the white Apple logo on the screen, then everything went black. I used the Menu and + keys on the remote for 6 seconds to cycle through the resolutions. Still all black. I used the Menu and - keys on the remote to reset to factory settings. Again booted into blackness.
    Interestingly, while using the + and - keys on the Apple TV remote, the iPod HiFi volume was lowered and raised simultaneously with the moving of the menu selections in Apple TV (I could hear the clicks). What this means is, 2 remotes, each paired to each device, will be needed for proper operation. This is why having too simple a remote is lame.
    At this point I am dead in the bathtub water. I drop more money on Apple than it costs to get a new iMac (which is plan B) just so I can give the Apple TV a shot in my bathroom. But it all doesn't fit seemlessly together on first try.
    Any suggestions? Could the HDMI-DVI-D adapter be blocking the HDCP signal needed to display an image? Is DVI-D the wrong adapter to use? Any help is appreciated.

    I've not been convinced a monitor will work with the tv, but I have to accept the word of those that have had success. I'm not so certain that a monitor is a suitable first choice, maybe if you have one lying around OK, but to buy one instead of a tv is not only a very expensive alternative but even if it works you will have no way of controlling the brightness etc.
    Any suggestions? Could the HDMI-DVI-D adapter be blocking the HDCP signal needed to display an image? Is DVI-D the wrong adapter to use?
    Possibly, Did you ever manage to repeat getting the apple logo or indeed anything even if only for a few seconds. DVI-D or DVI-I would be the right connector, don't use a DVI-A

  • Apple Mail not working with IMAP account

    I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
    I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

    I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
    I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
    I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
    I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
    Can anyone help with these IMAP access problems?

  • Apple ID not working with facetime and messages what to do

    I'm not sure when this issue occurred but I cannt use my facetime and messages at all. My apple ID works with everything else but facetime, messages and oh yeah icloud . I have changed my ID like three times and I also looked at my DSM but nothing. I'm frustrated because I live in Trinidad where there is no apple store to correct this issue. Please help someone!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Apple TV not Working with Yosemite

    Hi , i have update my iMac 21.5 Late 2012 with Yosemite and Airplay not see my Apple Tv 2 update with new version of firmware 6.2.1
    Before with Maverick the airplay and displat mirroring work great.
    After the update the apple tv not appear in the device avalaible.
    Help please
    Thanks

    i have found the problem ... is the firewall
    after the update in the option the process "discoveryd" is disable and this make not visible the apple tv 2 with yosemite

  • Apple tv not working with my tv

    I have 3 TVs at home,and apple tv is only working with one tv,I have tried everything with the other 2 TVs but it's not working

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports 720p
    Make sure your TV supports HDCP

  • Non Apple Apps not working with Not.Centre

    I've restored my iphone 4 twice now, each time I've started a new phone and gone through the set up on the phone. I've tested my mail app, messages app and reminders app and they work faultless with Not.Centre but when I downloaded Twitter Inc. from the app store and got an @ reply, I didn't get a notification. I've gone through all the settings, in both the Settings App and even within Twitter itself and have TURNED ON all notifications but still nothing.
    I'm not going to restore again, it's just a waste of time. Does anybody have a fix for this?
    Cheers.

    Hi Groovy32,
    So after the iOS update all Apple apps work fine but no non-Apple apps work?  I just updated my iPhone 6 Plus last night and haven't seen an issue so let's go further with troubleshooting as in
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    For example, check for App updates, try installing another app or deleting and reinstalling one that's not working.
    Regards,
    Nubz

  • Apple tv not working with itunes match

    I bought Apple Tv last week and also bought the Itunes match , but whenever i open music on my apple tv , it says
    "Itunes Match "
    " Setting up your apple tv to stream music from itunes match . This may take a few minutes,depending on the size of your library and internet connection speed "
    i have already turned on itunes match on my Apple Tv and computer . Still its not working .

    I had a similar issue.  As of September 29, 2014.  After setting up iTunes Match on my Mac through iTunes, iTunes Match was not working on Apple TV.  The weird thing was that it worked on my iPhone 5 and Late 2013 iMac.  Strangely Apple TV was the newest device.  I and the newest OSs available for all my devices (iMac, iPhone and Apple TV - either OS X 10.9.5 and/or iOS 8.0.2).
    I called Apple Support and spoke with someone who had me log out of and back into my Apple account through Apple TV.  I was then prompted to activate iTunes Match on Apple TV (3rd Generation).
    That fixed the problem for me.
    Be advised that you need to remember your Apple TV password in order to sign back in.  Apple TV does not cache Apple ID passwords.
    I suggested to the Rep that they need to make the process much simpler via a way to Refresh iTunes or, at least, add Keychain to Apple TV so that I did not have to go through this again.  I suggest other users make the same requests through Apple Feedback for Apple TV.

  • APPLE CHARGER NOT WORKING WITH IOS5

    Hello,
          Upgraded ipad 1 to ios5.  Apple charger, A1357, no longer works. 
         I get this message:    "not charging"  in upper right corner.
         When I use my tripp lite  power strip with usb port, I get :  Charging is not supported with this acessory.
         It will be hard to use this ipad if I cannot hook it up to power.
         18% power remaining.

    I  should add that the tripp lite charger was working before as well.

  • Apple WiFi not working with pc

    My airport extreme 802.11n wifi works fine with my apple products but I also need to use with my pc and that is not working.  Any ideas?

    First, does your PC have any issues connecting to other Wi-Fi networks or just the one being provided by the AirPort Extreme?
    If just the Extreme, what is its current wireless encryption set for? WEP, WPA, or WPA2. Can the PC's wireless and operating system support all of these?

  • Will Apple Cinema Displays work with Directv?

    Hi everyone, I have a 23" Cinema Display, the model before the aluminum casing. Now what I'm trying to do is watch Directv on the ACD through the hdmi/dvi output of the directv receiver. I understand I will need an ADC to DVI adapter for my model display but I'm already planning on getting one since I will be connecting my macbook pro to the display.
    So has anyone tried this out and can say this will work fine? Or will the picture be distorted, colors off, incorrect signal, etc? If it works fine, I will buy a dvi switch so that I can use the display for my computer and television.
    I know there is Elgato's EyeTv hybrid out there but this option will only allow me to watch OTA HD and every directv channel in sd. I already have the directv hd package in my house but do not have a tv in my room at the moment.
    Thanks a lot.

    As far as I know this won't work for at least one reason and possibly two. For one, Apple Cinema displays are very picky about the input that is passed to them. In fact, the 23" ACD will run from one, and only one, format, which is 1920 x 1200 at 60Hz. This is not a standard for consumer devices like satelite TV boxes, so the DirectTV will not be able to output this resolution.
    The second reason is that the HDMI output from the DirectTV will likely expect an HDCP handshake from whatever display is attached. ACDs are unable to provide this.
    There may be products from Gefen that will allow you to interface the two, but I'm not sure about that.

Maybe you are looking for