Apple A/V cable not long enough

it seems to me I can't connect the two audio jacks to my Stereo when I have the yellow Video one in the TV - - NOT LONG ENOUGH! (the 3-cable part) - i would'nt mind but my stereo is directly under my TV
the video cable needs to be longer I think - - or the two audio ones - or maybe all 3 then.....also, when those two audio L/R are to stereo, there is no more to feed to TV, so sound from the stereo only, none from TV
- so what to do about this? - if anyone knows about splitters or cable extensions, show me jah light

You can go to Radio Shack, Best Buy, etc. and get a generic camcorder A/V-to-RCA cable. The cable will have the longer head phone jack like the Apple A/V cable but may come in longer lengths. One note though, the normal color outputs using the camcorder cable are not correct when using it with an iPod.
Plug the red RCA plug into your TV's yellow RCA jack.
Plug the yellow RCA plug into your TV's white RCA jack.
Plug the white RCA plug into your TV's red RCA jack.
See for details:
http://www.macdevcenter.com/pub/a/mac/2005/11/18/video-ipod.html
<Added> - After I posted a reply I noticed you're in Dublin, so the stores I listed may not make sense. Go to any electronics store and ask for the camcorder cable I mentioned. If they don't have a cable long enough for you, ask for a RCA jack extension cable. That will work too.

Similar Messages

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
Thanks

The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

I got it out!
Here is how.
None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
So, I thought "Weird..."
I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
I tried a few other disks.
The drive seems to work fine.
Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
Who knows ?
I am still backing up my hard drive as I type this message in case I need to take it to the store.

My serial number is not long enough?

Hi, I recently bought Photoshop elements 12 and am trying to install it on to my Mac Book Pro.
I bought the photoshop from a store, so I am trying to enter the serial number on the box when installing. The serial number given is 18 characters long, this is not long enough to fit the required serial number. The other numbers on the back are also not long enough.
Please can someone help??

Hello Lara,
you purchased your product from these firms like Amazon. You didn't get a serial number, only a code with which you can request a serial number from Adobe. Please have a look at - 99jon said it above - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

Err: workarea is not long enough...

Hi all,
Please solve this problem.......
Used this Statement in FM....
INSERT zdsd_hh_rahd FROM TABLE lt_rahd_delete.
Where 'zdsd_hh_rahd' is a Transp. Table with 25 fields.
'lt_rahd_delete' is declared as:
DATA: lt_rahd_delete TYPE /dsd/hh_rahd_s_tt.
'/dsd/hh_rahd_s_tt' is a Table Type.
Has Line Type as: '/DSD/HH_RAHD_S',
Key Defination as: Key component.
'/DSD/HH_RAHD_S' is a Structure refering to Table '/DSD/HH_RAHD'.
'/DSD/HH_RAHD' and 'zdsd_hh_rahd' hase the same fields.
But i am with an Error saying that:
Workarea 'lt_rahd_delete' is not long enough...
Edited by: CHELIKANI KUMAR on Dec 20, 2007 5:50 PM

Use INSERT zdsd_hh_rahd FROM TABLE lt_rahd_delete ACCEPTING DUPLICATE KEYS.
Work area wa should always be declared in the ABAP Dictionary with respect to the database table or the view so Declare
Data:lt_rahd_delete type zdsd_hh_rahd occurs 0.
Pls Let me know the Status.
Kanagaraja L
Edited by: Kanagaraja Lokanathan on Dec 20, 2007 1:07 PM

Internal table - work area not long enough

Subject changed by moderator. Please try to use a more meaningful subject in future
The work area "ITAB" is not long enough. how to solve this problem.
Edited by: Matt on Nov 14, 2008 10:20 AM

please check the order of the fields you are passing to your internal table.
Their can be many possible cases .
a)
internal table has less number of fields and u are passing more fields.
b)
suppose Itab has field Vbeln and it`s length is 10 and u are passing filed having length
12.
Please check that.
Regards
Neha

Serial Number in System Info is Not Long Enough

I have deactivated CS5 from Computer A, noting the System Info before deactivating, which included a Serial Number.
When trying to re-install CS5 on Computer B, the Serial Number is not long enough.
This CS5 is a student edition.

did you get the serial number from Help>System Info, where it says "Serial Number"? because, if so, that's not the serial number. In fact, it's not even close. my actual serial number started with 1 while the "serial number" in the System Info started with 9.
when you deactivated from the old computer, did you check the box to erase the serial number from the computer upon activation? If not (i.e., the serial number is supposedly still on the old computer), i've heard that if you start a reinstall of CS5 on the old computer, it will fill in the serial number at that screen. I don't know this for sure because the OS on my old computer literally crashed in an irreparable way immediately after I deactivated CS5.
If it isn't a student edition (you must not have the box - the box would clearly say so), then the only way to get the serial number is to know the email address that it may have originally been installed under. Even that may not work, when I spoke to Adobe support (after waiting 3 hours on my digital phone), I gave then every email address that I could imagine having used and did not find the record of my initial installation.
Again, good luck

Java.sql.SQLException: Byte array not long enough

using thin jdbc returned this exception seems to be connected to the length of the statment:
////////create a prepared statement////////
preUpdateStatement = dbConnection.prepareStatement(updateStatement.toString());
// build data output stream on byte array output stream
ByteArrayOutputStream byte_os = new ByteArrayOutputStream();
DataOutputStream data_os = new DataOutputStream(byte_os);
// write chars to data output stream
data_os.writeChars(((Element)m_values_vector.elementAt(i)).m_value);
// create input stream and pass it to prepared statement
ByteArrayInputStream byte_is = new ByteArrayInputStream(byte_os.toByteArray());
preStatement.setUnicodeStream(i+1, byte_is, byte_os.toByteArray().length);
// execute
preUpdateStatement.executeUpdate();
preUpdateStatement.close();
null

stack is:
java.sql.SQLException: Io exception: Char array not long enough: javaCharsToUtf8Bytes
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(Compiled Code)
at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
at oracle.jdbc.dbaccess.DBError.throwSqlException(Compiled Code)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecute(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(Compiled Code)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(Compiled Code)

Work area "itab" is not long enough

Hi All,
Here am facing a trouble with internal tables.
I need an internal table for processing. I declared a table type refering to an structure. The program is throwing me an error "Work area "itab" is not long enough. "
Can anyone telme what's wrong with the code?
Thanks,
Anjum.

Hi Nasarat,
if you look at carefully you definitions of tables
TYPES: BEGIN OF tbl,
rc_n TYPE c,
rec_n(2) TYPE n,
END OF tbl.
DATA: itab_org type tbl1 occurs 0 with header line,
itab_rc type tbl1.
your DATA statement referes ITAB_ORG to a Type tbl1 which does not exist in your TYPES statement.
your DATA statement refers to ITAB_ORG is not a internal table but a WORK Area as you have declared it as ITAB_ORG type tbl1.
If you want to declare and internal table ITAB_ORG - decalre it as
Data:ITAB_Org type standard table of tbl.
and define a explicit work area
DATA: wa_org type tbl.
Never use Occurs 0 and Header line as it coccupies lots of memories and your programs may dump in future . So please avoid occurs 0 and header line and instead decalre an explicit WORK AREA.
Similary declaration for internal table ITAB_RC it should be
DATA: ITAB_RC type standard table of tbl,
WA_RC type tbl.
then after these declarations when you do a SELECT statement it should be
SELECT rc_n rec_n into ITAB_ORG from<DB table>.
The fields as declared in types should be called in the same sequence as you have defined above OR use INTO CORRESPONDING-FIELDS OF ITAB_ORG.
Hope this reolves your query and was useful.
if yes please do reward suitably
Thanks
Venugopal

ERROR: work area not long enough

Hello experts,
I have a submit event in which I was declaring one work area named "ls_data".
I have a DDIC structure ZNEWEMP999_S.
I wrote,
DATA ls_data type ZNEWEMP999_S.
It's giving an error "The work area "LS_DATA" is not long enough.long enough".
Can any one suggest me how to resolve it.
Regards,
JAVED.

Try this....
SELECT *
 INTO CORRESPONDING FIELDS OF
 TABLE itaBTWO
 FROM ZDOLTARC03
 WHERE SEARCHFLD EQ WAONE-SEARCHFLD
 ORDER BY SEARCHFLD.
Regards,
Rich Heilman

The import parameter of a RFC FM is not long enough

Hii
I have a standard FM and one of the import parameter field is not long enough for.
Instead of copying the RFC FM please advise how can i change the FIELD TYPE?
What is the most appropriate solution

If it is a standard FM, it will have it's import parameters type with reference to Data Dictionary. So, if this parameter is not long enough for YOU (or better said, for the value you want to assign to it), there is nothing you can do about it.
For example when creating a business partner, with a Last name of more than 40 characters, you will not be able to store this name in SAP anyway, since in SAP the last name is typed as CHAR40.

The work area "IT_ITAB" is not long enough

I created a interna table IT_ITAB with OCCURS 0, But it's giving error as
The work area "IT_ITAB" is not long enough.
So pls send the correct syntax to solve the error....

data : it_data like standard table of mara occurs 0 with header line.
Above syntax is not working...its giving error as "OCCURS 0 is not expected".
I have one more dought...In the report I am providing some of the fields from my own database table.
1. Can I provide the fields when using the WITH HEADER LINE concept.?
2.Can I avoid BEGIN OF after "DATA :"?
3.Pls tell me the exact use of STANDARD key word.
4.What is the memory sys assigning dynamically when using OCCURS 0?
5.What is the syntax to increase the memory?

Work area it_input is not long enough

Hi,
when am trying to check this one it is saying that it_input is not long enough.
tables: lfa1.
types: begin of t_input,
lifnr type lifnr,
end of t_input.
data: it_input type standard table of t_input.
data: wa_input type t_input.
select * from lfa1 into table it_input where lifnr = lfa1-lifnr.
write:/ lfa1-lifnr.

hi,
As you are using statement in which select * wil get all the fields in the lfa1 table into your internal table, but you are taking wa_input sturcture type t_input which is having only one field so u are getting error work are is no longer enough.
so u use like this
select lifnr from lfa1 into table it_input where lifnr = lfa1-lifnr.
loop at it_input into wa_input.
write : / wa_input-lifnr.
endloop.
hope this helpful
regards
dilip

Problem the workarea xyz is not long enough

hi all ,
I was debugging my code in update task .
Suddenly my program has started giving error "the workarea xyz is not long enough"
at statement :
MODIFY zsdabc FROM TABLE xyz.
Plz help .
Thanks .

MODIFY zsdabc FROM TABLE xyz.
The structure of XYZ is not the same (length, no. of columns, column-definition) as ZSDABC. Is XYZ defined as 'type ZSDABC'? Don't forget your client/mandt field (and to populate it) if it exists in ZSDABC.

Apple A/V-cable not working with 3GS 3.1.3

Apple A/V-cable not working with 3GS 3.1.3
What can I say: the cable is shown in the general settings but the iPod won't play.

Had to do with the TV input

Apple A/V cable not long enough

Similar Messages

Maybe you are looking for