Apple A1081 20" display

I have an older display that I am trying to put to use. I have a Macbook Pro at home and a airbook for work. Neither one of my laptops seem to connect with the display. Is the dispaly compatible or do I need to purchase a new display? The power light just blinks on and off when the display is connected. I am not able to turn it on? Can anyone help?

No, it works only with ADC (plastic) displays.
<http://www.welovemacs.com/6613366r.html>
<http://www.welovemacs.com/9226529.html>
Or look on eBay.  You can also use power supplies made for the 23" and 30" displays/

Similar Messages

  • How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

    How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

    In the Arrangement tab of Displays system preference, drag the menu bar to the picture of the other display.

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

    My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
    I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
    Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

    To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
    The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • How do I connect  Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

  • Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

    I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • Mini DisplayPort adapter for 23" Apple HD Cinema Display?

    hello all,
    I'm sure this has been asked and answered here, but I can't find it! (grrr...)
    I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. The WIKI thing about DVI calls it a "DVI M1-DA (Dual link + USB)".
    http://en.wikipedia.org/wiki/DigitalVisualInterface
    For the life of me, I can't find an Apple (or other) adapter with the 10-pin connector to attach to the iMac?
    many thanks,
    b myers

    If it's the old, plastic cased, 23" display, it may use ADC (Apple Display Connector).
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    In that case, you will need a DVI to ADC adapter
    <http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTA4MzU1OTI>
    in addition to a Mini DisplayPort to DVI adapter/

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • Using Apple TV as display for MacBook

    Is there any way for me to use my Apple TV to display what I see on my macBook wirelessly to my flat screen TV? I have a 1TB Time Capsule as well if that helps.

    Welcome to the  Discussion Forums
    No way as far as I'm aware I'm afraid.

  • VMware Fusion and Apple LED Cinema Display

    I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
    I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
    1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
    2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
    3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
    4) The resolution ia 1277 x 1234. That is weird.
    5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
    Something is wrong, Any help in fixing this would be greatly appreciated.
    Bryan

    you have to separate out what is Fusion and what is Windows native.
    Even doing updates to Windows sometimes should not or cannot be done properly in VM.
    And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
    Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
    You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

  • HT4623 I found an update ios6 in my iphone settings and then I tapped on  install ,but it is going on and nothing is displaying .Only apple logo is displaying  frequently.It has been happening  for 13 hours.my question is how much time it will take to upd

    Can anybody help in my concern below
    I found an update ios6 in my iphone settings and then I tapped on  install ,but it is going on and nothing is displaying .Only apple logo is displaying  frequently.It has been happening  for 13 hours.my question is how much time it will take to update ios

    Read this: iOS 4: Updating your device to iOS 5 or later
    ... oh I think it is a 3gs or a 3
    This makes a difference. What does it say in Settings > General > About?

  • Apple 16" Color Display with 15" Aluminium Powerbook?

    I have pulled my old Mac 16" Color Display out of the shed, only to discover that my 15" powerbook Al running 10.4.6, once connected via DVI-VGA and VGA-Apple VGA, won't show the necessary 832 x 624 resolution option, so I can't use it.
    When I connect my older Pismo powerbook running under 10.3 via VGA-Apple VGA, it does show the necessary resolution!
    Is this a a symptom of 10.4, the DVI adaptor or the video card? Can I copy some driver or something from 10.3 to 10.4 to add support for 832 x 624?
    Brendan

    I think you are trying to use equipment that is just too far behind your modern PowerBook. The Apple 16 inch display was sold 1991 to 1994.
    The computer-end of its cable provides a code at startup that a Mac with a similar connector would use to determine what display is attached, and what resolutions are appropriate. Perhaps the adapters you are using cannot manage to pass that information through in a coherent way.
    More modern displays with a VGA (three-row) connector use a DDC side-channel to negotiate their capabilities with the computer system.
    On the other hand, perhaps the PowerBook simply cannot do that resolution. If the 16 inch display were a multi-Sync display, there might be another resolution you could use.

  • Older Apple HD Cinema Display is detected but no picture

    Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
    Yet.
    So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
    Everything was working fine and I was video editing and Photopshopping to my hearts content.
    I had noticed that recently the display would not come back from sleep without rebooting the computer.
    So that might have been an early clue.
    Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
    I rebooted the computer. This time the monitor displayed black and white vertical lines.
    "Oh joy," thought I.
    I rebooted again.
    This time nothing but the heart of darkness.
    Nothing.
    I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
    I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
    The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
    I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
    I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
    So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
    Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
    Many thanks.
    And good karma to all who give it a head scratch.
    A

    Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
    Good to know I'm not the only one, thanks for posting.

  • A1081 Cinema Display LCD Monitor compatibility

    I am about to buy a reconditioned A1081 Cinema Display LCD Monitor 20"? But i need to know if it will work with my MacBook Pro 10.5.8 and my ipad 2? As i am buying it to use at an exhibition. iIf so what adaptor will i need to hook both of these up? Thank you in advance.

    Are you sure the monitor is set to receive input over the VGA input? Have you tried the DVI input on the monitor? You may have better luck with DVI.

Maybe you are looking for

  • Cannot post Goods receipt in MIGO Error message"Field Business Area requird

    Hai I am posting Goods Receipt ( MIGO) with Reference to Purchase Order its having 47 Line item material. When i will doing Goods Receipt with rreference to po number its triggered error message in :Message No F5808 Field business Area is a Required 

  • Reports 6.0 Hangs

    1. Starts report 6.0 (.rep) from forms using RUN_PRODUCT. 2. Select PREVIEW or SCREEN, reports run fine. 3. Select printer in preview screen then reports hang. 4. Error = RWRBE60 caused ..... CORE40.dll 5. Tried on NT4.0 & Win 98 also same problem. 6

  • Hi I need help please .... I have my credit card information in my account ... But I wanted to delete

    Hi I need help please .... I have my credit card information in my account ... But I wanted to delete & I like too add a App Store card

  • Merge two war files

    I have an ADF BC application using UIX consisting of two war files deployed on tomcat. How to combine both into a single war file.

  • CANT COMPILE A THING - new to Java

    I think I downloaded from this site correctly. So, I create a file, save it, open command prompt, go to the appropriate directory, enter the command line "javac Example1" (Example1 is both the class and file name). For some reason the javac command i