Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirT
Hello fellow mac users, I am currently interested in getting the Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirTunes. However I already have a Linksys Wireless G with SpeedBooster router. Will the Airport Express with iTunes work with my router? Or will it work with any router? Thanks!
P.S. I want to get the Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirTunes
Powerbook G4 Mac OS X (10.4.5)
Yes, it should be possible. Since your iMac is connected via Ethernet to another router, you would have to reconfigure which Network Service you will be using on the iMac to switch between streaming and connecting to the Internet.
For example, I am assuming that the Built-in Ethernet service is currently at the top of the Port Configurations 0list within System Preferences > Network > Show = Network Port Configurations when your iMac is connected to the other router by Ethernet. You would then need to drag the AirPort item to the top of the list, and then, connect to the AirPort Express to stream.
The other option to avoid this is to configure the AirPort Express to join the wireless network created by the 2Wire router.
Similar Messages
-
Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac
Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
FmsalazarApple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess. -
Anybody use an Apple AirPort Express Base Station (windows)
http://store.apple.com/uk/product/MB...mco=MTIxODk3Mw
Im thinking about getting one of these and just wanting people opinions on it working with windows.
Just im a little confused, can i use it as a wireless router insted of my net gear, or will i still have to use my net gear router. My internet comes from the telephone wire if that helps?
Many thanks JamesHello jshrubb. Welcome to the Apple Discussions!
Since you didn't include the model of your Netgear router, it will be a little hard to determine if the AirPort Express Base Station (AX) could replace all of its functions.
So, here's what the AirPort Express is, and is not to help you decide:
o The AX is an Internet wireless router.
o The AX does not have a built-in modem: DSL, ADSL, Satellite or cable ... so one of these will still be required.
o The AX does not have a built-in Ethernet switch. It does have an Ethernet port, but that ports primary function is to be connected to the modem. However, it could be used to connect a wired client, but only if the AX is reconfigured as either a remote or relay base station in a Wireless Distribution System (WDS). The bottom-line here is that if you need to support wired clients, the AX would not be the appropriate choice for your network.
o The AX does support iTunes audio streaming so that when connected to either a pair of powered speakers or an audio system, you can stream iTunes to speakers wirelessly. -
MY BROADBAND HAS BEEN REDUCED DRAMATICALLY IN MY HOME NETWORK USING MY AIRPORT EXTREME BASE STATION.
THIS HAPPENED SO UNEXPECTEDLY OVER THE WEEKEND. I CALL MY ISP AND THEY SIMPLY TOLD ME TO ELIMINATE THE AIRPORT
EXTREME BASE STATION TO CONFIRM THAT WHAT I HAVE PURCHASED IS BEING DELIVERED WHICH I DID AND CONFIRMED.
MEANWHILE USING MY NETWORK UNTIL LAST FRIDAY EVERYTHING LOOKED JUST GREAT.
I WONDER WHETHER I WOULD HAVE TO RESET MY AIRPORT EXTREME TO FACTORY SETTINGS TO RECONFIGURE IT.Hmm. Your ISP is incorrect in telling you that removing any of your routers on the local area network will have anything to do with the bandwidth performance that they provide you at the Internet modem. On the other hand, changing/removing networking equipment on your local network DOES affect bandwidth performance on that local network.
Most likely what the ISP is asking you to do is verify that you are getting their promised download/upload bandwidth at the modem. It appears that you did that and verified that you are getting the stated bandwidth.
So, we should take a look at why, when adding the AirPort Extreme, you are getting less.
First off, which AirPort Extreme model do you have? What is the make & model of the broadband modem that your ISP is providing you?
It is always a good idea to perform a complete power recycle of your networking equipment when introducing new hardware. Please check out the following AirPort User Tip for details.
(p.s. Please don't use all capital letters when you post. It appears to readers that you are shouting. Thx!) -
Does not having windows xp keep your pc from communication with an apple airport base station?
It say's this on the main Apple Website:
Support for WPA requires Mac OS X v10.3 or later. Use of Wi-Fi Protected Access (WPA) reduces the maximum number of network users. When joining an existing wireless network, AirPort Express supports only WPA-Personal. WPA2 requires a Mac computer with an AirPort Extreme Card and Mac OS X v10.3 or later.
So it has to be on WPA-Personal.
The Airport Utility should tell you what is wrong with it when it is orange.
Also, is it running on the same channel? For instance, are they both running on channel 1? Are you extending a network, or creating a network?
Hope that brain snap just puts everything together. -
Can I use an Airport Express Base Station to extend non-Apple router range?
We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way. -
Airtunes with Airport Express Base Station stopped working for no reason
Hello,
I used to play music through AirTunes with no problem. I have an Airport Express Base Station and I'm connected to it with an Airport Extreme Card built-in my iBook G4. When I came home after day at work (with the iBook, which is connected in there to wireless access point but not Apple), Airtunes is not working. Also I can not see my (not closed network) Base Station in Airport Admin Utility, internet connection is still working fine. If I connect to the Base Station by pressing button Other, manually type IP of Base Station I can connect to it and administrate it. Airtunes is allowed there, in iTunes too but it is just not working, I don't know about anything that could has been changed. I think nothing has. AppleTalk is runnig only on Airport card. Thank anyone for any advice. I tried to update firmware in the Base Station today and no software update is available.
I created log /var/log/all.log (.), when I reconnect to the network I can see this there:
May 31 17:37:07 jz-iBook kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown complete
May 31 17:37:02 jz-iBook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[248]: exited abnormally: Hangup
May 31 17:37:02 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:02 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
May 31 17:37:04 jz-iBook lookupd[352]: lookupd (version 369.5) starting - Wed May 31 17:37:04 2006
May 31 17:37:08 jz-iBook kernel[0]: AirPort: Link Active: "www.net23.cz/ziizii" - 0014516f4efd - chan 1
May 31 17:37:08 jz-iBook configd[59]: AppleTalk startup
May 31 17:37:11 jz-iBook launchd: Server 4e3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[352]: exited abnormally: Hangup
May 31 17:37:11 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:11 jz-iBook lookupd[354]: lookupd (version 369.5) starting - Wed May 31 17:37:11 2006
May 31 17:37:14 jz-iBook configd[59]: AppleTalk startup complete
May 31 17:37:26 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
iBook G4 12" Mac OS X (10.4.6)Please perform a "factory default" reset on your AirPort Express. Note you may need to do this a few times to make sure it "sticks." Once completed successfully, the status light should flash amber NOT green.
This type of reset will reconfigure the Express to its factory settings. That is, it will broadcast an unsecured Wi-Fi network with a network name (aka SSID) of something like: Apple Network NNNNNN
Can your Win7 computer find and connect to this network now? If it can, then do so and the AirPort Utility on the PC should now be able to find the Express. -
Extend Range of Belkin Wireless Router with Airport Express Base Station
I would like to know if I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express Base Station?
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.DLink Xtreme wireless N cabled to the Time Capsule 1TB - Simultaneous dual-band Wi-Fi. In addition to extending wireless range, would this also allow me to connect cabled devices to the Airport? In essence, increasing the number of cable ports available on the network?
Connect an ethernet cable from one of the LAN <-> ports on the D-Link router to the WAN (circle icon) port on the Time Capsule.
Configure the Time Capsule as a "bridge" to use the exact same wireless network name, exact security and password as the D-Link router and you will in effect, have one large wireless network. Computers will be able to "roam" from one area to another and they will automatically connect to the router with the strongest signal.
The ethernet ports on the Time Capsule would be active and operate exactly the same as the LAN ports on the D-Link. Computers could plug into either router for an ethernet connection.
The toughest challenge in this type of configuration with routers from two different manufacturers is that they typically use different names for security types. If the security settings between the two routers do not match exactly, you won't have one network, you'll have two, each requiring a separate log on.
Check the configuration pages on the D-Link to see what type of security it is configured to use. Hopefully, it is +WPA2 Personal+, since that is the most compatible type of security among devices. Or +WPA/WPA2 Personal+ would work.
If the D-Link does not use this type of security, what is it using now? What are the other WPA associated settings that are available? We need to know this in order to provide you with the correct step by step configuration.
Post back with your questions and findings. -
Apple airport extreme base station b/g (old model) and airport express
i want to extend the range of my old airport extreme base station, the one that is a circular pyramid. I was wondering if the airport express would work or if I should get something else.
Hello lvpd. Welcome to the Apple Discussion!
i want to extend the range of my old airport extreme base station, the one that is a circular pyramid. I was wondering if the airport express would work or if I should get something else.
Yes, you can extend the older 802.11b/g AirPort Extreme Base Station (AEBS) with the newer 802.11n AirPort Express Base Station (AXn). To do so, they would both need to be reconfigured for a Wireless Distribution System (WDS). -
I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.
How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX. -
Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.
The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters. -
After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?
There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do. -
I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.
All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
Open the airport utility which you find under applications/utilties.
Router setting will depend on what version of the utility you are using.
In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
https://discussions.apple.com/community/wireless/airport
Manuals link http://support.apple.com/manuals/%23airport
If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
What modem do you have?
I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
How exactly is the airport setup now?
How do you connect to the modem?
How is the printer connected? What kind of printer? -
Streaming from Denon receiver to Airport Express Base Station?
Hello,
i know it's possible to strem music, video, etc. from your apple device to a Denon receiver with airplay, but is it also possible, to stream sound from the Denon receiver to an Airport Express Base Station? I'm about to purchase such a Denon receiver and 2 Airport Express Base Station. To the Airport Express Base Station's i want to connect speakers, the Denon receiver will be connected to the TV and Bluray. So i was wondering, if i could stream the sound from the TV / Bluray, via the Denon receiver to the Airport Express Base Stations. Or is the airplay function of the Denon a one-way road?
Thanks for feedback!
JayJayelkay wrote:
is the airplay function of the Denon a one-way road?
yes. -
Airport express base station too old?
I keep intermittently losing my wifi connection with my Macbook Pro. However, my iPhone and my iPad have no problems jumping on the wifi connection.
I have an XBridgeDSL ethernet router modem which is paired with an Airport Express base station and both of them are about 13 or 14 years old. I installed Mavericks when it came out, everything seemed fine, but am wondering if it was a step too far for my poor old kit.
I can get wired connection with the computer no problem, and right now I've managed to get Wi-fi - but it randomly disappears, and the network doesn't show up in the list of available networks.
I've just run Airport Utility and it finally showing my base station, but says it doesn't support it.
Am I having these problems because my base station is too old now?
I don't really want to incurr any unnecessary expense of buying new kit if I don't need to...
At the moment I have to switch between wired and wifi depending on which device I want to use which isn't great.
Any further advice or tips would be great.
Best
HeatherHi,
Yes, that's exactly the same message I got with my base station (but in English). This has worked for me:
-Disconnect from wifi
-Moved computer very close to the router
-Place ethernet cable from router modem to computer, connect to internet wired.
-Left it for a few hours, then put the ethernet cable back into the airport express
-After about 20 mins I went back to the computer and noticed it was connected to wifi again
-Haven't turned it off since so OK so far
-Found a new internet supplier who will supplier a wireless router modem free of charge and signed up. I just have to hang on till 11th Jan!
Slightly unorthodox perhaps, but it's worked
Good luck with yours, my feeling is that my Apple base station is now too old and no longer supported. Also I suspect I'll get better internet download speeds with the new router modem, currently only getting 4000mbs compared to a possible 120,000mbs in our area, and my upload speed is about 0.4mbs.
H
Maybe you are looking for
-
I'm having trouble connecting an external hard drive to my home network via a Widows based operating system and the Airport utility. Please help.
-
I lost WiFi after I upgraded to IOS 6 on my iPhone 4
URGENT ADVICE AND ASSISTANCE NEEDED Hi all the experts out there. I have no problem upgrading to IOS 6 on my iPhone 4S, but when I did the same onto my iPhone 4, after re-start I just cannot connect to WiFi! I had no probelm with this connection PRIO
-
I was using webrtc connection for a video connect. Firefox works in Mac but not work in windows
I was using our company API tokbox SDK to do the servers test between two machines. I blocked one machine ipfw to test the server connection. However, our server connection works well when we are using two mac firefox browser, but not succeed when we
-
How do I save one page from a multi-page pdf document?
Can I take a 65 page pdf file and save it as 65 individual pages?
-
New to JDeveloper, having problems with EJB tutorial.
Hi, I'm new to the world of JDeveloper, I'm trying to follow this tutorial http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ejb/ejb.html Firstly when I create an entity from a table I get the following error; Starting Offline Database Synchroni