Apple Airport Express connection/setup with Siemens SpeedStream 4200

Hi, i am having trouble getting my macbook pro to recognise the Apple Airport Express connection to broadband via the Siemens Speedstream 4200 supplied by Optus.

and make sure you choose PPoE when you set up your router.
(It's not obvious from the Optus paperwork)

Similar Messages

Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
Fmsalazar

Apple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

Apple Airport Express connections.

I have 2 HP printers (4500w and P1102w) that I am trying to connect wirelessly to an Apple Express (old square box) router, which does not have a WPS button--to be able to print wirelessly from four different Apple computers. Both printers will receive print jobs if USB connected to the computers or to the Airport. However, I have had to relocate the router to a position inaccessible by cables, and I need to convert these machines to function wirelessly on the open network.
Some posts and guides say connect the printers by USB and hold down the WPS button on both machines ... but the Airport doesn't have one.
What other technique can be used?
Gary

Thanks. That worked for the 4500w. It is online for all computers. But not the P1102w. Here is the situation:
First, when the 4500w was installed it placed a whole set of files in my "applications" folder. When I installed the P1102w files they went to ...
HD>Library>Printers>hp>laserjet>P1100_1560_1600Series> and in the last folder, 4 files:
hp Laserjet Utility.app, HP Uninstaller.app, HtmlConfig.app, printerAgent, and Status Monitor.app.
(And, the Laserjet Utility simply opes up a header on the computer address line, but does not provide a screen or any options. Essentially, it does nothing).
Page 27 of the Adobe PDF English Instructions that come on the CD, explains how to configure the network ... it says to use the "Wireless Configuration Utility" which doesn't exist in the list above, and doesn't come up on any searches of my drives. It explains the process of using the "Programs" or "All Programs" menu (which must refer to Windows, not Apples), and then the HP>laserjet>P1100_1560_1600Series>Wireless Configuration Menu item, which doesn't exist.
So, where do I find this Wireless configuration Menu?
One other point. Following the PDF instructions, I was able to print out the "Self Test/Device Configuration" sheet, and it indicates an SSID of HP06E57E and it includes a "Bonjour (Apple Airport Express operating system nickname) Name" of "HP Laser Jet Professional P1102w."
And, finally, more thanks for sticking with me. Hopefully, this will eventually end with a new procedure for you guys to publish in the help forums.
Gary

Apple Airport Express to boost wi-fi

I have an Apple Airport Express connected to my hi-fi so that I may play music wirelessly from my Mac. If I connected it directly to the router (at present it only connects to the amplifier aux slot), would it boost broadband signal in my house or do I have to buy another one? Thank you

The AirPort Express cannot wirelessly extend the signal from your wireless router....unless....you happen to have another Apple router.
If you can connect an Ethernet cable from your router to the AirPort Express, and leave it connected at all times, then the AirPort Express could be configured to provide additional wireless range for your existing network.
If you decide to do this, the AirPort Express will need to be reset back to its original factory default settings and then set up again to create a network that uses the exact same name and password as your existing wireless network. The setup "wizard" makes the setup easy, so that all you really need to do is enter the name of the existing wireless network, a name for the AirPort Express, and the password that the existing wireless network is using into a window that will look similar to this:

Apple Airport Express - drops wifi connections after a day or two.....??

Dear Users,
Can anyone assist me, I have 2 Apple Airport Express recievers and an Apple TV2 connected to my iMac. The Apple TV is connected via ethernet and a gigabit switch via the BT Infinity Router. The 2 Apple Airport Expresses are connected via wiresles to the BT router.
Everything works fine, music streams perfectly most of the time.
But after 24-48 hours of being dorment the Router seems to drop the wireless connections to the Apple Airport Expresses, if you reboot the router they connect again immediatley. I have adjusted the router settings to 802.1n, instead of 802.1n/b/g, which seemed to work better for a few days and the connection never dropped and now the problem has started again.
Frankly its not the end of the world, but it means I have to reboot the router everytime we want to use all zones for music, which when you have a wife that moans that 'my setup is too complicted and has to be rebooted everytime', it would be great to resolve this for once and all.....
Have a I missed something simple or do I need a new router/Airport Extreme?
Thanks in advance
Matt

The whole idea here is to test by first powering off your "extending" AirPort.
Then, take a measurement with your laptop at the location of the "extending" AirPort.....to see what quality of signal that it is receiving. Remember, it can only "extend" the quality of signal that it receives.
You would want to see a minimum SNR of 25 at the location of your "extending" AirPort Express. Higher would be better. If it is less than 25, you need to move the "extending" Express closer to the "main" router so that it will receive a better quality signal to extend.
Once you have a location with a decent SNR of 25 or higher, then power the "extending" Express back up at that location.

Apple Airport Express N Ethernet connection problems...

Hello,
I have just setup my apple airport express to connect to my belkin wireless N router F5D8636-4 v2 via Ethernet. I have turned all the wireless features off on the express as I'm only using it to send music to my DAC. It is assigned I.P by DHCP all other computers are manually asigned I.Ps so no conflicts. My computer is also wired to the router and running windows 7 64bit. It all works great apart from when I turn my P.C off.
When I turn it back on it cannot find the airport express over LAN until I reset the apple airport express by powering it down and back on. Is this right? Surely not? OR when im finished with my hi-fi should I be turning the apple airport express off?
Anyone got any suggestions?
Cheers
Dan

problem due to firewall settings - resolved

Apple Airport Express N Ethernet connected disappearing

Hello,
I have just setup my apple airport express to connect to my belkin wireless N router F5D8636-4 v2 via Ethernet. I have turned all the wireless features off on the express as I'm only using it to send music to my DAC. It is assigned I.P by DHCP all other computers are manually asigned I.Ps so no conflicts. My computer is also wired to the router and running windows 7 64bit. It all works great apart from when I turn my P.C off.
When I turn it back on it cannot find the airport express over LAN until I reset the apple airport express by powering it down and back on. Is this right? Surely not? OR when im finished with my hi-fi should I be turning the apple airport express off?
Anyone got any suggestions?
Cheers
Dan

The Express can effectively extend the 2-Wire network if 4 conditions are met during the configuration of the Express to create a wireless network:
1) Same wireless network name as the 2-Wire network
2) Same wireless network security as the 2-Wire network
3) Same password as the 2-Wire network
4) Bridge Mode Operation
Most users know 1) and 3), but 2) is the real key here. If the wireless security setting of the 2-Wire and Express do not match up exactly....then you will have 2 separate wireless networks instead of the seamless network that you desire.
So, the first question....do you know the exact type of security settings that the 2-Wire router is using? If not, it is not possible to configure the Express the way that you want without a long trial and error guesswork process.
You may need to contact your service provider to find out how to access the settings to learn what they are.
If you do know the exact security settings being used by the 2-Wire router, post back with that info and we can provide a step by step configuration guide if you want.
I assume that you are using OS X 10.6.8 as your profile indicates.

My Apple Airport express loses connection

We have a 3-4 months old Apple airport express. When it works, it works really well.
We use it for streaming shows etc on the television via Apple tv and obviously to go on the internet.
We have 1 iphone 5s and 1 iphone 6, 2 iPad Air, 1 MB Air and 1 MB pro Retina so all our devices are pretty much Apple.
The express router is connected straight to the internet cable from the wall, so there is no router in between or anything. I can always connect with the router, but internet is not always pooring through. In other words, im always logged on the wifi, but it seems as something is often blocking the internet. It definitely has something to do with the router because I can be on the internet via the router on the macbook air while both iPads won't work.
I often solve the problem by opening network preference - assist me - continue - log on the net again - type in my password for the computer and then it works again. But this is obviously not a sustainable solution. And this is also not an option on the iPads, so when it doesnt work on the iPads it just doenst work... :-/
What is the issue?

No one?

Airplay won't connect to my Airport Express & is intermittent with Airport Utility

Hi
Yesterday, my iTunes 10 stopped connecting via Airplay to my Airport Express. It spent a long time displaying a Connecting message, then finally gave me this error message: "An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
I have a Macbook Pro 2.5 Ghz Intel Core i5 (6 months old). 4 GB 1600 MHz DDR3.
Running OS X 10.7.5.
My main modem/router is a Livebox and I usually going my Airport Express to the Livebox network to play music.
My Airport Express is 802.11g
All my equipment is within a radius of 2 or 3 feet.
I'm aware of at least one other recent thread about this problem (https://discussions.apple.com/thread/4150757?tstart=0), but none of the solutions suggested have resolved my problem, so I have summarized a list of the actions I have so far taken to try and resolve the problem. Hopefully, this will help others sort this issue out for themselves.
ACTIONS TO SOLVE ISSUE
1. Ran Airport Utility 6.1, which was unable to find my AX.
2. Downloaded, installed & ran Airport Utility 5.6. AU 5.6 still couldn't find my AX, giving me this error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
3. Unplugged the AX and did a hard reset. AU found my AX and I configured it to join my Livebox network. After being configured, the green light came on the AX, which also appeared on the AU list of devices. However, AU still had the message "Waiting for Airport Express to reset…" with a spinning ball for several minutes. So, I closed the AU window (as AU advised), and reopened it. Happily, the AX was still listed.
4. Reopened iTunes and tried to select my AX as speaker output. At that exact moment, the AX vanished from the AU list of devices and, after the long wait, iTunes gave me the same error message as before:
"An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
When I tried to rescan for devices in AU, I got the same error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
5. Hard reset and configuration of AX. This time I didn't close the AU window, I waited for the AX to reset. When the spinning ball finally vanished, I got this error message:
"An error occurred while reading the configuration. Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
6. Apple help pages suggested updating the AX firmware. I downloaded the firmware update, did the AX hard reset/configuration routine, then tried to run the firmware installer and got this error message:
"An error occurred while attempting to communicate with the AirPort Express. (-8)"
7. Ran all the software updates, including upgrading to iTunes 11.
8. Spent over 5 hours doing many many hard resets of the AX, combined with iTunes restarts, MBP restarts etc. Along the way, I discovered that if I hard reset & configured the AX, after a few minutes, AX would disappear from the AU device list without me doing anything.
9. Attempted to change IPv6 options, using following methods:
a. System Preferences -> Network -> Advanced -> TCP/IP -> IPv6 _> Link-local only
b. In Terminal.
networksetup -listallnetworkservices
networksetup -setv6off Wi-Fi
Neither method had any effect on the ability of AU to see my AX.
Phew! I'm now exhausted & rather demoralised. Anyone got any other ideas?

I have been dealing with this for days now. I'm not sure what the solution is either, I've spent most of my vacation from work attempting to get it to work with my speakers and printer, none work still!!
It seems like a lot of ppl are dealing with these errors but there isn't one solid solution out there.
Try to set the AX wirless setting to "off" and only have it work for Airplay, Does it work for you?
One last thing, could this be an update problem? As in, you update your firmware/software and it renders the AX obselte. My AX is old probably a little older than 4-5 years, what about your?
I would really like to get this to work as I do not think I need a new AX to make this work.
Let me know your thoughts.
B.

Connecting Apple TV, Smart TV (Panasonic) to Apple Airport Express

Hi,
I just want to make sure i have got most of this correct. I want to connect from my router (via hard wire ethernet) to my Apple Airport Express which will then serve to my stereo (change settings in airport utility and also extend my wireless) Cable goes into the WAN port. Then an ethernet cable from the Airport Express (LAN port) to my Apple TV which connects to the TV via HDMI.
All i then need to do is find a way of connecting my smart TV via ethernet, how can i do this?
For information the Apple TV, Express, Stereo and Panasonic TV are all about 4m away from the router and my iMAC. I can only run one ethernet cable to my entertainment collection under the edge of the carpet. I want to connect all my kit via ethernet hard wire as i know its faster and i have been having issues with the signal becoming interupted from other sources.
My printer is already wireless but is located next to my iMAC so will prob hard wire this
Thanks

You will need a small switch. Or you will need to use wireless on the ATV or the TV .. as long as the express is close that will work fine. Especially if you connect to the 5ghz.
But go into any computer store and buy a 5 port or 8 port 10/100 switch.. but you could also buy a faster one, gigabit which is more useful into the future.
Wire it without using both ports in the express.. connect everything to the switch rather than express and that will be fine.. especially if the main router is gigabit.
The switches will be $20 for the slower 100mbit and perhaps $50 for the gigabit..

Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

Airport express not working with apple products

We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank you

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

My Apple Airport Express is blinking Amber and I cannot find it with the utility

My Apple Airport Express is blinking Amber and I cannot find it with the utility

Hi, had the same problem -
1) Connected AE to Time Capsule with Ethernet cable - Configured it - All worked fine
2) Removed Ethernet cable between AE og TC - All worked fine
3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
B) Seems that AE are not able to reconnect to configured network after a power loss.
This is a little bit ****** - older airport utility had none of the problems (A and B)

Setup apple airport express

I'm trying to extend my network with the apple airport express the 2nd one ( newest) ,
the first part of the setup was ok but once I'm trying to change the AP Express from join an existing network to extend existing network its giving me problem and pretty much its going back to orange (LED) light .

The AirPort Express can only wirelessly "extend" a wireless network that has been provided by another Apple router. The Express cannot "extend" a wireless network from a 3rd party router.
Another way to say the same thing is that if you want to extend your network, you will need at least two Apple routers.

Apple Airport Express connection/setup with Siemens SpeedStream 4200

Similar Messages

Maybe you are looking for