Apple Airport Express doesn't seem to find wireless conection?

I have a D-Link wireless G router connected to my ISP modem then connected to my main PC, my wife just bought me an "Airport Express" for my birthday for the sole purpose of streaming music from my ITunes (on PC) to outside speakers. when I try to set it up it seems that the Airport is not recognising the wireless router, with a continuous flashing amber light, when I scan for devices with airport utility it tells me no wireless connections can be found, yet I use my laptop wirelessly with no problems. Any suggestions?

Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

Similar Messages

Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

First, the reason for my compounded frustration:
I wrote a lengthy, comprehensive post on this late last night. I submitted it and received a notice at this URL:
https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
It gave a message: "A yellow sticky bearaing the words, "We'll be back soon." and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly." Needless to say, it never came back. This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night. Sadly, it contained only a portion of the first line.
I'm going to try it again. The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
I've never gotten this Airport Express (1st gen, purchased mid 2010) to work. I thought it was working, but working poorly. A green light on the device is, apparently, NOT an indication of connection to the wireless. It wasn't workingl.
Description of devices which use the network:
I have a Broadband network with a modem.
It is connecteed to my 2T Timecapsule (purchased mid 2010).
Connected to that is a 24 port Cisco Router.
Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
Connected to the router are many ethernet cables giving hard-wired access to:
Printers (HP 8600 Pro purchased 2012))
MacBook Pro (purchased mid 2010) and
IMAC (purchased mid 2010).
3 Apple TV devices (1st generation purchased early 2011)
1 Apple TV device (2nd generataion purchased August 2012)
Connecting to the Wireless Network are IOS devices (current IOS versions on all)
iPad 2nd generation (purchased the day it was available)
iPad 3rd generation (purchased the day it was available)
iPod (mid 2010)
iPhones (4S)
Description of Layout of Network/House
My home is approximately 70 feet by 25 feet.
All Networking hardware is at one end of the house, the south side.
Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
Description of Problem
Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010) revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
Description of actions taken to correct the problem
Loaded Airport Utility on MacBook Pro.
Airport Express shows green light on screen.
Double clicked on Airport Express Icon
Message that Airport Express was unable to extend the network
Message changes suddenly to something about not finding the Airport Express
Airport Utility searches Airport Express, attempting to read its settings
Message appears: Device not found. Airiport Express was previously part of the network, and offers to let me "forget" the base station.
I exit the error message.
A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
Airport Express shows green light (as always)
Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
Moved Airport Express to the room at the south end of the house containing all network devices
Plugged it in with clear, completely unobstructed view of Time Capsule.
Light on Airport Express flashes yellow and then turns solid green (like always)
Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
Close Airport Utility on Mac
Reboot Mac
Open Airport Utility on Mac
Airport Express still shows as it did in 1.1.7. above.
Attempts to check Airport Express' access to Wireless network:
Unplugged Airport Express HEY! THE GREEN LIGHT WENT OUT!!! ;0)
Disconnected all Ethernet cables.
Tested ALL devices for Wireless access.
All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
Followed instructions contained in a similar discussion about Airport Express not functioning:
Unplugged all Networking Hardware
Powered off all Equipment which access the Internet in any possible way.
Powered up all Networking Hardware, one at a time, in the order described in that discussion.
Powered up all Equipment which access the internet, one at a time.
Tested ethernet cablingAll equipment functioning.
Tested Wireless access:
Removed all ethernet cabling
All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house. Those perform exactly as they did in step 3.3.2.
Connected all ethernet cabling.
Plugged Airport Express into socket in the Network Hardware room at the south end of the house. I get exactlyt the same results as before. The lovely green light glows on the Airport Express. Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
Airport Utility shows Airport Express with a green light
I double click the Airport Express Icon
Box says connection is average and status is (green light) Extended Network.
I click Edit
I go through each tab. I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected.
Under the AirPlay tab, I note that "Enable airPlay" is selected.
I click cancel and leave the Edit screens.
Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
I watch the Airport Utility screen closely. Nothing is happening.
With bated breath, I double click on the Airport Express icon.
The popup box shows "extended wireless network"
I click on edit and we start the whole mess over again. (See 1.1-9. above)
Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem. He will not live wireless while even one ethernet cable is poking up through a floorboard.
Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
Again, curious to know ... I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
I close and reopen Airport Utility (as I always do, but forgot to write)
I click on the Airport Express icon (which bears a little green light like the other big boys).
BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection.
I click on the Edit option.
I buzz through all the tabs. I cancel instead of update, leaving everything as it was (as I did the first time)
I decide to go back into edit and select "Internet Options" under the "Internet" tab.
Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when "Enable IPV6 Connection Sharing" is enabled.
I check the other tabs to see if anything has changed in their menus
Jesus Saves and so did I.
Apple updates and so did I.
I am warned that my device and its network services will be temporarily unavailable if I continue.
It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE. What? An improvement in performance is warned?
Life continues and so do I.
I breathe deeply to decrease my adrenaline.
Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
I click on the Airport Express Icon. This time my connection is only "good".
I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access. I did. It is.
I change my settings back to the way they once were, I save like Jesus and Update like Apple
I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
I save.
I click on the Airport Express Icon. My connection has degraded further to "Average"
I click on edit just to see what will happen, but no further information is forthcoming. Settings are as I left them.
I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
I click the Airport Express Icon.
I click Edit
I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
I am still "unable to extend the Wireless network"
I disconnect the Airport Express from my MacBook Pro.
After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
It has no light or error messages
It has a yellow triangle with exclamation point
It has no light or error message
It has a yellow triangle with exclamation point
I finally decide to see what THIS error messages says. It says Device Not Found. Patti Harada's AirPort Express was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Click Forget to remove this base station from this network."
I click "Forget". Airport Utility has forgotten the Airport Express ever existed. It has also forgotten how to find it again.
I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
I wonder if I should recable the Airport Express to my MacBook Pro
I decide I've had about enough.
I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem. What is my problem? I am so busy fighting off Alligators that I forgot I only came in to drain the swamp! Ah, but I remember now: Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
Any solution that works will do. I'll buy another piece of whatever kind of equipment you think best.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

My airport express doesn't seem to have extended the wifi range

I have recently bought an Airport Extreme which connects to my modem (broadband) via ethernet. This wifi signal does not reach the kitchen and we need internet access there, so I have bought an Airport Express, hoping it would extend the signal and give us internet in the kitchen. I have set them both up, and there are green lights on both, but the range does not seem to have improved at all! Can someone please walk me through the setup, I may have missed something.
Thanks!

Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

Have 2x Airport Express, doesn't seem to be extending network

Hi all,
I have a Time Capsule and 2 Airport Express'. My configuration is as follows:
1. Time Capsule is in Office connected to ethernet DSL Router
2. Airport Express 1 in Living Room
3. Airport Express 2 in Conservatory
I bought the Airport Express' to extend the wireless signal (wirelessly - which I was told by somebody in an Apple Store I could do). All have been setup using the Airport Utility (the Time Capsule created a new network, Airport Express' to existing network) and have a solid green light. They are all acquiring an IP Address from the DSL Router correctly. I can see all 3 in the living room as this is the middle point. However, if I go into the Conservatory my Macbook Pro loses all signal. I can see my Network in the airport list but when I click on it, it asks for a password and then times out.
If somebody could help me with this problem I would be extremely grateful.
Many thanks for your help.

Welcome to the discussions!
I assume that you have the AirPort Express(n) as the "g" version will not be compatible with the "extend a wireless network" function.
Here's a checklist to go through to make sure you have the proper settings:
_On the Time Capsule:_
Open AirPort Utility, click Manual Setup
Click the Wireless tab just below the row of icons
Wireless Mode should be "Create a wireless network" (It's probably already set this way)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save settings
_On each Express:_
Open AirPort Utility, Click Manual Setup
Click the Wireless tab
Wireless Mode should be set to "Extend a wireless network". If you don't see this choice, hold down the "option" key when you click on the selection box
When you select "Extend.." your wireless network created by the TC will appear as a choice to extend. Select it and enter the wireless password.
Make sure there is a check mark next to "Allow wireless clients"
Update to save settings.
Whenever you plug the Express in, it will automatically extend the main wireless network from the Base Station. The ethernet port is also "live" in this setup. But note...you cannot extend the "guest" network if you have a dual band Time Capsule.
For more info, refer to the Designing AirPort Networks guide, pages 43-44.
http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

Apple Airport Express N Ethernet connection problems...

Hello,
I have just setup my apple airport express to connect to my belkin wireless N router F5D8636-4 v2 via Ethernet. I have turned all the wireless features off on the express as I'm only using it to send music to my DAC. It is assigned I.P by DHCP all other computers are manually asigned I.Ps so no conflicts. My computer is also wired to the router and running windows 7 64bit. It all works great apart from when I turn my P.C off.
When I turn it back on it cannot find the airport express over LAN until I reset the apple airport express by powering it down and back on. Is this right? Surely not? OR when im finished with my hi-fi should I be turning the apple airport express off?
Anyone got any suggestions?
Cheers
Dan

problem due to firewall settings - resolved

Apple Airport Express N Ethernet connected disappearing

Hello,
I have just setup my apple airport express to connect to my belkin wireless N router F5D8636-4 v2 via Ethernet. I have turned all the wireless features off on the express as I'm only using it to send music to my DAC. It is assigned I.P by DHCP all other computers are manually asigned I.Ps so no conflicts. My computer is also wired to the router and running windows 7 64bit. It all works great apart from when I turn my P.C off.
When I turn it back on it cannot find the airport express over LAN until I reset the apple airport express by powering it down and back on. Is this right? Surely not? OR when im finished with my hi-fi should I be turning the apple airport express off?
Anyone got any suggestions?
Cheers
Dan

The Express can effectively extend the 2-Wire network if 4 conditions are met during the configuration of the Express to create a wireless network:
1) Same wireless network name as the 2-Wire network
2) Same wireless network security as the 2-Wire network
3) Same password as the 2-Wire network
4) Bridge Mode Operation
Most users know 1) and 3), but 2) is the real key here. If the wireless security setting of the 2-Wire and Express do not match up exactly....then you will have 2 separate wireless networks instead of the seamless network that you desire.
So, the first question....do you know the exact type of security settings that the 2-Wire router is using? If not, it is not possible to configure the Express the way that you want without a long trial and error guesswork process.
You may need to contact your service provider to find out how to access the settings to learn what they are.
If you do know the exact security settings being used by the 2-Wire router, post back with that info and we can provide a step by step configuration guide if you want.
I assume that you are using OS X 10.6.8 as your profile indicates.

My Apple Airport Express is blinking Amber and I cannot find it with the utility

My Apple Airport Express is blinking Amber and I cannot find it with the utility

Hi, had the same problem -
1) Connected AE to Time Capsule with Ethernet cable - Configured it - All worked fine
2) Removed Ethernet cable between AE og TC - All worked fine
3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
B) Seems that AE are not able to reconnect to configured network after a power loss.
This is a little bit ****** - older airport utility had none of the problems (A and B)

I am trying to link our xbox and PC into our wireless network. I am using an apple airport express and it is asking me for a WEP Key. Where can I find my wep key?

I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?

You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

Rfh723-
You are technically way ahead of me, so I can't argue with what you did.
How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer? If the iPad still can't find the printer when connected to this network, then something is broken!
(Also try a different Ethernet cable.)
Fred

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Apple Airport Express connections.

I have 2 HP printers (4500w and P1102w) that I am trying to connect wirelessly to an Apple Express (old square box) router, which does not have a WPS button--to be able to print wirelessly from four different Apple computers. Both printers will receive print jobs if USB connected to the computers or to the Airport. However, I have had to relocate the router to a position inaccessible by cables, and I need to convert these machines to function wirelessly on the open network.
Some posts and guides say connect the printers by USB and hold down the WPS button on both machines ... but the Airport doesn't have one.
What other technique can be used?
Gary

Thanks. That worked for the 4500w. It is online for all computers. But not the P1102w. Here is the situation:
First, when the 4500w was installed it placed a whole set of files in my "applications" folder. When I installed the P1102w files they went to ...
HD>Library>Printers>hp>laserjet>P1100_1560_1600Series> and in the last folder, 4 files:
hp Laserjet Utility.app, HP Uninstaller.app, HtmlConfig.app, printerAgent, and Status Monitor.app.
(And, the Laserjet Utility simply opes up a header on the computer address line, but does not provide a screen or any options. Essentially, it does nothing).
Page 27 of the Adobe PDF English Instructions that come on the CD, explains how to configure the network ... it says to use the "Wireless Configuration Utility" which doesn't exist in the list above, and doesn't come up on any searches of my drives. It explains the process of using the "Programs" or "All Programs" menu (which must refer to Windows, not Apples), and then the HP>laserjet>P1100_1560_1600Series>Wireless Configuration Menu item, which doesn't exist.
So, where do I find this Wireless configuration Menu?
One other point. Following the PDF instructions, I was able to print out the "Self Test/Device Configuration" sheet, and it indicates an SSID of HP06E57E and it includes a "Bonjour (Apple Airport Express operating system nickname) Name" of "HP Laser Jet Professional P1102w."
And, finally, more thanks for sticking with me. Hopefully, this will eventually end with a new procedure for you guys to publish in the help forums.
Gary

My Apple Airport express loses connection

We have a 3-4 months old Apple airport express. When it works, it works really well.
We use it for streaming shows etc on the television via Apple tv and obviously to go on the internet.
We have 1 iphone 5s and 1 iphone 6, 2 iPad Air, 1 MB Air and 1 MB pro Retina so all our devices are pretty much Apple.
The express router is connected straight to the internet cable from the wall, so there is no router in between or anything. I can always connect with the router, but internet is not always pooring through. In other words, im always logged on the wifi, but it seems as something is often blocking the internet. It definitely has something to do with the router because I can be on the internet via the router on the macbook air while both iPads won't work.
I often solve the problem by opening network preference - assist me - continue - log on the net again - type in my password for the computer and then it works again. But this is obviously not a sustainable solution. And this is also not an option on the iPads, so when it doesnt work on the iPads it just doenst work... :-/
What is the issue?

No one?

Connecting Apple TV, Smart TV (Panasonic) to Apple Airport Express

Hi,
I just want to make sure i have got most of this correct. I want to connect from my router (via hard wire ethernet) to my Apple Airport Express which will then serve to my stereo (change settings in airport utility and also extend my wireless) Cable goes into the WAN port. Then an ethernet cable from the Airport Express (LAN port) to my Apple TV which connects to the TV via HDMI.
All i then need to do is find a way of connecting my smart TV via ethernet, how can i do this?
For information the Apple TV, Express, Stereo and Panasonic TV are all about 4m away from the router and my iMAC. I can only run one ethernet cable to my entertainment collection under the edge of the carpet. I want to connect all my kit via ethernet hard wire as i know its faster and i have been having issues with the signal becoming interupted from other sources.
My printer is already wireless but is located next to my iMAC so will prob hard wire this
Thanks

You will need a small switch. Or you will need to use wireless on the ATV or the TV .. as long as the express is close that will work fine. Especially if you connect to the 5ghz.
But go into any computer store and buy a 5 port or 8 port 10/100 switch.. but you could also buy a faster one, gigabit which is more useful into the future.
Wire it without using both ports in the express.. connect everything to the switch rather than express and that will be fine.. especially if the main router is gigabit.
The switches will be $20 for the slower 100mbit and perhaps $50 for the gigabit..

So does the Apple Airport Express take the place of the "Charter" modem and router we already have in our house?

We purchased the Apple Airport Express and in our home have 2 iPads, 2 iPhones, 1 iPod, 1 MacBook, and two *D* computers and a Brother printer along with Apple TV and a projector.
1. How do we get them all to mirror the content of the various devices onto the TV or the projector?
2. Can we now unplug the *Ch* equipment from our cable source and plug in the airport express?
Putting all the pieces together is just a little beyond us at this moment. Maybe it will click with a little help. Thanks!
"Stuck" in Montgomery

I'm pretty sure you will find that the Airport Express will not work with your router unless it's an Airport Extreme Base Station.
You can do two things with the Airport Express. You can connect it by USB or Ethernet cable to a device like a printer that does not have wireless capability and provide a wireless connection to your router provided the two devices will "talk" to each other.
You can connect it to a Mac to provide audio streaming wirelessly.
You may be able to use it with your projector provided it has its own wireless capability, but I don't know if an Airport Express will stream video. Same for your TV.
In fact for your home I'm not sure the AEX would be of much use except to connect to your Mac in order to stream audio to another wireless device in your home. But only if you can get the AEX to work with your router or replace the router with an AEBS (which you could only do if your current router is a discrete device connected to your Charter cable modem.)

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

Apple Airport Express doesn't seem to find wireless conection?

Similar Messages

Maybe you are looking for