Apple AirPort Express - HP LaserJet M1120 won't print entire document

Hi,
My first post. I've recently purchased Airport Express and installed all necessary programmes (incl. Airport Base Station Agent and Bonjour print service) on my Win 7 Ultimate x64.
The device is set up as "Join a existing network".
Airplay works without any issues, but printing does not.
I've also installed the driver for HP LaserJet M1120 printer.
When I send something to print (regardless of the file), it won't print the entire document. Usually, it prints smaller documents (up to 10 pages) normally, but when it comes to larger documets it prints only half of the document.
I send 30 pages document to print and it prints only 15 pages. Then I need to re-send print command and again, it prints only half - 7 or 8. Printer just stops.
Sometimes i get "Error-printing", but not always.
This issue happens on all 4 PCs that I have at home all running Win 7 Ultimate x64 or Win Vista Home Premium x32.
Any ideas?
HP Print Diagnostic Utility did not find any issues also. Says everything is OK.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Similar Messages

LaserJet 1020 won't print first document after powering up

My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
I'm using Windows Vista Professional and the printer is connected via USB 2.0.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My Apple Airport express loses connection

We have a 3-4 months old Apple airport express. When it works, it works really well.
We use it for streaming shows etc on the television via Apple tv and obviously to go on the internet.
We have 1 iphone 5s and 1 iphone 6, 2 iPad Air, 1 MB Air and 1 MB pro Retina so all our devices are pretty much Apple.
The express router is connected straight to the internet cable from the wall, so there is no router in between or anything. I can always connect with the router, but internet is not always pooring through. In other words, im always logged on the wifi, but it seems as something is often blocking the internet. It definitely has something to do with the router because I can be on the internet via the router on the macbook air while both iPads won't work.
I often solve the problem by opening network preference - assist me - continue - log on the net again - type in my password for the computer and then it works again. But this is obviously not a sustainable solution. And this is also not an option on the iPads, so when it doesnt work on the iPads it just doenst work... :-/
What is the issue?

No one?

Apple airport express not recognised

I have a new iMac running on Yosemite and an old(ish) first gen apple airport express which allows me to stream itunes to my nice big speaker and that works great.
Also have an Apple TV, an iphone and an iPad and they all talk to each other fine.
Have bought another, second hand, first gen (model number A1088) apple airport express as I want to get another nice speaker for another room so I can have music streaming throughout the house.
However, when I plug this second apple airport express in all I get is a flashing amber light and it's not recognised on the airport utility on the mac or on my iphone.
When I disconnect my original apple airport express and leave the 2nd one still connected I "think" my Mac detects it but it says the Airport Utility does not work with this device.
Can anyone please help?
I have power cycled everything (inc modem/router) and no change.
Thanks

Believe it or not I have got it all working.
I ethernet connected the troublesome AE to my router, downloaded AU 5.6 and configured it to join my existing home wifi network.
Yes my iMac's and iPhone's AU won't allow me to change any settings but they both now see it.
If I want to make any changes I just use the AU 5.6 that I now have on my iMac. And any changes I want to make on the AE which I have been successfully using I just use the Yosemite AU.
All good. Now off to go shopping for a nice powered speaker.

Apple Airport Express connections.

I have 2 HP printers (4500w and P1102w) that I am trying to connect wirelessly to an Apple Express (old square box) router, which does not have a WPS button--to be able to print wirelessly from four different Apple computers. Both printers will receive print jobs if USB connected to the computers or to the Airport. However, I have had to relocate the router to a position inaccessible by cables, and I need to convert these machines to function wirelessly on the open network.
Some posts and guides say connect the printers by USB and hold down the WPS button on both machines ... but the Airport doesn't have one.
What other technique can be used?
Gary

Thanks. That worked for the 4500w. It is online for all computers. But not the P1102w. Here is the situation:
First, when the 4500w was installed it placed a whole set of files in my "applications" folder. When I installed the P1102w files they went to ...
HD>Library>Printers>hp>laserjet>P1100_1560_1600Series> and in the last folder, 4 files:
hp Laserjet Utility.app, HP Uninstaller.app, HtmlConfig.app, printerAgent, and Status Monitor.app.
(And, the Laserjet Utility simply opes up a header on the computer address line, but does not provide a screen or any options. Essentially, it does nothing).
Page 27 of the Adobe PDF English Instructions that come on the CD, explains how to configure the network ... it says to use the "Wireless Configuration Utility" which doesn't exist in the list above, and doesn't come up on any searches of my drives. It explains the process of using the "Programs" or "All Programs" menu (which must refer to Windows, not Apples), and then the HP>laserjet>P1100_1560_1600Series>Wireless Configuration Menu item, which doesn't exist.
So, where do I find this Wireless configuration Menu?
One other point. Following the PDF instructions, I was able to print out the "Self Test/Device Configuration" sheet, and it indicates an SSID of HP06E57E and it includes a "Bonjour (Apple Airport Express operating system nickname) Name" of "HP Laser Jet Professional P1102w."
And, finally, more thanks for sticking with me. Hopefully, this will eventually end with a new procedure for you guys to publish in the help forums.
Gary

Apple Airport Express NOT Working! Internet IS working.

I have Apple Airport Express. It is wireless and multiple computers as well as cable are all able to access internet because of this handy device. However I have unplugged it because I was having an issue with Apple TV... and I plugged everything back in and I won't get internet. I called my internet provider and they had me hook up the internet directly to my laptop (skipping the Apple Airport Express) and now I have internet again! However, I only have internet on the one computer that is hooked up... not all the computers/TVs/Apple TVs/iPad in the house.
It isn't an issue with the internet provider because I can get internet. I can't help but think that it is a problem with the Apple Airport Express. I've unplugged everything, waited a few minutes and plugged everything back in. I've done this a few times. Nothing seems to work. What am I doing wrong? I was working fine before the first time I unplugged (and that was due to another Apple device, I think, going wrong).
Help!

Morning zannahdoll,
Thanks for using Apple Support Communities.
Some Internet service providers use a method called "hardware access provisioning" to regulate access to their networks. It normally means that only one of your devices (such as a computer, base station, or router) can connect directly to your modem at any given time.
For more information on this, take a look at this article:
AirPort Base Station: ISP provisioning may prevent Internet connection via broadband (cable or DSL)
http://support.apple.com/kb/ht2460
Hope this helps,
Mario

How to use my 3g dongle on my Apple Airport Express?

I have a 3g hspa dongle.I want to know that my dongle can be used with Apple Airport Express utility.I want to connect my dongle into Apple Airport Express utility and share the internet with my ipad,ipod and iphone.I want to know how to do this?

Hi Bob, just wondering if i use a Ethernet USB adapter, connect USB end to the 3G dongle and the ethernet end, with a small ethernet cable to the WAN port of the airport express, is it still possible to use the internet in the dongle through airport express?
Regards,
Vikas

Is it possible to create a hot spot with Apple Airport Express 2nd Generation Dual Band Wireless Router, usefull in a hotel with ethernet wall sucket.

is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

Erro 3256 using Apple Airport Express with Windows XP Pro SP2

I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
exactly the same distance over the same network.
How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
I keep getting "unknown error occurred 3256"
Help please. Do I have to do something to the network? or???
Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

Connecting Apple TV, Smart TV (Panasonic) to Apple Airport Express

Hi,
I just want to make sure i have got most of this correct. I want to connect from my router (via hard wire ethernet) to my Apple Airport Express which will then serve to my stereo (change settings in airport utility and also extend my wireless) Cable goes into the WAN port. Then an ethernet cable from the Airport Express (LAN port) to my Apple TV which connects to the TV via HDMI.
All i then need to do is find a way of connecting my smart TV via ethernet, how can i do this?
For information the Apple TV, Express, Stereo and Panasonic TV are all about 4m away from the router and my iMAC. I can only run one ethernet cable to my entertainment collection under the edge of the carpet. I want to connect all my kit via ethernet hard wire as i know its faster and i have been having issues with the signal becoming interupted from other sources.
My printer is already wireless but is located next to my iMAC so will prob hard wire this
Thanks

You will need a small switch. Or you will need to use wireless on the ATV or the TV .. as long as the express is close that will work fine. Especially if you connect to the 5ghz.
But go into any computer store and buy a 5 port or 8 port 10/100 switch.. but you could also buy a faster one, gigabit which is more useful into the future.
Wire it without using both ports in the express.. connect everything to the switch rather than express and that will be fine.. especially if the main router is gigabit.
The switches will be $20 for the slower 100mbit and perhaps $50 for the gigabit..

So does the Apple Airport Express take the place of the "Charter" modem and router we already have in our house?

We purchased the Apple Airport Express and in our home have 2 iPads, 2 iPhones, 1 iPod, 1 MacBook, and two *D* computers and a Brother printer along with Apple TV and a projector.
1. How do we get them all to mirror the content of the various devices onto the TV or the projector?
2. Can we now unplug the *Ch* equipment from our cable source and plug in the airport express?
Putting all the pieces together is just a little beyond us at this moment. Maybe it will click with a little help. Thanks!
"Stuck" in Montgomery

I'm pretty sure you will find that the Airport Express will not work with your router unless it's an Airport Extreme Base Station.
You can do two things with the Airport Express. You can connect it by USB or Ethernet cable to a device like a printer that does not have wireless capability and provide a wireless connection to your router provided the two devices will "talk" to each other.
You can connect it to a Mac to provide audio streaming wirelessly.
You may be able to use it with your projector provided it has its own wireless capability, but I don't know if an Airport Express will stream video. Same for your TV.
In fact for your home I'm not sure the AEX would be of much use except to connect to your Mac in order to stream audio to another wireless device in your home. But only if you can get the AEX to work with your router or replace the router with an AEBS (which you could only do if your current router is a discrete device connected to your Charter cable modem.)

Apple Airport Express: How To Change IP Address While in Bridge Mode

Hello, I have a Apple Airport Express router and it has been good for a few years. Just wondering how to change my public IP address. I am also in Bridge mode to a cisco router. Also I am on a Windows 8 computer and this is mainly what I want to change the ip for.

Power cycle the cable modem.. I presume that is what the cisco router is.. your modem.. if not tell us precise model and make of the modem.
The public IP is not changed by you.. it is changed by your ISP.. normally if you power cycle the modem on a dynamic system you will get a new IP.. if not call the ISP and request them to make a change.
It is never really necessary unless you got banned from a site.
I am on a Windows 8 computer and this is mainly what I want to change the ip for.
There is no logical link to needing a new public IP to being on a windows 8 computer.
Explain more about your problem.

I am trying to link our xbox and PC into our wireless network. I am using an apple airport express and it is asking me for a WEP Key. Where can I find my wep key?

I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?

You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

Apple TV viewing of my PCs iTunes without internet thru Apple Airport Express

Can I do an Apple TV viewing of my PCs iTunes without internet thru Apple Airport Express?

Other than for purchased movies/TV shows, yes. You will need the internet to homeshare protected content though.

My Apple Airport Express is blinking Amber and I cannot find it with the utility

My Apple Airport Express is blinking Amber and I cannot find it with the utility

Hi, had the same problem -
1) Connected AE to Time Capsule with Ethernet cable - Configured it - All worked fine
2) Removed Ethernet cable between AE og TC - All worked fine
3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
B) Seems that AE are not able to reconnect to configured network after a power loss.
This is a little bit ****** - older airport utility had none of the problems (A and B)

Apple AirPort Express - HP LaserJet M1120 won't print entire document

Similar Messages

Maybe you are looking for