Apple AirPort Express - use only as wireless audio gateway

Hello!
I use a Samsung Notebook (Q35) and iTunes extensively. My WLAN (801.11 g) connection is already set up with an existing access point and router - but what I really want to do is to make up a wireless audio connection between iTunes and my stereo system. Sounds like the AirPort Express is the right thing to do - but, please, can anybody tell me
a) if I can use both my existing WLAN network and the AirPort Express as ONLY audio gateway to my stereo TOGETHER at the same time (I do not want to include the AirPort into my WLAN-DSL network - I only want to use it as audio gateway to the stereo),
b) which performance I can expect in such configuration (does surfing the internet slow down the audio link in such configuration)?
c) can I use the AirPort Express to take up an extrenal harddrive in such a configuration?
Do You have any suggestions of alternatives for a wireless audio gateway to the stereo? Are there other, generally useable ways?
Thanks very much for Your answer in advance.
Björn
P.S.: Do You know - can I use the USB connector in the AirPort Express to connect to a USB hub - and use it to connect it to my iPod and synchronize my iPod wireless?

hi Björn,
a) if I can use both my existing WLAN network and the AirPort Express as ONLY audio gateway to my stereo TOGETHER at the same time (I do not want to include the AirPort into my WLAN-DSL network - I only want to use it as audio gateway to the stereo),
the Airpor Express can be configure to join your existing WLAN. so as a part of your local network, it will be an accessible device while you can still used your internet.
b) which performance I can expect in such configuration (does surfing the internet slow down the audio link in such configuration)?
i haven't notice a significant slow down while i'm surfing internet and streaming AirTunes but i'm not able to tell you how much bandwidth AirTunes actually needs.
c) can I use the AirPort Express to take up an extrenal harddrive in such a configuration?
No, only the new Airport Extreme n base station can support AirDrive but the Airport Extreme base station does not have the AirTunes features.
Do You have any suggestions of alternatives for a wireless audio gateway to the stereo? Are there other, generally useable ways?
personnally, i do beleive that the AirTunes features you will get with the Airport Express is the better alternative since you already use iTunes for your playback.
P.S.: Do You know - can I use the USB connector in the AirPort Express to connect to a USB hub - and use it to connect it to my iPod and synchronize my iPod wireless?
to my knowledge, the usb socket on the Airport Express can only be used by a USB printer or a AirTunes remote control. you will not be able to synchronize your iPod on the Airport Express.

Similar Messages

  • Airport Express used to extend wireless network from Linksys?

    I've been asked if I can straighten out a wireless mess at a local church. They have a wireless network in their office (a seperate small building) using a linksys transmitter.
    The church (a seperate building 50 yards away is where they want to extend the network to.
    Currently, I can read the network there on whqat they have now but something is misconfigured and the manufacturer is being of little assistance.
    Has anyone used an Apple Airport Express to extend a 3rd party wireless router? Ive decided it may just be worth the cost to dump the relay they have and simply buy an airport express.
    Suggestions?

    The Linksys WRT54G and WRT54GS (not latest versions v5) are the only 2 known Linksys routers compatible with Apple's WDS.
    So if you are using one of those routers you should be able to do it.
    If you are using a different router it probably will not work.

  • Apple Airport Express and PC Laptops - Wireless Network Help

    Hello all,
    I have two Wi-Fi enabled laptops running Windows XP, an Apple Airport Express unit and a Netgear DG-632 Modem/Router.
    At present the DG-632 is running in modem mode and is connected to one laptop using the ethernet connection. The Netgear DG-632 Modem/Router has one ethernet connection and one USB connection.
    My understanding is that if i run one laptop off the USB connection on the Modem/Router and connect the the DG-632 to the ethernet connection then the laptop on USB has to be turned on for the second laptop to access the wireless network.
    Assuming the above is true (i am very likely wrong), it would be nice if both laptops were able to access the internet wirelessly via the Airpot Express Unit.
    However, being a complete novice at networking, i am little confused about how to do this?
    Any help, tutorials or advice would be greatly appreciated.
    Thanks in advance.

    I'm new. I have a Dell Laptop XP and my wife has a
    dell desktop XP . I have DSL with a Linksys wireless
    router. After many hours on the phone I was able to
    get the ineternet set up for me and my wife.
    After all this I found that my Airport Express system
    couldn't connect to my stereo. It seems that the
    router wireless connection pays no attention to
    Airport. Apple says that they could set up another
    wireless system to work for Itunes by using my
    wireless card in the Laptop.
    But... I can't listen to the music and surf the net
    at the same time. A linksys person has tried to allow
    Linksys to accept and proper installation to the
    router. I tried is but it didn't work.
    Dell Laptop   Windows
    XP   Wireless card and Linksys
    router
    Dell
    Laptop   Windows XP   Wireless card and
    Linksys router
    Sort of new here and to the AE, but have a Dell Desktop and Tosbiba laptop both running XPHome SP2, and on dialup
    The Linksys router is hooked to the desktop with an ethernet cable. In the office.
    The AE is in the living room and works great for surfing and ITunes.
    The only way I could get my AE to work as an access point for dialup and stream ITunes from the laptop to the home theater was to use the setup found here.
    http://rgbdream.com/?p=44
    The only problem I had with the setup was do not use the $ when entering the password. And had to use a proxy server on the desktop for sharing the dialup. LOL no hope of any broadband here.
    Hope this is some help.
    Bob

  • Airport Express used only to AirPrint

    My Mom has an iPad3G and I want to add an AirPort Express and an AirPort capable printer.  I remember printing through my AirPort Extreme during a cable(phone and Internet) outage a while ago.  The printer worked just fine.  How can I set this up in my house (with wireless Internet) BEFORE I pack everything up and head to Upstate NY to install both?? 
    Thanks,
    GoalieJG

    If your mom wants to print from a pad, get her an AirPrint enabled printer.  You do not need to mess with an airport and a network printer, as that will not work anyway.  Almost any router will support an AirPrint printer on her existing network.
    http://support.apple.com/kb/ht4356

  • Apple Airport Express NOT Working! Internet IS working.

    I have Apple Airport Express.  It is wireless and multiple computers as well as cable are all able to access internet because of this handy device.  However I have unplugged it because I was having an issue with Apple TV... and I plugged everything back in and I won't get internet.  I called my internet provider and they had me hook up the internet directly to my laptop (skipping the Apple Airport Express) and now I have internet again!    However, I only have internet on the one computer that is hooked up... not all the computers/TVs/Apple TVs/iPad in the house.
    It isn't an issue with the internet provider because I can get internet.  I can't help but think that it is a problem with the Apple Airport Express.  I've unplugged everything, waited a few minutes and plugged everything back in.  I've done this a few times.  Nothing seems to work.  What am I doing wrong?  I was working fine before the first time I unplugged (and that was due to another Apple device, I think, going wrong).
    Help!

    Morning zannahdoll,
    Thanks for using Apple Support Communities.
    Some Internet service providers use a method called "hardware access provisioning" to regulate access to their networks. It normally means that only one of your devices (such as a computer, base station, or router) can connect directly to your modem at any given time.
    For more information on this, take a look at this article:
    AirPort Base Station: ISP provisioning may prevent Internet connection via broadband (cable or DSL)
    http://support.apple.com/kb/ht2460
    Hope this helps,
    Mario

  • I am trying to link our xbox and PC into our wireless network.  I am using an apple airport express and it is asking me for a WEP Key.  Where can I find my wep key?

    I am tyrying to link our xbox and PC int oour wireless network.  I am using an apple airport express and it is asking for my WEP Key.  Where do I find it?

    You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
    Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
    **Edit
    Airport does support the WEP protocol.
    Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

  • Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers

    Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers?

    I got an additional question bout this topic:
    is it possible to use both at the same time? in my case cable-connected speakers in the living-room and an Airplay-speaker in the bathroom and/or kitchen?
    so I select the Airport Express as Airplay-Output on my iPad and from there it's shared via cable AND wireless? this would solve the problem of being able to only select ONE Airplay-Output on my iPad at the same time...

  • I have a nokia siemens router. Can I use apple airport express with this to expand my wi-fi range

    I HAVE A NOKIA SIEMENS ROUTER. THROUGH THAT I AM USIING WI-FI NETWORK AT MY HOME. I WANT TO EXTEND ITS RANGE SO I BUY AIRPORT EXPRESS. CAN I USE WITH THIS ROUTER

    Please do not type in all capital letters. It is difficult to read and appears as if you are SHOUTING.
    You can use the AirPort Express to provide more wireless coverage for your router if you connect an Ethernet cable from the router to the AirPort Express and configure it to "create a wireless network" using the same wireless network name, security settings and password as your Siemens router.
    If you are asking if you can use the Express to extend the wireless network using wireless only, it is extremely unlikely that this will work since Apple's "extend" a wireless network feature appears to work only with other Apple products.
    As far as we know, it is not compatible with devices from any other manufacturer.

  • Using Airport Express with ONLY a wired desktop.

    Is there a way that i may be able to wire straight out ouf a cable modem directly into a 4 port hub and then from there to a desktop and also to the apple airport express? I guess what I'm asking is can I play itunes with an airport express even though i'm not really using it as a wireless router as I'm hardwiring thes desktop and only trying to tuse the airport to play itunes?
    Please help...
    Thanks,
    Scrump

    If you aren't using the AX and desktop at the same time, don't use the hub at all. Connect the device that you are using directly to the cable modem.
    Whether you use the hub or connect the device you want to use directly to the cable modem, you will most likely need to reset the cable modem any time that you change from one device to another. Most cable modems will only talk to a single device after they boot. Whenever you change the Ethernet connection to another device the cable modem must be reset. Using a router would eliminate this problem since the cable modem would only see the router.

  • Apple Airport Express - Wireless Access Point

    Hi there,
    I'm planning to extend my wireless range and am wondering if the Apple Airport Express is able to connect to my wireless router (NetComm NB6Plus4WN Wireless Router).
    I'm getting a poor signal from my NetComm WR downstairs and wondering whether the Airport Express will extend the range.
    Lastly, is it easy to setup on Windows 7? I tried a TP Link wireless access point router but found it difficult to setup and wasn't able to get it working.
    Thanks.
    Vimal

    I'm planning to extend my wireless range and am wondering if the Apple Airport Express is able to connect to my wireless router (NetComm NB6Plus4WN Wireless Router).
    If you are planning to connect the AirPort Express to your router using an ethernet connection, this should be relatively straightforward to achieve. If you are asking if you can do this using wireless only, the AirPort Express would not be compatible with your router for this purpose. Both your main router and remote need to be Apple"n" devices for the "extend a wireless network" feature to work correctly.
    Post back if you need more info on how to configure the AirPort Express if you can use the ethernet connection method.
    The AirPorts are configured using AirPort Utility. It features both a guided setup option or a manual setup option.

  • Erro 3256 using Apple Airport Express with Windows XP Pro SP2

    I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
    It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
    I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
    exactly the same distance over the same network.
    How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
    I keep getting "unknown error occurred 3256"
    Help please. Do I have to do something to the network? or???
    Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

    Got the error message 3256 after downloaded latest itunes version 8.xx.
    After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

  • Is apple tv convenient compared to airport express when it comes to audio airplay ? (all i need to do is , switch on my airport express)

    is apple tv (2nd gen) convenient compared to airport express when it comes to audio airplay ?
    i currently have my amp connected via optical cable to my airport express , everytime i want to listen to songs from my iphone , all i need to is switch on my amp and airport express , and then play from my iphone.
    the following are my doubts
    1.i know that apple tv has mirroring and video airplay as well , but will it play audio songs from my iphone , just like my AE without any hassle of clicking anything or do i need to switch on my tv and opt for some settings ? ( my point is , is it as simple as AE or do i need to select a setting or 2 , i really dont have the patience of selecting any settings nor switch on the tv , my AE is **** simple cause all i need to do is switch it on )
    2.i have a airplay enabled amp in other room , can i play a video from my itunes to apple tv (2nd gen ) and amp at the same time ? since the apple tv will play video also , will the audio play at the same time on both the apple tv and my airplay enabled amp ? or is there a lag between the 2 ,cause apple tv needs to play the video as well ?
    3.can my airplay amp + apple tv + airport express play music at the same time when played through itunes ? ( its a music video , so apple tv will play video also ) without the lag ?

    mattliggins wrote:
    Would you recommend this set up
    i would. i've got one of the original 40 GB units and it is probably the most-used gadget in my arsenal.
    other users here will probably try to sell the new mini to you (due to it has an HDMI interface and whatnot) but IMHO nothing beats the ATV for ease-of-use.
    Is there a new Apple TV coming out soon or should I just go ahead and get involved!?
    there's rumor out there that a new model is in the pipe. however, nobody here would know when it is due and what features a new model will pack.
    if you have the budget, go for it
    JGG

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • HT4437 How to stream audio from a Safari web site to Airport Express using Airplay?

    I'm able to stream audio from iTunes to my Airport Express using Airplay, but I can't stream audio from SoundCloud.com or any other system audio (not in iTunes) to the Airport Express. It is my understanding that AirFoil can do the trick but I do not want to spend 25$ if there is another way to do it.
    Thanks in advance.

    Tgara wrote:
    grunta22 wrote:
    I have played around and it's all fixed (not sure what I did and I don't think it was working all along), Tgara, you're right the icon colour has changed to orange for music (but still blue for you tube). 
    Cheers
    Good you got it sorted!
    I was wrong about one thing.   Regardless of how I connect (e.g., wifi or Bluetooth), the Airplay icon in an Apple App turns orange when connected to a device, not blue as I mentioned above.  This is probably why you see blue in the Youtube app.
    OK, I am retracting all my posts about the airplay icon and it's color scheme. 
    Seems as if the airplay icon on the music app is orange, but the airplay icon on the podcast app is blue. There appears to be no rhyme or reason to these color schemes or their significance, so I am abandoning all further speculation. 

  • Using a Airport Express Base Station for wireless printing.

    Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

    thanks for the reply,   I couldn't connect with the base station.  The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established.  Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured.  Got home and it worked like a charm.  Would have never known what he knew.  Thank you genius bar.  Thank you for taking time to respond.

Maybe you are looking for

  • ZBUS2032 not shown in workflow and status in SWEL- no receiver entered

    I am trying to change an existing workflow(This one has the standard BO- BUS2032 linked). Now I am trying to link the same workflow to a custom BO(ZBUS2032) copied from BUS2032. This custom BO is generated, released, delegated. I have maintained the

  • My Adobe Illustrator CC

    Please I need help! I bought the monthly cancel at anytime subscription to Adobe Illustrator CC and it donwloaded fine. But after downloading it last night, it kept opening then infroming me that it has stopped working correctly. I need some help as

  • For home sharing do all computers have to be on same wifi?

    I have iTunes at home, I would like to get it at work also. Is this possible since it's on 2 different internet connections?

  • Substitution varibles in plaing application

    How To Create Substitution varibles in planning application,can u explain in brief.... thanks in advance...cheers

  • Cdc states from ILEND to ILEND through ILUPDATE

    Hi Everybody, I am starting with CDC and I have a problem. After Initial Load, I have to run the Incremental Load several times to capture changes. I noticed that in the cdc_states table, the state after the Initial Load package goes from ILStart to