Apple airport express will not work with my iPad ?

Apple network. Cannot be set up by this soft ware  ( this is the message I get when trying to set uo apple airport express

I'd take a free Express.
Use AirPort Utility - it's free too.

Similar Messages

  • Need Help...my wireless airport express will not work with my update of snow leopard

    after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

    If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • TS3274 My wireless will not work with my iPAD?

    My wireless connection works everywhere else in my home, but will not work on my iPad.  When I try to connect, it says it is unable to join the network.

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Try restarting the router/gateway.

  • After Leopard install, all three Airport Expresses will not work...

    I have three Airport Express' that worked completely fine before I installed Leopard. After the installation, the Airport Utility will not even detect them. No matter how many times I try to reset them, unplug them, or yell at them, they will not be recognized by the Airport Utility. Currently, all three units are completely useless and just flashing amber. I have tried to look through the topics to see if anyone else has the same issue but, I could not find one that seem to be a duplicate of this problem.
    Please help.
    -F.

    My guess - are you trying to connect to them wirelessly?
    If so, the only solution I found was to hook them up with an ethernet cable to the Mac.
    Airport then finds them OK and you can upgrade the firmware / software to latest versions.
    Hope that helps
    Andy

  • Airport express G not working with new linksys N router

    I just swapped a new linksys N router into my old G network and my old airport express is flashing amber and refusing to acknowledge the network. It does not seem to be picking up. What does this mean and how do i fix it? thank you in advance

    someone posted this anyone , not sure i actually understand all of it
    hours of digging through blogs and Apple help docs, with some luck and trial & error, have gotten it to work. This experience seals the deal...if a Mac can ever run Excel, I'm abandoning my PC.
    For the benefit of anyone else in my situation, here's what I did:
    You have to override Airport Express's default desire to make itself the hub of a new network, and force it to be added as a client to your own network.
    First, plug the Airport Express into the wall, then reset it by holding down the reset button with a paper clip for about ten seconds. Plug in an ethernet cord that's attached to your wireless router.
    Open the Airport utility which you should've installed from the cd in the package. It should now recognize your Airport Express and the light will turn green. Be patient...mine took awhile, and even started flashing amber before it worked.
    You will need to manually configure the AE from the utility by typing in the name of your wireless network, setting AE to "join an existing network" instead of its default "create new network," and enable Airtunes.
    You may need to add the "Airport ID" printed on the case of the unit to your router's MAC list. This allows the router to recognize the device. Type your router's IP address into the address bar of internet explorer to access the router settings.
    If you don't see your speakers listed in a box at the bottom of iTunes, you will need to go to the settings window (in iTunes) and click "search for remote speakers connected to Airtunes."
    gonna try it out, cause nothing else has worked

  • Airport Express/AirTunes Not Working with New Verizon FIOS Connection

    I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
    In more detail:
    Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
    Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
    Any help would be appreciated.
    Thanks!

    Still no luck. The green light is on for the AE.
    Thanks in advance for the help.

  • Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

    Hi,
    I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
    Thanks for your time.

    The same thing started happening to me this morning.  I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes.  Everything worked fine until this morning.  I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything.  The problem persisted.  However, I had no problem playng music from my iPad library through the system using the iPad. 
    I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app.  Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro.  I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message.  When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time.  When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help. 
    For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

  • Apple Mail Still Will Not Work with Verizon

    Greetings to All:
    Sunday, March 24, 2013
    I've been trying to get Apple Mail to work with Verizon email for some years without success. I read the boards and find that this is not an uncommon problem. I received the new server settings for Verizon email today and eagerly plugged them in thinking this would solve my problems with receiving Verizon email, but, alas, it did not. Microsoft Outlook does a dandy job of pulling in Verizon email, but Apple Mail cannot. It's ridiculous that I should have to jump over to another email app to open one email account. All of the settings have been checked and double checked and the machine rebooted as the instructions mandate. 
    I don't understand what the problem is with Apple Mail and Verizon email. Apple Mail pulls in just about every other email service without flaw. Does anybody out there have any insight into this?
    -Dr. John

    I am beyond frustrated with this issue.  I've just spent 90 minutes on the phone with verizon support and it couldn't be fixed.  I was told to call Apple.  HAH!  "Please call during normal business hours."  Would anyone know what they are???!
    I did NOT have trouble until I changed the servers, per Verizon's request. I am so happy I didn't futz aroudn with my iPad.

  • Why my older Airport Express does not work with OS-X 10.9?

    After getting my new iMac and upgrading to Marveric, I can not get my older AirPort Express work. Why?

    Mavericks does not support the older "b/g" wireless versions of the AirPorts, only the newer "n" wireless versions.
    You can use another Mac running Leopard or Snow Leopard, or a PC to administer the older AirPort Express.

  • USB printer on my Airport Express will not work..

    Hi, using the newest Airport Express to extend my network. Tried now to use it via USB to get a network printer. The printer (Canon Pixma MP 970) shows on my list for printers to add. When to install my Mac asks me to install the newest software, there is no possibility to say no and just continue. After a yes I get allways the same message, it is not possible to download the newest software from the server. There after the dialoge quiets and I cannot add the printer. Trying solving the problem manually by downloading the newest software from Canon I just get a note that I am not allowed to download from this page new software in order to security policy of Apple. I have to do it from the app store. Here I do not find a newer driver for my printer....what to do? My IOS X is 10.8.2.

    See if this helps you.
    http://www.ifelix.co.uk/tech/1011.html
    If not, you don't mention which Windows version you are using check iFelix's Site.
    http://www.ifelix.co.uk/tech/
    Cheers Don

  • Bluetooth recently will not work with my iPad 2 or with iPhone4

    Bluetooth on my iPad2 and iPhone4 worked fine until recently. The only change is operating system upgrade so must be some problems with the upgrade. apple is really dropping the ball with their operating system upgrades. The operating system upgrades create more new problems ratther than correct prior probrlems.

    This form is for technical help with the iPod Classic, not the iPad.  Post this in the iPad forums.
    https://discussions.apple.com/community/ipad
    B-rock

  • Downloading Applications will NOT work with my iPad 2 at ALL

    I can get on the Internet and anything, but I cannot download applications although I can look at applications via "App Store". What can I do?

    This form is for technical help with the iPod Classic, not the iPad.  Post this in the iPad forums.
    https://discussions.apple.com/community/ipad
    B-rock

  • I am considering purchase of Airport Express to extend / improve my network at home. I have read that AE will not work with a non apple set up. Does this mean my BT Homehub will not work with AE?

    I have poor router connection to my iphone in one part of my three storey home. I have a BT Homehub router. I am considering purchase of Airport Express to improve my network connection. Will AE function with the Homehub.  I have read that it may not! Any advice please?
    Geoff Snr

    The AirPort Express will work with the Homehub if you establish a permanent Ethernet connection from one of the LAN <-> ports on the Homehub to the WAN "O" port on the AirPort Express.
    The AirPort Express will not work if you are planning to connect the Express to the Homehub wirelessly to extend the network.

  • Updated airport utility will not work on older Airport Extreme

    I have a mid-2011 Macbook Air with OS 10.9.4. So that's up-to-date. I recently updated my Airport Utility to version 6.2. I have an old Airport Extreme. The new Airport utility will not work with the old Airport Extreme. Apple will not let me download the older Airport Utility, because I have a newer one installed: classic Catch-22. Any ideas? I need to find out my SSID to connect with a new Denon AVR receiver. Is there any way to find out my SSID with Airport Utility?

    You must first uninstall AU 6.2 before you can install an older version. This may be removed by the mods so get it while you can:
    AirPort Utility 5.6.1 on OS X 10.9 Mavericks | Corey J. Mahler
    Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is

Maybe you are looking for

  • Link to network document - cannot find file

    I have a report which needs to provide links to pdf files on a protected network resource.  Meaning that the user of the Crystal Report does not have native access to the network resource, not even read access.  Is there any way to configure the link

  • Error deploying app to 10g 1.3 with SQLServer drivers...

    I developed a web application using JDeveloper 10.1.3 using Microsofts SQL Drivers to access SQLServer databases. The defined data sources work fine under the built in OC4j in Jedeveloper (10.1.3). The problem I encounter is when I try to deploy it t

  • Alternative to join

    I have got a query which is a join of 6 queries. Is there an option to replace the join? The db version is 9.2.0.1.0.

  • Process chains in NW2004s

    Hi, Can any one please send me some docs/links regarding the upgradations of process chains in NW2004s. Thank You. Vaishu

  • Adding URL To Object

    I'm Trying to add a live support URL to a symbol in an all Flash site - http://www.netpro-solutions.com/ar_80009.swf I've have these instructions: Step 1: Copy the following code to the HTML page containing the FLASH object: <script language='JavaScr