Apple AirPrint, talktalk router DSL 3780, HP PHOTOSMART printer 3780

I have gone through the whole raft of solutions to AirPrint from my ipad3, I am up to date with ios 8.1.3, my printer software is also up to date. My router DSL 3780 was supplied by talktalk about 12 months ago, But I still cannot locate air printer on the iPad... Can anyone help. Pretty please.

Hi @Daveeh,
Welcome to the HP Support Forums! I see you are running into some problems locating your HP Photosmart 5520 on your iPad.
I would like you to take a look here: Printing Over a Wireless Network with Apple's AirPrint FAQs, once on the page please complete the steps listed under the 'What if a 'No AirPrint Printers Found' message displays on my Apple device?' section.
I hope this helps, please let me know the outcome.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • We just set up an apple airport wireless router but i can't print from iPad to hp officejet all in one J4680.  the iPad is connected to  the network as well as the printer, but it doesn't print

    How can I get my ipad to print to HP J4680 through apples airport wireless router

    Hello ddoonis,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    Have a nice day,
    Mario

  • Can Photosmart C6180 support Apple Airprint - I want to print from my Ipad.

    Can Photosmart C6180  support Apple Airprint - I want to print from my Ipad. Are there setup steps I should make or Is there a driver download to facilitate this?

    Hi,
    The C6180 does not AirPrint compatible.
    However you may still print by using the HP ePrint Home & Biz App.
    You may find out how to get and use the app below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=1153494&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I followed all of HP's Apple AirPrint troubleshooting instructions. Printer still doesn't print.

    Using an HP Photosmart Plus B210a printer, I attempted to print both photos and emails from my Apple iPhone 4 via WIFI interface.  My router is a Motorola SURFBoard SBG6580.  All connections have been tested and verified active.  The printer is shown on my iPhone as active, and messages following my directive to print indicate "contacting", "preparing", and "printing 1 of 2", etc.  Then nothing.  No print.  I followed the HP's troubleshooting instructions for "Apple AirPrint:  The Apple Mobile Device Shows a Job is Printing but the Printer Does Not Print", without success.  I am able to successfully print from my HP Pavilion Entertainment  PC with Windows 7 using the same WIFI interface without problems.
    The Motorola router is a recent addition to my system.  HP's prompt following my unsuccessful resolution of this problem was to post a message to see if anyone else has dealt with this problem.  Thanks for your input.
    This question was solved.
    View Solution.

    One additional step that you could try doing is to do a hard reset on the iPhone. Make sure if you have anything open that has not been saved you save those items first.
    Press and hold the power and the home button together for 15 seconds. You may see slide to power off come on the screen but ignore that and continue holding the buttons until the device turns off. Depending on the exact model the device may automatically turn back on when you let go and show the apple logo, or you may have to manually turn it back on with the power button.
    After the device loads back up attempt to print again.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

    Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

    This happened to me when I was setting up the wireless router for a friend.  The issue is with the Westall modem.  You need to go in and setup the "bridge" option on the westell modem.  The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
    http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
    Good luck
    Solution:
    Method 1 - Hard Reset
    Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
    After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
    Method 2 – Bridged Mode
    Access the Westell interface using http://192.168.1.254 or http://launchmodem.
    Click on the Broadband DSL Line button. 
    Click on the Protocols button 
    Select the radio button to the left of Option 2 (Bridge)
    Click the save button. Once the modem has restarted it is in bridge mode. 
    ALL STEPS COMPLETE

  • Upgrade Deskjet 3050 all in one J610 to print Apple AirPrint?

    Anyone knows if you can upgrade Deskjet 3050 all-in-one j610 to print AirPrint from my Ipad?
    Or in a way to work around printing to this J-model from my Ipad?

    The Deskjet 3050 does not support AirPrint.  AirPrint requires firmware in the printer that understands the AirPrint format.
    You can use the HP ePrint application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02775166#N58
    https://itunes.apple.com/us/app/hp-eprint/id299531647?mt=8
    or
    Try the HP All-in-One Printer Remote application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    https://itunes.apple.com/us/app/hp-all-in-one-printer-remote/id469284907?mt=8
    I am an HP employee.

  • I just bought a new iMac and I am using a apple air port router.  How do I connect mt windows PC to the air port router do I can move files

    I Just purchased a 21.5 iMac and connected it to the Internet using a apple air port router.  How do I connect my windows PC to my air port router so I can transfer files.

    It makes life easier to install the airport utility for windows.. which has a couple of different apps in it.. if you airport is new type then the utility is too old.. but is still valuable for Bonjour which provides network information for shared devices in the apple world to windows.. and a disk access agent..
    It will also help the Apple computer access shared directory in the windows computer.. nowadays this is pretty easy.

  • Connecting Apple TV to router with ethernet cable

    help connecting Apple TV to router with ethernet cable

    The process is transparent. I have done it before.
    Now, it gives me an error message when I try Wi-Fi:
    "There was a problem connecting to the network. Check your settings and try again.(5)"
    When I try the ethernet cable connection it won't let me do automatic or custom.
    I unplugged and replugged the Apple TV box but don't know how else to trouble shoot the lack of connectivity.

  • I am trying to connect my Photosmart Printer to my wireless router

    I need to get directions on how to connect NETGEAR wireless router to HP Photosmart printer.

    Hi,
    What is your printer ? And what is the Operating system of your computer ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Apple download for HP Photosmart printer C4280

    I have Snow Leopard and think my printer is older and not compatable to Snow Leopard. Can Apple give my something to make HP Photosmart C4280 compatable with my MAC?

    Change your Gatekeeper settings.  Go to System Preferences>Security & Privacy>General.  Change your setting to "Allow applications downloaded from" to "Anywhere"
    You posted in the wrong forum - Snow Leopard. 
    Your system profile confirms you are using Mountain Lion.  Proof is the "Apple can't accept message" you received about the download.  This does not happen in SL.
    Will have a HOST move your post to the proper forum.

  • Can't print from my apple AirPrint to my hp envy

    I have had this problem before that my apple AirPrint will not talk to my hp envy and will not print
    This question was solved.
    View Solution.

    Thanx Terilynn for your help. Thankfully it was an easy fix as I am not tech savvy. Hopefully I will remember it if it happens again and my anxiety level has gone back to normal.

  • My apple devices, in particular my MacBook Pro, have stopped recognizing HP Photosmart printer 6510

    My apple devices, in particular my MacBook Pro, have stopped recognizing HP Photosmart printer 6510.  

    Hi there @T707 , welcome to the forums
    I read about how your Mac book Pro running 10.10 is no longer recognizing your Photosmart 6510.
    Please respond with the following information and I will look into this for you!
    Can you make copies from the front panel of the printer?
    How are you connecting the printer to your MacBook? wireless, USB or ethernet
    If you haven't yet tried these steps, try them in order:
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Click this link and download the full feature driver: HP Photosmart 6510 series Full Feature Software and Drivers - OS X 10.9 Mavericks
    In addition, download this driver: HP Printer Drivers v3.0 for OS X
    I hope to hear from you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • TV screen frozen on Apple logo after pressing select button on remote.  Have powered off Apple TV and router.

    TV screen is frozen after pressing select button on remote.  Have powered off both Apple TV and router. Menu does not come up. All that is on TV screen is Apple logo with black screen.

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • How can i print from an ipad to my B109n photosmart printer

    how can i print from an ipad to my B109n photosmart printer? 

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    iPhone: http://www.apple.com/support/iphone/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Photosmart printer will not connect to network, unable to set IP Address Manually

    My Photosmart printer has worked fine for a long time but it now refuses to connect to the network.  It is wired into the router and I have changed the lead and this shows no chnage.  The Printer network set-up shows an IP address of 0.0.0.0 in manual mode and if I reset this and press OK it immediately reverts to 0.0.0.0.  I've also tried putting the printer into Automatic IP address but it still fails.  Subnet Mask and Default Gateway also show as 0.0.0.0.  I can reset the Subnet Mask and Gateway to the correct levels but as soon as I go back to set the IP address they revert to 0.0.0.0.  The printer will work from a USB connection but it will then not share correctly.   Is it possible to reboot the onboard program?

    Oh, an ISP-supplied router.  Uggh.
    OK, remove the phone (DSL) cord from the back of the router.  Cycle power on the router, then attach the printer with the phone cord disconnected.
    Now, Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for