Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes and then install iTunes again. Error 2. please.. help
Can someone help me? been stuck with this problem.. and i need too install this, so i can use my iphone.
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2
Similar Messages
-
apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?
You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
See also Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
iTunes u closes as soon as I open it. What should I do?
I would start with this FAQ Entry first, if you have not done so yet: http://forums.adobe.com/thread/792580?tstart=0
It starts with a checklist for getting PrE set up properly, then moves into tuning up one's system and OS (you have done a lot of that already), and then goes into troubleshooting tips. Note: those tips rather work up quickly in "degree of difficulty," and DO become quite technical, but things like the "Finding Clues" link will give some tools, that might prove useful, like the use of Windows' Event Viewer to track down issues.
One of the first things to look at would be your video driver. I would go to the video card's/chip's mfgr's. Web site, and check for a later driver. Do not trust Windows, or any utility to tell you if you have the latest driver. If there is not a newer video driver, or it will not install properly on your system, be sure to check with the HP Web site, as HP, Dell, Lenovo, and some other mfgrs. will re-package video drivers to suit their specific setup.
One troubleshooting technique, that might prove useful (however, those deleted programs bother me a bit here), would be to create a System Restore Point for now (see Windows Help for doing this with your particular OS version). Then, boot to Safe Mode, and choose an older System Restore Point, from when things did work. This might take some trial-and-error, to get back far enough. Test. At the worst, you will only have lost a few minutes, as you have your new System Restore Point for now, to fall back on.
Good luck,
Hunt -
I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
"apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanksLet's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error 'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??
Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
Uninstalled /reinstalled
Disconnected all firewalls and antivirus and even uninstalled them with Revo..
with that effort..I then used winrar to extract to a file and manually install each piece..
all load EXCEPT Apple Application Support..but only if I do it manually..
Quicktime had to be manually installed.
Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
Windows Installer likes to quit alot..not sure how to fix that..urgh
Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
Any help is much appreciated! -
I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
LgInstall 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
Hi all,
We are having issues with Adobe Bridge working properly with Photoshop. When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
- We have the Master Collection CS6 installed
- Bridge CS6 is working fine as a stand-alone program
- This is installed on Windows 7 x64
- I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
- All adobe products are up-to-date as of this morning.
Any help would be appreciated.
Thanks,
Message title was edited by: Brett NBacterin1 wrote:
It has not worked previously.
Does not make a difference is bridge is open or not.
Yes, we are accessing it through File/browse in bridge.
OK, back to square 1.
Does Bridge work normally? Does it load Bridge CS6 or does CS5 come up? Only one version can run at same time.
If you double click on an image it opens in CS6? -
my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help
I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.
-
So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Document was not found in search results after full crawl run for a sharepoint web application.
Hi
in a sharepoint farm i started full crawl , and after when i search a document with its name its was not display in search results.
how to trace this issue
adilHI
i started full crawl for content source and
when i search a document with s it s documentid :
the document was found,
but when i search same document with its name it was not found.
the documents those not found with its name was last month documents only and before
that old documents was found in search results when i search with its name value.
- the last month we moved the content database storage to new location
- i stopped all sharepoint services including search (stopped crawling ) and started again when storage
migration completed
adil -
Why my iPad cannot connect to app store
The App Store app is a built-in app, it can't be deleted.
What have you tried to fix it ? If you haven't already done so then you could try the following :
- log out of your account (tap on it in Settings > iTunes & App Store) and then log back in
- close the App Store app via the iPad's multitasking bar and see if it works when you re-open it : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
- a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I am using a 64bit fresh installation of windows 8.1 laptop with the latest 27.0.1 version of firefox. I have been getting start up error messages. The messages claimed that each of nss3.dll, mozglue.dll,plc4.dll,plds4.dll could not be found in windows. I found a good fix explanation on a site where I could download these missing files and copy them to the system folders on windows (in sytstem32 and sysWOW for 64 bit) Each time the error message popped up the next dll file missing and most recently the message has changed to “ command.exe entry point not found” NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll As I can find no reference to this on the net I was hoping you might be able to shed some light on the problem.
I have tried reinstalling and I have also tried the reset option in troubleshooting but the problem remains after restoring my FF backup settings. A completely fresh installation does remove the problem but the first installation of a new extension add on (but seemingly not plug-in) and the problem returns regardless of which add-on.I posted this question after the best part of 2 days trying to eliminate this, admittedly small but, irritating error. Some hours later I note the problem has gone away which I think is most likely down to a clean-up job done by the WiseCare 365 software.
-
Airport Express (AX) not found after restart....driving me mad, please help...!
Hello,
I tried to search for this issue but never found the solution. In the meantime, it drives me mad......so please do respond if you know the answer.
Here is the problem. I have a WDS setup for our home, time capsule as base and several airport extremes (AX) for the wifi net through the house. In addition there is one AX for iTunes and I have one setup for the printer. Untill last week everything worked just fine. However, after installing a new printer, the printer AX blinked amber. I performed a reset and went through the setup, my AirPort Utility found it right away. I followed the steps for setting it up to join my current wireless network (usb printer). However, after the message: "The settings for this AirPort Express have been successfully updated. You can close this window or wait for this AirPort Express to restart" , the AX restarted, I finally got a message telling me there was an error joining my network. So I closed the ultility, resetted the AX and went through the process again. Unfortunately, the same result. Tried to connect the old printer, same result. Tried another AX, same result. Tried connecting it with a LAN cable, same result. It all goes fine untill right after the restart phase. NExt the AX is not recognized.
As nothing has been changed in the meantime, I have no clue at all what might be the problem. Anyone ????
Looking forward to the answer, untill now, I have not been able to find a solution.
Kind regards,
MarkMark,
I am having the same problem. I found this website, not sure if you have already given this a try.
http://adamantventures.com/blog/airport-express-setup-troubleshooting/
Maybe you are looking for
-
Problem in Creating Default Form Through DI API
Hi All, I am using the below code to create UDO and make it as Default Form through DI API. But the Default Form property is not getting set, that is the Default Form is not being created. The UDO is getting created. Any help is appreciated. // Verif
-
Why can't I select or update the Record using the PreparedStatement?
the DB is oracle9i,here is the test table test id number; name char(10); intro char(10); I have insert a record in the table. Now I will select or update the record by using the PreparedStatement here is my code: sqlStr = "update test set intro = ? w
-
Can you connect 5th generation i-pod to portable dvd player
I have recently purchased an Amstrad portable dvd player and was wondering if it is possible to view my saved movies from my i-pod video onto my portable dvd player. Was told by local shop it wasn't as you only had option of audio and not video. The
-
How does the caption feature of the thumbnail slideshow widget work?
I load my images into the widget and the caption is a numbered sequence of the placeholder text. In the metadata of the images I have added something in the caption box via lightroom but cannot get it to show up when I preview. What do I need to do t
-
Opening ipod mp3 files on a different computer?
My friend brought over his ipod to show me. We hooked it up to my mac to check out what would happen if I wanted to copy his stuff to my itunes library. Just got a mesage asking if I wanted to replace the stuff in his library with the stuff in my lib